--- product_id: 509880447 title: "extruder" brand: "biqu" price: "€ 81.21" currency: EUR in_stock: true reviews_count: 5 category: "Biqu" url: https://www.desertcart.at/products/509880447-extruder store_origin: AT region: Austria --- # extruder **Brand:** biqu **Price:** € 81.21 **Availability:** ✅ In Stock ## Quick Answers - **What is this?** extruder by biqu - **How much does it cost?** € 81.21 with free shipping - **Is it available?** Yes, in stock and ready to ship - **Where can I buy it?** [www.desertcart.at](https://www.desertcart.at/products/509880447-extruder) ## Best For - biqu enthusiasts ## Why This Product - Trusted biqu brand quality - Free international shipping included - Worldwide delivery with tracking - 15-day hassle-free returns ## Description 1 Review: Absolutely kills it. - To get it out of the way first, yes, as everyone else has mentioned... No instructions. However, if you pay attention when you are removing your old extruder, this is a straightforward process. I have been trying in vain to get a large nozzle (1.0 mm) to work on my ender 3 pro for rapid drafting. The stock extruder laughed in my face and skipped like a record when I tried to print with the 1 mm. I installed this extruder, not really expecting that much of a difference, but I had tried every other suggestion for fixing extruder skipping. Slowed the print down, adjusted up my zed offset, changed stepper motors, checked stepper voltage, all that crap. Long story short, I installed this guy and have run a few tests. I started with a layer height of .6 at a print speed of 30. No problemo. I was surprised. So I jumped it up to the .8, same speed. No issues. I went bananas and jumped it up as far as I could possibly need it to go: 1 mm layer height at 50 mm/s (my usual speed for PETG). I'll note here that I ran it at a 1.1 layer width as well. Holy crap, it ran it no problem. You can watch your spool as the life drains out of it at that height and speed, but it does an amazing job now. Just from the extruder change. Buy it. Buy it now. BTW, you can do a layer height the same as the nozzle, but you need to know how to set your slicer. Most people recommend no more than 75 - 80 percent, and that's perfect if you don't want to muck around too much. Review: No Longer fits Ender v2 - With the latest Ender 3 v2 the motor has changed. The shaft is no longer keyed and the factory feed roller is pressed onto the shaft. As a result the new set screw is too high to catch the shaft. Also you need to get the old pressed roller off before you can even see this issue. The result is that this will NOT work on the newer Ender 3. If you look down at your extruder and the motor shaft does not stick up above the roller gear then this will not work. I always wondered how you connect the finger wheel filament feeders you find on Thingiverse for the Ender 3. Now I know with their latest model none of those will work either. Hmm...I guess I can kind of blame Creality for this but the vendor of this extruder needs to be current as well. If they made the lower part of the gear longer and put the set screw down there then it would work but you still have to get the pressed roller off the motor. Now that sounds all negative and if you have that model I guess it is - however, their customer service is absolutely great. They reached out to me immediately to clarify and resolve the issue. Although in the end it has been turned over to their engineers for a permanent solution, they gave me options and refunded super quick. I will definitely buy from them again. ## Technical Specifications | Specification | Value | |---------------|-------| | ASIN | B08D9CNHVN | | Batteries Required? | No | | Batteries included? | No | | Customer Reviews | 4.2 4.2 out of 5 stars (652) | | Date First Available | 20 July 2020 | | Item Weight | 73 g | | Item model number | WGC000291 | | Package Dimensions | 10.3 x 9.5 x 2.7 cm; 73 g | | Part number | WGC000291 | ## Images ![extruder - Image 1](https://m.media-amazon.com/images/I/71+z2px2J6L.jpg) ![extruder - Image 2](https://m.media-amazon.com/images/I/71oONsO5fwL.jpg) ![extruder - Image 3](https://m.media-amazon.com/images/I/61gh-65WlbL.jpg) ![extruder - Image 4](https://m.media-amazon.com/images/I/617TR4qxOML.jpg) ![extruder - Image 5](https://m.media-amazon.com/images/I/618-n9-+AzL.jpg) ## Questions & Answers **Q: Does this work with newer Ender 3 Pros?** A: Yes...and no. You will not be able to attach the gear to the 42-40 motors that don't have the longer center shaft. These use a 14mm (from the raised part of the motor, the circle) shaft and it is not long enough. It will not work without changing the extruder motor. Also, the input fitting will not clear the Ender 3 Pro Z rod...so if that's critical for your install, I'd look elsewhere. **Q: Does this fit on a Creality-6SE printer?** A: yes fits on mine, but i needed to print off a riser pad for the filament sensor. the one i used is called "Creality CR-6 SE filament sensor mount riser with cable holder for dual gear extruder" on thingiverse. but just a quick note, YOU WILL NEED 25-30 MM M3 screws. i picked up 2 at a hardware store but you can also buy them off here on amazon. **Q: Could this work with the longer lk4 pro 3d printer?** A: Thank you for your inquiry. This dual pneumatic extruder can be used on longer lk4 pro 3d printer. **Q: Is there a a version of this that comes with a motor?** A: There is a version that comes with the extruder completely build the carriage assembly and a new hand but I can't remember who makes it it's literally a plug-and-play ## Customer Reviews ### ⭐⭐⭐⭐⭐ Absolutely kills it. *by D***. on 22 February 2021* To get it out of the way first, yes, as everyone else has mentioned... No instructions. However, if you pay attention when you are removing your old extruder, this is a straightforward process. I have been trying in vain to get a large nozzle (1.0 mm) to work on my ender 3 pro for rapid drafting. The stock extruder laughed in my face and skipped like a record when I tried to print with the 1 mm. I installed this extruder, not really expecting that much of a difference, but I had tried every other suggestion for fixing extruder skipping. Slowed the print down, adjusted up my zed offset, changed stepper motors, checked stepper voltage, all that crap. Long story short, I installed this guy and have run a few tests. I started with a layer height of .6 at a print speed of 30. No problemo. I was surprised. So I jumped it up to the .8, same speed. No issues. I went bananas and jumped it up as far as I could possibly need it to go: 1 mm layer height at 50 mm/s (my usual speed for PETG). I'll note here that I ran it at a 1.1 layer width as well. Holy crap, it ran it no problem. You can watch your spool as the life drains out of it at that height and speed, but it does an amazing job now. Just from the extruder change. Buy it. Buy it now. BTW, you can do a layer height the same as the nozzle, but you need to know how to set your slicer. Most people recommend no more than 75 - 80 percent, and that's perfect if you don't want to muck around too much. ### ⭐⭐⭐⭐⭐ No Longer fits Ender v2 *by B***R on 8 March 2021* With the latest Ender 3 v2 the motor has changed. The shaft is no longer keyed and the factory feed roller is pressed onto the shaft. As a result the new set screw is too high to catch the shaft. Also you need to get the old pressed roller off before you can even see this issue. The result is that this will NOT work on the newer Ender 3. If you look down at your extruder and the motor shaft does not stick up above the roller gear then this will not work. I always wondered how you connect the finger wheel filament feeders you find on Thingiverse for the Ender 3. Now I know with their latest model none of those will work either. Hmm...I guess I can kind of blame Creality for this but the vendor of this extruder needs to be current as well. If they made the lower part of the gear longer and put the set screw down there then it would work but you still have to get the pressed roller off the motor. Now that sounds all negative and if you have that model I guess it is - however, their customer service is absolutely great. They reached out to me immediately to clarify and resolve the issue. Although in the end it has been turned over to their engineers for a permanent solution, they gave me options and refunded super quick. I will definitely buy from them again. ### ⭐⭐⭐⭐ Overall, a great upgrade! Well worth the $$ *by H***. on 29 November 2022* Ordered this for my Ender 3 pro as the teeth were worn and no longer feeding the filament consistently. I have installed similar hardware on other printers, so this one wasn't a big deal, but for someone new to this, the lack of decent instructions may be a bit frustrating. The only other con for me is the inability to add an extruder knob due to the design. Not a deal breaker, but maybe future versions could allow for this. Now for the good: This thing is well built and works like a dream! Anyone that has dealt with the old style single gear extruders know how aggravating feeding new filament can be! Sometimes it seems almost impossible to get it aligned and feeding properly. No such issue with this one. Feeds right through, and no slipping or jumping. I'm also not seeing the filament dust accumulate around the drive gears like in others. Would definitely purchase again! ## Frequently Bought Together - Bigtreetech Upgrade Dual Gear Extruder, Double Gear MK8 Extruder 3D Printer Dual Driver Stock Feeder All Metal 1.75mm Filament Extruder Kit for CR-10S Pro/CR-10/ Ender 3 V2/Ender 3/Ender 3 Pro Series - BIQU Panda Jet Head Cooling Fan Duct for Bambu-Lab P1P/P1S/X1C/X1E 3D Printers Compatible with Stock Hotend Panda Revo/Flow - BIQU Extruder Pulley 36Teeth Bore 5mm Stainless Steel Drive Gear for 1.75mm & 3mm 3D Printer Filament (Pack of 5pcs) --- ## Why Shop on Desertcart? - 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016 - 🌍 **Shop Globally** — Access 737+ million products across 21 categories - 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price - 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members) - 🔒 **Secure Payments** — Trusted payment options with buyer protection - ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews **Shop now:** [https://www.desertcart.at/products/509880447-extruder](https://www.desertcart.at/products/509880447-extruder) --- *Product available on Desertcart Austria* *Store origin: AT* *Last updated: 2026-06-03*