NEIKO 02448A 1/2" Drive Master Impact Socket Set, 65 Piece, Standard SAE (3/8"-1-1/4") & Metric (10-24 mm) Sizes, Deep & Shallow Kit, Includes Adapters & Ratchet Handle

Whereas some low-to-mid-range-priced products marketed as "impact sockets" clearly don't deserve the designation, I trust these to take a real beating without issue. The weight is certainly there to tell the story, not to mention the beautiful phosphate finish with both printed and etched (and very readable!) markings. I expected the sockets to be good going in. What I did not count on was wanting to actually use the wrench it came with, but whaddya know? It's REALLY nice! It's not long, not slim, doesn't have a flex head, doesn't have a soft grip, only 72 teeth...nothing special, in other words. At the same time, it's every bit as tough as the sockets, and the ratcheting action on it is smooth as butter. The switch is recessed - appreciated if you've ever used one where it wasn't - but the release button is large and sticks out a bit - also appreciated. This wrench and extensions/adapters are a real bonus, as the price would be great for the sockets alone. The set falls short in only two places. The first, as many have previously noted, is the case. It's certainly not the worst I've seen, but you've got 35 pounds of tool that calls for a case up to the task. This one allows sockets to rattle out of place as the top lid isn't held tightly to the bottom half, and there's no way the side fasteners are going to hold forever either. Why is it so hard to find a well-designed case with a socket set? The ones where sockets go in vertically hold, but then you can't read them. I mean, they don't even have to make the case with more expensive materials. Just design them better, holding the top down tighter so they can't move. I will say this: At least they put everything on one side. The cases that hold tools in both halves of the case are almost always a catastrophe. The other negative is Neiko's poor warranty, which, for most of their products, is a mere 30 days. Fair enough, I guess. You're gonna make sure you have all your pieces and get a replacement up front if necessary. After that, these are sure to hold up well to average use for a long time. Of course, if you turn wrenches for a living, that probably won't work for you. You use a tool frequently enough and long enough, and you'll probably run into something or another. But if you're a professional, you're spending a good deal more to get a bump in quality and the top-notch warranty that comes with it. As for me, I'm just a guy in his garage making as many problems as he's fixing. And for someone like me, these are ideal: Not the best in the world but good enough to get the job done many, many, many times down the line.

Awesome set for the money.

Bought these 6 years ago. They have held up very well over the years and was my first socket set. Can’t recommend it enough. Get the full set!!! The case deteriorated over the years but that’s expected.

They work great!

I recently purchased the NEIKO 02448A 65-piece 1/2” drive impact socket set and I’m genuinely impressed with how well it performs. The sockets feel solid and durable, with clear markings that make size selection quick, all neatly organized in a sturdy blow-molded case. They’ve held up perfectly through several projects involving stubborn bolts and nuts, delivering reliable torque without any signs of wear, stripping, or cracking. The 6-point design grips fasteners securely, reducing the risk of rounding them off. Whether you’re a professional mechanic or a weekend DIYer, this set serves its purpose exceptionally well. It covers almost everything I need in one convenient package, saving me time and hassle. Great value for the quality—highly recommended! Would buy again.

Been using this product for over 2 years now and I would highly recommend this product. Its durable, never had a socket fail/crack using my impact driver. Easy to stow away in a car or truck and have on hand whenever the occasion is needed. I do like the case but I do not LOVE the design. The plastic tabs holding it closed pop off and I typically have to pop them back on. The side latches that are plastic and physically part of the case, dont hold perfect on one side but all in all. It will keep the case closed. I'd like a TOP and BOTTOM placement on the case for people like me that get excited and try to open tools and spill them everywhere 😅 All in all good product and the case shouldn't be a make or break for you if thats something you're oddly on the fence about.

Stays in case. Sockets seem well built.

These sockets are well-made CR-V steel. While some criticize CR-V for being more brittle, it allows a thinner socket while being harder than CR-MO. Both materials have their advantages, but these sockets are quite good and not too thick around the edges. For the average consumer or even mechanic, these are more than enough and much safer than using non-impact CR-V sockets on an impact wrench. Are there downsides? Yes. The case is downright awful. When the set arrived the sockets were strewn all around the case and I had to organize them by hand. They simply don't stay put. If you want to make these sockets mobile, you'll need to rehome them to a different case or some socket organizers. Other than that, they are laser etched, which can be considered an upside or downside. There is no compromise to the material, but the etching can wear out over time or become covered in grime. It's a pick your poison kinda thing. Overall I'm glad to have this kit. I like that it includes a decent ratchet as well, since my Dewalt socket set skips a few rarely used sizes like 20mm that this kit does include (no size skips, I appreciate that!). Great value for the money, and recommended to anybody looking for some quality sockets for light to medium duty work.

مفتاح الاوتوماتيك يوجد فيه مشكله أنه خشن ولاكن تم حلها فتحته وتم وضع شحم استخدمت مفتاح T9 T10 وتم معالجة المشكله

Tengo el de 3/8 y este de 1/2. Los dos son un buen conjunto de herramientas no conozco otra marca que se le compare con respecto a la resistencia. Son dos puntos negativos (ni tanto)el primero es que los dados de 1/2 (10, 11, 12 mm) son muy robusto (se entiende por la entrada de 1/2) para espacios pequeños. Quería vender el de 3/8 pero lo pensaré dos veces pues estos (3/8) dados son más compactos para espacios más pequeños. El segundo es que este paquete (1/2) no trae lo dados de 8 y 9mm. No son los más usados pero no los más abandonados. En general todo excelente si tienes el de 3/8 querrás el de (1/2).

Lo e probado durante 2 años y resiste bien, viene muy completo

Utilisation 40 heures semaines depuis 1 ans et demi. La seule chose qui a brisé est le joint.

Bought this set for my service truck and use them with a snap-on impact daily. Case it build strong and had been holding up great. Bounces around in my truck cabinets all day long and no issues