Single Monitor Arm Desk Mount Fully Adjustable Monitor Stand for 1 / One Screen up to 32 inch Extra Tall 31.5 inch Pole,Black (MD6821)

Pros: What is there to say? There are pieces of metal machined to fit together. My expectations were extremely low for the price, but I was blown away in amazement. It's rigid enough to hold a monitor beyond its reported weight limit. All the weight is pushing down so moving it side to side is easy. I was concerned at first because the majority of crimping mounts had small clamps overtop. I installed this on a glass desk. Luckily the part in contact with the glass is big enough to spread the weight but not as so attract attention to itself. Included are clips for wire management that I found really useful. Almost Cons: The mount for the monitor itself works amazing. However, I have a curved monitor so part of it doesn't actually make contact with the monitor. Surprisingly, however, it has no effected anything nor does it shake whatsoever. The spacers included does a fairly well job of compensating the curve. If you have a monitor beyond a 24" with a curvature equivalent to the radius of a 1500mm circle, then get the monitor's corresponding mount. If you have a regular monitor, I heavy suggest this mount. Overall, this is a good product for day-to-day use.

The Suptek Single LED LCD Monitor Desk Mount is a high-quality, fully adjustable stand that supports monitors up to 27 inches, offering excellent stability and versatility. Its sturdy construction and easy installation make it a reliable choice, while its full range of motion helps improve ergonomics by reducing neck strain. The mount's space-saving design and built-in cable management system significantly declutter the workspace. However, users should ensure VESA compatibility and may need to spend some time adjusting the tension for optimal stability. Overall, it's a great investment for enhancing desk organization and comfort.

I purchased this stand to mount a 22” monitor on my recording setup as space is limited and I wanted to be able to adjust the position of the monitor. It came with clear instructions and all hardware sorted in separate, numbered bag compartments so it was very easy to assemble. I am impressed with the robust steel construction, and all components are very strong and durable which I was not expecting for the reasonable price. The mounting clamp is excellent and easy to use with multiple adjustments to allow it to fasten to almost any thickness of desktop. The wire routing clips will accept wires of different types and thicknesses and keep the wires organized for a very clean appearance. I have positioned my monitor with the support arm extended about 12” center to center with the upright post which applies considerable leverage to the clamp, so I placed a small rectangular piece of MDF at that point to ensure that the clamp does not leave any indentation in the top of the work surface. Adjustment is easy, but it does require two Allen wrenches which can be misplaced, and I would prefer to have adjustment knobs which would be more convenient. I have a small computer module on the back of my monitor, but the overall size and weight are still in the range specified for this stand. However, I could not get the tilt adjustment to stay in position no matter how much I tightened it, as the tilt assembly has smooth washers between the yoke and the monitor holder which do not generate enough friction for the tilt adjustment to hold its position. To address this, I widened the yoke slightly in my workshop to make room for a toothed washer on either side as shown in the picture. With these washers in place, the tilt assembly works fine and holds the monitor in any position needed. Overall, I like this stand and I think it is very well-made for the price. If the tilt mechanism held fast with no modifications and adjustments did not require Allen wrenches, I would have given it a five-star rating.

I held off buying this because I didn't want the look of another monitor at my living room desk. I can't imagine why I waited to long. It was easy to install and position. The parts are very sturdy. It came with the part to attach to the PC too.. All the right size allen wrenches came with it and there is even a little holder on the stem to keep each one of them handy, though I haven't needed to use them to retighten anything yet. I did have my husband tighten the bolt that holds the screen vertical as it wanted to sag and I couldn't get it tight enough myself. Easy to reposition the stem on my desk and it came with another type of attachment (that I didn't need) as well. There are clips on the arm and stem to hold the wires which is a thoughtful touch for wire management. There are a million ways to position your screen, higher, lower, closer or further back, tilted or not, angled any way you need.

This is the first monitor mount that I have purchased. The price of this mount was my main reason for purchasing this unit. While I didn't really know what to expect as far as quality, features and usability, I can say I couldn't be more pleased with my purchase. The mount is well built and comes with two methods of mounting the arm. It comes with a plate to permanently attach the arm to a surface or vice type attachment for non-permanent mounting. I used the vice attachment for a non-permanent mount. The vice provides a very solid mount that hasn't slipped or moved during my use of the mount. I am using the mount with a 24" monitor. I am not sure of the weight of this monitor, but the mount holds it very well and it stays in what ever position I place it in. I use the mount to place my monitor in front of a CRT monitor when it is not in use. So, the monitor gets moved around quite a bit. Over the several months that I have owned the mount, I have not noticed any weakening of the mount's hinging mechanisms. Like I have previously stated, when I place the monitor in a position, it stays with out slipping or moving. The mount also has very nice cable management built into the unit. In closing, I am very pleased with this mount and would purchase another one if ever I had the need.

The monitor stand is solid, flexible (several degrees of movement - monitor depth/rotation/elevation etc.). The stand was reasonably easy to assemble and the package came with all the tools except for a Philips screwdriver (which every household has, or should...). Like other reviewers mention, it can probably support a little more weight than is mentioned in the specifications, but to be safe, stay within the limits in the specifications. I have a 20 lb AOC monitor that it is currently supporting without any issues. The product is also minimal in design. It does what it needs to do without getting in the way and is elegant enough without being ostentatious and pricey. I was surprised about the value for money you are getting out of this neat product.

I added a small TV to my home office setup and this monitor arm was the solution as I didn’t want to mount it on the wall. It carries the 20 inch TV well. I can adjust the screen’s angle and pan or tilt as needed. It was easy to put together and can be moved as needed with the clamp.

This is perfectly adequate. Sturdy, well made, i have no doubts that it will hold this 27" monitor. My biggest complaint is the size of the handle for the screw. If you have a limited overhang off the back of your desk, and the brace will be all the way under it, the "handle" for the tightening screw is too big and hits the desk making it almost impossible to fully tighten. Make the handle not extend past the edge of the clamp. Super simple fix.