231C

****Update 1/2/2013**** I have used this impact gun a great deal since my last review, and this gun is still holding strong. I recommend you purchase the IR air tool oil. I did buy the protective boot for my gun, its red and takes regular abuse (gun occassionally gets tossed to the side un-intentionally while I'm working) and my impact gun is still looking great! I use this gun for A LOT of different things, most recently: Busting off the bed nuts on my GMC project truck (nuts were rusted), leaf spring removal, front suspension A-Arms, Honda suspension rebuild: McPherson strut removal, sway bar, hub-bearing removal and install (this was so sweet, i bought the bearing kit on Amazon as well), I can go on and on. You wont be disappointed with this gun, for the price and performance, you cannot beat it. Note: I grew up fixing cars with my dad, so a word of advice from someone who has been doing this a while: Don't skimp and use your regular sockets with ANY impact gun. Spend the money on real impact sockets and use impact grade U-joints and extensions. Regular sockets WILL crack because of their thin-wall design and are simply not up to the task of taking abuse from an impact gun. You cannot put a price on your safety, and ER visits because a shard of shattered socket flew in there should not be in your plans. I still stick with my opinion that if you choose an impact gun, make sure it is serviceable (can be opened up and you can purchase a rebuild kit for it) this alone will ensure your gun will be around for years and years to come. A lot of the other guns i shopped for were of a sealed/riveted design, and wont allow servicing should you need it. ****I highly recommend this gun to others.**** Gentlemen, I recently purchased this impact gun, which would be my first. I must say that i love the power. I use it for tire rotation, brake jobs, crank pulley bolt removal, etc. The torque is great; I can't even turn lug nuts any further than this tool can by hand. The power selector knob is great for varying power to the socket. I bought the IR 14pc socket set (metric), which by the way, are beautiful! too bad the finish gets messed up as you use them. I chose this gun over a Craftsman impact, the particular one could not be rebuilt with a kit like this one can. Beutiful aluminum finish on the body, I think I will buy a protective boot for it.

I've had a cheap Husky impact for quite some time. It wasn't overly powerful so I was looking for something a bit better. I received an IR 2130 as a gift and was really looking forward to using it. I have borrowed a neighbor's old IR 231 several times for jobs my Husky just couldn't handle. So, I knew I wanted an IR impact. After trying out the 2130 on some lug nuts, it removed them with my large compressor but didn't knock them out near as quickly or easily as I was expecting. When trying to use the 2130 on my smaller compressor it wouldn't even touch the lug nuts. So, having used a 231c in the past, I thought I would pick up a 231c to compare to the 2130. The 231c was able to fairly easily take off lug nuts on my F150 (150ft-lbs) even on a small portable compressor with a 1/4" line going to it. When hooked up to my big compressor with a 3/8" line it rips them right off effortlessly. This impact is heavy, loud and hits HARD! Compared to the 2130 it's much louder, slightly less ergonomic and seems to hit harder. But, I'm a weekend wrencher and enthusiast. I think the 2130 needs more air to really shine. If I was using it daily in an automotive environment I might lean towards the 2130 for most jobs and an Aircat for those really stubborn bolts. But, for what I use it for, the 231C will do the job well and if it's half as well-built as the old USA made ones will likely last me a lifetime. Pros: Works quite well even on a limited air supply With a good air supply really hits hard (Much better than my cheap husky and in my opinion better than the 2130) Well built, feels like a tank, parts readily available There's a reason they've made this same impact for 20+ years! Cons: It's loud compared to other newer designs Trigger seems to work well but the plastic feels cheap to me Made in China (although it doesn't appear the the quality is any different than the older USA built impacts) I did a lot of reasearch and looked at a lot of reviews. Ultimately I'm happy I went with the 231c. The 2130 is a good wrench but not what I was looking for. Hopefully this review helps someone decide which impact to buy!

Works great i had my first IR231 since 1990 the trigger has failed bought this one should last for many more years at home

I have wasted untold hours trying to get a usable impact wrench from Lowes, Home Depot and Harbor Freight. I have spent up to 150 dollars on pieces of junk that won't take off a lug nut torqued to 80 foot lbs and some were even defective out of the box. Well I finally checked Amazon and here is an Ingersoll-Rand for the price I have been paying for store brand garbage. Yeah its Chinese made but so is any impact wrench under 250 dollars. The difference here is it's well made and works. Chinese doesn't always mean junk, all your Apple products including the MacBook I'm typing this on are made in China. The difference is design and quality control and this Ingersoll-Rand product has it. It is simply better made and better performing than any of the cheap store brand models I tried in this price range. So out of the box I just screwed on an air fitting, put two drops of air tool oil in the gun and walked right out and took the lug nuts off my wife's car without having to break them first by hand like I did with all the other wrenches. Just two pounds of the wrenches hammer with it on a middle setting and off they came. Put the wheel back on with the wrench setting on 0 then work up to the 2 setting where the lugs were just shy of 80 ft-lbs which is where I usually finish them off with a torque wrench by hand. This was on a 15 gallon compressor set at 90 lbs. Be careful with the settings going on - this wrench felt like it was hardly working set on two and it got up to 75-80 ft-lbs. I can't imagine where the torque would have been at the highest setting. So to sum it up a great product at a great price!

Top air gun and would recommend to any technicians.its more powerful than Mac and snap on air guns my fellow technicians have got.you can count on Interpol rand.

I purchased this gun over 4 years ago when I started as a auto mechanic and after 4 years there is no air tool I could recommend other than this gun .there was very few time this was not enough to remove nuts and even the other guys with 600$ guns would not work. This gun is one of the best bang for your buck in the industry. After 4 years of daily use this gun has never skipped a beat. Would highly recommend to anyone getting into automotive trade.

Use only 2 days and stop working.

هو بيكون بدون ملحقات ولكن بصراحة أفضل بكثير من اللى بيجي ومعاه ملحقات وفي النهاية تلاقي الاداء تعبانه انما ده يستاهل ثمنه بعد تجربه سنتين يستاهل والحمدلله

Como siempre está marca no te defrauda, excelente calidad, muy potente.