TAURI [Designed for Samsung Galaxy S21 Ultra 5G, 2 Pack Flexible TPU Screen Protector + Camera Lens Protector, Support Fingerprint Unlock, Easy Installation, Bubble Free]

I just got my new Samsung S21 Ultra and I was really nervous to try this because I stink at installing screen protectors. Given the price it seemed too good to be true, but the reviews were excellent and I bought it. I have always had the expensive screen protector products on my phones, and though I'm not rough with my phone and keep it in a designated spot in my purse, every single one of the screen protectors had scratches within 2 weeks, and typically a bubble or more that never went away. I watched this video first a couple of times on my computer, and then once I began to install it I paused the video at each step of the instructions until I finished - (again, because I stink at installing these things.) If you're like me, make sure you follow every step of the easy instructions and use the squeeze card as instructed. I even screwed up once by not starting at the correct line on the final step when using the squeeze card and thought I had really messed up. However, when I removed the alignment mount from the port and pulled off the film, not only was it installed perfectly, there were no bubbles at all. Not one. I truly can't even tell the screen protector is on. The HUGE bonus is the little alignment mount that gently plugs into your charging port. That was the game changer. You can't mess up the alignment process nor do you have to worry about getting the protector on straight. **Also, it DOES work with my the finger print sensor. I then installed the camera lens protector as well. I had a harder time with that only because both the phone and lens were black, and it was a bit harder to make sure I had it matched up up correctly. Given my bad experiences with screen protectors, this time Instead of buying another OtterBox phone case I went a different route and bought a Tucch wallet magnetic phone case for extra protection for the front of the phone. I don't plan on putting cards in it, so we'll see how it does with scratch resistance. Update: I have had this on for a month and still give 5 stars. It has tried to come up a little at the bottom, but it's because of the case I have it in. I just simply used my cloth and pushed it back down and it's been fine.

I'm loving this screen protector so far. This is the first time I've ever had a screen protector go on without any dust, bubbles or imperfections, e.g. you can't tell it's there. But, it does have a learning curve and full disclosure, I had to use both protectors as I messed up the first attempt. Finger print and touch sensitivity works great without having to use the option to increase sensitivity on the phone. The edges cover the corners well without encroaching on the space of the case cover edges. Here's my lessons learned on applying. The application method is pretty ingenious, less the charge port line up utility. I found that when trying to use this, the protector is just a hair too low on the phone. So I cleaned the phone, peeled the center piece, then used the top and bottom yellow tabs to line it up without the charge port tool. Scrape the center with the scraping tool per the instructions to remove bubbles. The next part was a little confusing. You have to peel the top down, remove the yellow protection film, squeegee the top back down, then repeat with the bottom, almost like how you apply the white part of a bandaid on a cut, then peel off the white parts on the underside of the tan sticky parts. This is where I made my mistake the first time. I peeled off the yellow, let it fall back into place, then tried to squeegee. My recommendation is to peel the yellow part back slowly and squeegee as you peel. This will ensure you get it down as flat as possible with minimal bubbles. Also DONT peel off the gray top cover until you get all the bubbles out! You can press much harder witth the cover on without damaging the protector. The curved edges will appear as though they are not stuck down with the gray cover still on, but they are, the gray cover just doesn't curve down with it when it sticks to the glass. The camera protector seems good too. It's hard plastic, and is manually aligned but easy enough to do. It's thin enough th where my case with a sliding camera cover still functions properly without issue. The edges also don't extend beyond the base edges, which has been a problem for me in the past. If they overlap, the case can snag on the protector and cause it to peel up, but as I said, not an issue in this case. I paired this protector with this case for reference: https://www.amazon.com/gp/aw/d/B08T9FZF6L So far I'm very pleased with the quality and value and the fact that it came with an extra set to allow me a "do-over."

This is the first TPU (sheet of plastic basically) type screen protector I have used. Always had glass of some sort before. It seems to work pretty well and certainly will keep your screen from getting scratched. I haven't dropped it yet, so drop resistance remains to be seen, but I think most of us want to avoid scratching the screen and hope the case protects from drops. The main two points to be made when comparing screen protectors is how well does the application work and how does it perform. This is a different application method than I am used to. It includes a plastic thing with pegs. You put the platic piece into the charging port of the phone and the pegs fit into holes in the bottom of the screen protector and that part is removed later. This helps align the screen protector well and helps ensure you don't cover up the hole punch for the camera up top. I think the installation worked really well, but trust me you want to watch their YouTube video, or thoroughly review the instructions before you start, or you might mess it up. I've put on a number of screen protectors and this was new to me. Had to throw one away I messed it up so bad, but you're getting 2 screen protectors so not too bad. Once it's on though you can barely tell it is there. Took me redoing a corner a couple times to get it to stay on but after that I've had no problems. Does not seem to negatively effect touch sensitivity or fingerprint reader performance at all which is a big plus. The only other thing that I think has to be mentioned is that this thing is a fingerprint magnet and a bit harder to get clean in general than the glass screen. This I have found to normally be the case with screen protectors, but it is something to keep in mind. I don't find glass screen protectors to be as hard to clean, but they crack sometimes, so nothing is perfect. If this bothers you then maybe a glass screen protector with an oleophobic coating would be better. Overall, I think this product is pretty good for the price and I would probably buy it again. The good touch sensitivity, price, and near invisible application of the protector outweighs the fingerprint accumulation for me even if the fingerprints are a bit annoying.

I've had a hard time finding a decent screen protector for my s23 ultra. I've tried so many I've lost count and this is the first good screen protector I could find. That's why I thought i would take the time to actually review this one. I don't understand why the others are all so bad for the s23 ultra. I've never had this issue with any of my other phones in the past. This screen protector actually allows the fingerprint reader to work flawlessly, it wasn't too bad to install (watch the install video), the edges aren't bubbling up, and it's lasted more than a few weeks without coming off the screen or getting nicked (time will tell if it holds up though and if it doesn't I will definately update this review). The only downside i could find is some fingerprints are showing on the screen but nothing too major.

I have purchased many screen protectors for a variety of previous phones, both film and tempered glass, and have generally preferred the tempered glass kind for the glass like feel and smoother touch experience. However, I was aware that the S21 Ultra has curved screen edges that would make a rigid tempered glass protector difficult to attach easily, and I also had concerns regarding the ability of the S21 Ultra's ultrasonic fingerprint scanner to work effectively through a tempered glass protector. As a result, I purchased this one. The application was as easy as the online instructional video indicated (you should watch the video before applying the protector). The included guide, which attaches to the USB-C port to ensure proper alignment, works well to make sure the protector is straight and doesn't cover the front camera. The protector covers the entire screen except for a tiny u-shaped cutout for that front camera. Because it is a film protector, it adheres completely to the curved edges of the S21 Ultra screen. I chose this particular protector because it also included a camera lens protector, which is glass instead of film (which is fine since there are no curved edges to the camera glass). That applied easily since it is so small. The screen protector feels very smooth, very glass-like and I am very satisfied in that it feels like the tempered glass protectors that I have been able to apply to my previous flat-screened phones. I have had the screen protector now applied for over a month and it still feels just as smooth as it initially did, and it has not developed any visible micro-scratches (see attached pic for reflective light). There may indeed be a "healing" characteristic of this film so that any micro-scratches that do develop do not persist. The fingerprint scanner works well (as for my previous iPhones with fingerprint scanners, slightly wet fingers do not scan consistently and I have to dry my hands thoroughly). The pictures from the rear camera are clear and not affected by the camera glass protector. I am very satisfied with both the screen and camera lens protectors.

I have mixed feelings about the product. I installed mine first and thought it went super well. I could barely tell the protector was on (foreshadowing). Then I did my wife's phone and was disappointed when I could just barely see the edges on hers. It still looked nice, but not nearly as seamless as mine had. I then looked back to my phone to discover, much to by chagrine, that it was not installed at all! When I tore off the final installation alignment tab on the screen protector (following their directions, of course), it had ripped the entire screen protector that I just painstakingly installed off of my phone with it! I then tried reinstalling it, just to see if it would work after crumpling it up with the disposable tab, but it was obviously too far gone. Second photo is my phone after doing this, and the first is my wife's phone, which installed just fine. I watched the installation video and read the included, printed instructions as a refresher while installing. I'm really not sure how it went so wrong except that that final alignment tab (which is adhered to the entirety of the screen protector itself) was just too sticky and peeled off the screen protector with it. I am thus giving an overall 2-star review because the company shouldn't design a product that gets torn off so easily with its disposable alignment tabs. It is a great idea to have them, though, because my wife's installed just fine and was really well aligned with the sides and the camera at the top. I do think the fingerprint reader works great, though, since it even worked through the bubbles on mine after reapplying the protector. The scratch resistance rating may change, but I'm already seeing some damage just from installation, so I'm not holding my breath. If the company reaches out to offer a replacement, I may increase my rating slightly if the next install goes well. For now, I'm just going to be extra careful until I find another solution. UPDATE: I have reached out to the company twice now for their "warranty" that is supposed to cover failed installations. Both times, I have received no response. Downgrading from 2 stars to 1. Still seems to be a decent product, but I hate dealing with companies that have zero customer support.

I've installed 4 of these. The first one was a botch - I let a hunk of dust sneak in. I tried lifting the protector and pulling the offender off with one of the included stickers. I've done this successfully with many other screen protectors, however, you can't do that with this one. The screen protector is more sticky than the sticker, so not only does the dust stay where it was, but you also wind up transferring anything else that was on the sticker to the film instead. I junked it and installed the other one successfully. I returned that phone for one with more storage 2 days later, so I junked the 2nd one and bought another pack. 3rd install went smoothly, but a portion of the edge didn't stick down all the way. I left it on for a week or so, then installed the 4th one because it was bugging me. Almost perfect, 2-3 little micro bubbles which did not go away the next day, but are livable. The look and feel is fantastic and "almost perfect" installation is pretty quick and easy. However, it simply doesn't work with the fingerprint scanner. I have re-registered my prints on 4 different fingers no less than 12 times, and none of them work even 10% of the time. I also enabled the increased touch sensitivity in the setting with no improvement. Keep in mind - that's 4 screen protectors installed 4 times on 2 phones, so I'd say there is an issue. If you have no plans to use the fingerprint scanner, it's a nice screen protector, however, do NOT buy this if you do.

I was really impressed with the packaging and application process, not to mention you get a total of 4 screen protectors (2 phone, 2 camera) for such a great price! I never really wanted a camera protector, but I have to say this one is super nice and really easy to install. Just line it up and press! It hasn't affected picture quality in the slightest. The screen protector install was also super easy, nearly dummy proof. The charging port applicator takes pretty much all the guess work out of lining it up and the step by step to actually apply the protector ensures it stays lined up. The screen protector itself is superrrrr smooth and clear, no issues whatsoever with the fingerprint scanner. I've had it installed almost a week now and not a scratch on it after being in my pocket with other things jangling around. It does get smudgy and greasy pretty easily, I don't know if I'd call it "fingerprint resistant", but I've yet to find a screen protector that actually is, despite their claims otherwise 😅 wiping it clean with a t-shirt or cloth is no biggie and it looks good as new.