2-Port

This product worked really well. There are no leaks, easy to twist on, I can use one port or two, the caps stay on very well and are reusable. Water flow appears to be uninhibited, which was perfect for me because I like to control the flow at my drip line spout, because I have different water needs in my garden and flower bed.

I needed an extension to reach another part of the plant with this piece I was able to do it. I will be ordering more for my other plants

Great for drip irrigation, bought quite a few. The connectors do break every so often, somewhat expected. Would be better if the angle connectors are made of nylon instead of plastic.

Works perfectly for my system, connecting two 1/4-inch ID irrigation lines to my watering circuit. The 1/4-inch irrigation line ports (barbs) hold my irrigation lines securely. There are no leaks even with full home water pressure and most irrigation bubblers on those lines turned off. However, I take one star off for a design flaw that caused me to change the way I installed the part. I did not use the enclosed gasket/filter basket. Two reasons: First, my system is already protected by a filter upstream (before the irrigation timer), so I didn't need redundant protection in this connection. More importantly, quick inspection reveals the enclosed cage if installed would be resting directly on the tiny tabs that retain the 1/4-inch ports in place. If you tighten everything down, it seems obvious the pipe being screwed into the cage/gasket would put a lot of force on the back of those ports -- in effect trying to push them out from the back out of the housing. (The tabs holding those ports in place are only plastic and they are small -- almost certainly the weakest part of the overall structure.) I imagine this is the cause of some leaks and breaks reported in other reviews. Instead of using the gasket/basket, I left it out and used PFTE plumber's tape to seal the fitting threads; then I did not need to tighten the pipes down so hard that the connector put pressure on the back of the ports. As installed (minus basket, plus PFTE tape), the ports are firmly in place, everything works well, and no leaks. I will write back to update this review if any problems develop in the next year, but I believe that avoiding use of a gasket seal and instead using plumber's tape likely eliminated the mechanical torque on the internal components that could otherwise cause premature failure.

These are great for my drip system. They need to be reprised about every 2 to 3 years.

Easy set. Just replace your sprinkler head with this. Recommend using the pressure regulator so the 1/4 heads don’t pop off

Works as advertised

This tool makes directing the flow of water to pots to make sure they are getting enough water. Easy to install.

These do the job well. And they have screw-on caps for oultlets not being used. The other type with the fixed outlets do not have screw-on caps, so there is no way to cap an unused outlet. However these pivotting outlet type break down much quicker in hot sun. So depends what you are looking for.

Does was should do

Buen producto, creo fugas.

I couldn’t used it, I ordered the wrong size. Looks very sturdy.

Bien