Temptooth - Temporary Tooth Replacement Product

Helped me in a embarressing situation . Temp tooth mould stayed in till I got replacement at dentist. Would say it was more of a temp . Don’t eat a curry with it in as it turns it yellow. 🥴 All in all a good temp. 👍🏼

Would give zero stars if I could despite being patient rubbish results loose and danger of swallowing so tree away

I'm in my 20s and very recently lost a front tooth from it cracking on some hard food. It has been absolutely devastating, unfortunately it's super hard to get quick dentist appointments and it's £3000 for an implant. I work in a customer facing role and about to graduate so it's essential I have a front tooth not just for confidence but also so I can speak clearly. I was VERY skeptical of this product but thought I'd give it a shot. I'd say it's probably one of the best purchases I've made this year. Firstly, I'd say for actually making the tooth it can be a bit of a fiddle at first. The first tooth i made didn't look very good but fit fantastic, I remade it a few times and flip flopped between it fitting great and looking great so it's something you need practice with. I have settled on the one I've got in the photos because it's better then a massive hole and looks okayish. Id also suggest soaking it in tea for 5 to 10 minutes because it is BRIGHT white if you don't. It's relatively easy to shape and there's enough time to do it before it completely sets. You get some dental tools, the material to make the teeth and a little tub to store your teeth when not using. If you mess up really badly on one you can reuse the material and stick in in hot water again and try again so it's not imperative you get it right the first time. I wore this today at work for about 9 hours and it stayed put, I was lisping a little but less so then having no tooth at all, but ifyou have trouble with it moving I'd suggest a bit of denture glue something i might try myself soon. I think comfort depends on the tooth you're making and how yu make it, mine isn't uncomfortable but felt a little strange at first. Ive only worn it one full day but I've taken it out the eat and drink just incase. This has been a godsend for me, I really reccomend getting this if you're missing teeth In your smile zone and are insecure, can't afford alternatives, or are simply waiting for an implant or denture. I was unsure about this product but as long as you have patience and follow the instructions it'll do wonders for your smile.

Clever, makes a good replacement for a gap. My first tooth was disappointing but I melted it down again and made a second which was better. Only problem is the taste of the plastic is awful and distracting when wearing!

I am happy with the result. Been considering for some temporary measure, whilst my jaw bone healing prior implant installation as been unhappy with how my smile looked like. The product done exactly what I expected. Recommend! Spend a bit of time forming right shape and color, but result well worth it.

Has definitely helped and easy to use.

Though this is temporary, it looks like it may work for a while: it wasn't purchased for myself, so I can't really write a positive review, but hopefully I will!

Not for me

This actually works! I thought well Ill give it a go and if it fails so be it! I devised an upper molar tooth as per the instructions . I went back to my dentist for a cleanup and She said "what's that, where did you get it"> I said while I work on my implant strategy I have this temp solution, you shook have seen here face !!! Get it , it works and you may need Mohave a few goes until you get to right, and you can fie it down with a tools to make it fit well.

Absolute lifesaver. My temporary bridge fell out and I can't afford getting permanents. So I made my own bridge with Temp Tooth, eventhough the product is not sold for that purpose, as you can see from my photos, I brilliantly crafted my own bridge thanks to this product. It helps that I have the 2 stub teeth, but basically I used 14 beads for each tooth. I did one tooth at a time starting with the stub and worked my way across. The key to making a perfect bridge with this product is don't try to shape the tooth perfectly in your mouth, because you're going to do the shaping with a straight razor blade. Just get it to fit and get it the right size. The size and fit is the most important. Once you make the first tooth, put it in the freezer for about 30 seconds. That causes it to expand and solidify. Step 2, put the tooth you just made back in your mouth. If you did it right, it should go on the stub perfectly. Step 3, do the same thing for the other stub. Now you should have two false teeth that fit perfectly over your stubs. Now the fun part: creating the middle tooth and making the bridge. All you have to do is put the 2 false teeth in your mouth and hold them in place with your bottom teeth, then make the middle tooth and shape it between the outer 2 teeth. When you're doing this, make sure the middle one is somewhat hot so that it will stick to the 2 outer teeth. Also, make sure the teeth are in relative proportions to regular teeth. Remember, they don't have to be perfect at this stage, because you're going to make them perfect later with the razor blade. Now, once you got the middle tooth in between the other 2 teeth, pull all three out altogether slowly and make sure they stay together because they will be loosely stuck together. Take a tweezer and grip one end of the bridge with the tweezer. Then, dip the entire bridge in boiling hot water for 2 seconds. This will cause the bridge to stick together more tightly. Take it out, blow it real quick, and then immediately put it back in your mouth so that you don't lose the shape. Use your index and thumb fingers to press the front and back part together to get a tighter grip on your stubs. Also push on the part next to your upper gums to make sure that part is firmly against your gums.Repeat this step of putting the bridge in boiling hot water 1 or 2 times to make sure the entire unit is firmly stuck together. After each time, put it back in your mouth to reshape it. Now, put the whole unit in the freezer for about 30 seconds. This will cause it to solidify and expand. When you take it out, now you have a fully functioning bridge. All you have to do now is shape it to perfection with a razor blade. Just chisel two outer grooves to create the appearance of connecting teeth. And then cut away at the bottom of the bridge to create the appearance of the bottom of each teeth. If you get confused, you can look at a picture online of some teeth to get an idea of how it should look. The most important part of your chiseling is the bite. So if you have an overbite like me, you will need to cut away at the back of the bridge to give your bottom teeth room to chew. You may also want to cut away at the back of the bridge to give your tongue some room and to make it feel natural. If you did everything right, you will notice that the bridge stays in your mouth without falling out. However you will need some fixodent to make it hold all day for talking and chewing. To change the color, I soaked it in Lipton Black Tea for about 6 hours, and it came out perfectly like my other teeth. However, as you can see from my photos, the color will go away once you brush it. Anyway, what a lifesaver. I've talked to people in person and no one ever noticed the difference. This product easily saved me $3,000 that I don't have. Whoever made this product is a GENIUS!!! Thank you.

I bought this product because of all the good reviews. I didn’t use it for quite a while, and it did take a few goes to get it to work. The instructions said to melt the pellets material in very not but not boiling water. I tried this at first but nothing happened. The pellets remained hard and white. So I threw caution to the wind and DID use boiling water, which worked great. Putting the pellets in a small bowl with boiling water quickly caused the material to become clear - as per the instructions - and using a small fork I fished it out and easily moulded a new “tooth”. I did this 3 days in a row while I was waiting for my dentist appointment. On the first 2 days eating caused it to fall out but on the 3rd I ate pasta at a restaurant and it stayed in.

Une solution de secours à ne pas utiliser sur la durée il faut savoir etre assez douée et avoir le coup de main. Pas facile la 1er fois il faut avoir de la patience et la teinte est vraiment blanche...

It took 3 attempts to fashion a tooth which met all requirements, but this is not a drawback. Technique is refined on each occasion. Up to 25 pellets were needed to develop a tooth to fit the particular gap. The tooth clicks into place well, and feels secure. The tooth still feels comfortable after 3 hours of wearing. Removal of the tooth will be interesting; it felt tight on last removal, but further trimming is pending. Matching is not yet perfect (white!), but drinking cups of tea should introduce slight yellowing. Overall, a brilliant product; appearance after fitting is good. The bite is excellent.