Laser 5540 Tyre Valve Tool Set 3pc

Once everything was prepared it only took a couple of minutes to remove the old valve stem and install the new valve stem. You should mark the hooked removal tool handle indicating the direction of the hook. All three included tools are very sturdy. After hooking the valve stem I insialled the screw tool, using both tools to pull the valve stem out. I lubricated the inside of the tapered tube and the new valve stem easily went in. They dont no how t0 spel tire. ;)

Love this tool. Change valve stem on tire

Much easier than dismounting the tire.

The tools are sturdy made and worked as described. The only reason for the 4 rating was the reducing tube was too thick to seat on my aluminum rim slot --- so I couldn't push the tube close enough to the rim to allow the valve to push through. What I had to do was make an extension end with a slightly thinner plastic so that I was flush up against the rim. It is very important to be flush up to the rim when pushing the valve through the reducing tube. With my short extension on the end I was able to me it slide right in. Never saw this done before --- pretty slick!

worked well would reorder.

It may be my expectation. There are two different size valve stems, most commonly 0.453". The hook for removing the old stem worked well, but the "cone" used for literally ramming the new stem in was too large to fit the hole in the rim. I used 3 or 4 different lubricants and the stem would not go through the cone whether it was in place on the rim or in my vise. I hammered, beat, tried some humor to relax the stem but nothing worked. I ended up breaking the bead and inserting the valve from the inside of the rim. I used to work in a tire shop and have worked with similar products before. I still have the tool and may try it again when the need arises.

This set is HD. The stainless-steel Tee is all welded. The Screwdriver valve puller handle is rubber. The white tube is1/8" HD thick. Every DIY handy man needs this set eventually. Why? Because low quality, Chinese made rubber valve stems dry rot causing air leaks after a few years. For the price of having a tire shop exchange 1 valve stem this quality set will pay for itself. Plus, the tire bead doesn't have to be broke, potentially damaging the tire.

I was looking for a way to replace valve stems without having to drive into town to the tire store. Trying to break the bead just for a cracked and leaking valve stem is a real pain to deal with. I stumbled into a few videos on YouTube about this type of tool. Did some research chose this one to try. I did two stems, one on a trailer tire and one on my pickup spare. It took 10 minutes each. The trick is to use good lube removing the old stems and good lube installing the new stems. And take your time and use new stems, not some you might have laying around that look good. I consider this a must have tool kit.

Conforme à la description, semble de bonne qualité. Fonctionne parfaitement, et très simple pour enlever (ou mettre) une valve !!! très satisfait de mon achat.

Un outil merveilleux tout à fonctionner comme prévu un gros 5 minutes Un vrai charme

Parfait.

Verkar bra, har ej använt den ännu.

Para llantas de aluminio no sirve tube que rebajar el cono luego funcionó perfectamente