HD4567 Rear Lens ND 4 Filter Kit for Sigma 14-24mm F/2.8 DG DN Art & 14mm f/1.4 DG DN Art Lens Sony E Leica L

Firstly and currently there isn’t to my knowledge another system out there for the Sony 14mm f1.8 GM for rear lens filters so 5 Stars are happily awarded. The Filters come in a proper mini case that won’t be a problem for any camera bag. Removing and fitting the included filter holder to the rear of the lens is easy. Warning here: Do not over tighten the 2 screws as this can easily be done. The only issue I have with this product is the little rotating lever keeping the filter in place. When screwed in (as it arrived) it’s too low and doesn’t go over the filter. Easily resolved by loosening off but when you’re not using filters, my concern is the lever could drop down thus coming into shot. I think I will install a very small nylon washer. I’ve seen a couple of posts online with questions of light leaks, I’m happy to report there are none but I’ve only been working with 2 second exposures. Holding the filters at the edges for installation is easy. I use these for TimeLapse, Video and Landscape Photography and am very happy with the results. I’m not aware of colour cast. I went with this option instead of front mounted filters as, space, weight, money and the affects that wind and rain have during exposures. Hope this helps, give them a go, I don’t think you’ll be disappointed.

Perfect add in for a sigma wide angle. I have the 14-24 and this will allow me to now blur water etc. Note I will not use this for any landscapes as why put a plastic filter in front of a nice piece of glass

Easy to use and travel with.

I’m giving 3 stars because I didn’t get to see images. The first one got sent back because the screwdriver wouldn’t connect with the screws. The second one worked great into getting the screws. Now removing the original piece with this one is a risk and can cause damage. If at all you can’t turn the lens onto the camera body, it’s because the filter didn’t set in right even though everything is in place Screws. I tried to connect the lens and turned with more force and it went on, but with damage to my connector pins. I sent it back, and my camera went to the repair shop. Now for a few hundred dollars more lol the m15 is a front filter holder that works great.

I had read reviews about this, I bought the Sony lens in large part because this product existed, but the product is a huge disappointment. - The installation process is not easy. I wasn't necessarily expecting it to be but it's gut wrenching to be pulling hard at the gel holder in a $3000 lens in order to remove it. It does not come easily. Be careful with the screws, you need to do this close to a large non slippery surface, like on top of a clear bed sheet so that if the screws fall, you'll be able to find them. - The lens has several blemishes, look at the picture. I thought they were dust, but they don't come off. - The worst part of the whole thing is that the filter lever does not slide over the filter (see picture, that's as far to the right as it will go). I pushed hard and it wouldn't slide over the filter. I don't want to push even harder and risk chipping the filter and having small particles fall on top of the lens. I'm also afraid of leaving it like this and risking the filter falling on the sensor. Update 1: Increasing to 3 stars. The seller has been super responsive. - The "blemishes" came off with a lens cleaning wipe. All good on this front. - The seller has sent another holder to replace the one that I have. I'll try that out and update. Update 2 Increasing to 4 starts. The seller sent another holder. That one worked as expected.

Genial, muy versátil!!

READ THIS - I will save you time and tons of frustration: 1) the screwdriver that came with mine did NOT work, I have #00 Philips head precision screwdriver that works perfectly so get one of those beforehand, 2) once you remove the three screws as outlined in the video, to remove the original plastic on the lens, make sure you have the lens at 24mm so the glass is out of the way, then stick your thumb underneath the side OPPOSITE the electronic contacts and push up (out) - you don't need to push very hard so if it feels like it is bending, move your thumb slightly left/right until you feel it give, 3) THERE ARE two parts to remove, the main part and then there will still be plastic attached closest to the electronic contacts, you need to remove that, 4) YOU MUST REMOVE the black screws that were already installed in the Haida adapter BEFORE you attempt to put it in your lens, 5) use the original screws to screw the Haida adapter in place (I'm not sure why they included the black screws already pre-installed but I just kept them in case I sell the lens later). Hope this is helpful!

It took so long to receive product and my expectation was to shot this weekend using the filter; however, as you can see on the pictures, the adapter that came with the filters did not matched the original screens holes. No idea if the seller could fix the problem. Second review after the customer service contact me. We figure out together the kit sold was not the one that suppose to work for my lens. I would advise to double check before you purchase to avoid all the stress and waste of time that I have. In my last research it seems they have at least 3 different kind of kits and all of them are pretty much similar, the difference is just the position where the screws will fit. Anyway, I appreciated the company customer service that was really understandable and helpful to ship the other missed part fast.

Dopo esser finalmente passato dal Sony 16-35 f4 al fantastico Sigma 14-24 F2,8, ho dovuto pensare a come sostituire i filtri che fino ad ora avevo utilizzato sul 16-35. Con il Sigma 14-24 è molto più difficile utilizzare filtri di ogni tipo, bisognerebbe acquistare un costosissimo Holder, delle costosissime lastre di dimensioni abnormi difficilissime da trasportare. In questo ci viene incontro Haida, perlomeno per quanto riguarda i filtri Neutral Density. Scordiamoci quindi i filtri ND a densità variabile ed anche il polarizzatore circolare. L'idea è intelligente e consiste nell'inserire i filtri nella parte posteriore dell'ottica, in modo da non essere obbligati ad utilizzare holder e filtri delle dimensioni di una finestra. Tutto questo ha dei pro, ma ha anche dei contro. COME SI PRESENTA Questo kit di filtri ND si presenta molto bene, protetti in un box di plastica davvero compatto nel quale sono infilati tutti e 4 i filtri in una spugna poliuretanica che li tengono fermi e ne proteggono l'integrità. Le dimensioni sono sicuramente un vantaggio: portarsi nello zaino un box cosi piccolo è sicuramente meglio di portarsi un mega kit di filtri da 100x150 + holder. QUALITA Ho fatto qualche prova ed i risultati sono eccellenti. Partiamo certo da una qualità enorme sfornata dal sigma 14-24 art quindi non mi preoccuperei molto per questo. C'è sicuramente un piccolo calo, ma nulla di particolare. Se volete approfondire, cercate la recensione sul tubodi Dustin Abbot in cui faceva qualche test. DA TENERE IN CONSIDERAZIONE bisogna però essere coscienti delle problematiche di questo tipo di filtri, perchè per quanto siano comodi da trasportare, non lo sono altrettanto da utilizzare sul campo. Pensateci: siete sul posto a fare foto, e per montare questo filtro dovete smontare l'ottica dalla fotocamera, aggiungerlo nella parte posteriore ( bisogna dire che si monta comunque molto facilmente) e rimontare il tutto. Non proprio l'ideale per la pulizia del sensore della fotocamera, specialmente se siamo in un luogo ventoso e magari anche sabbioso. Saremo costretti a smontare la fotocamera e fare il cambio cercando di ripararci nello zaino. Sicuramente sarà consigliabile portarsi dietro un panno per togliere le ditate ed una pompetta per la polvere. Nel Sigma 14-24 per sony è presente una levetta che blocca questi filtri, mentre nei 14-24 per nikon non è presente, ma nella versione di questi filtri dedicata al Sigma per sony è presente un adattatore, quindi sospetto che i filtri siano gli stessi con l'aggiunta dell'adattatore per la verisone Sigma per Sony. PRO E CONTRO: PRO: -Compatto, leggero e facilmente trasportabile. -relativamente economico -ottima qualità CONTRO: -Poco pratici: per montarli o sostituirli bisogna togliere la lente con il rischio di far entrare polvere nel sensore e sporcare con ditate i filtri Concludendo, se cercate dei filtri ND per il sigma quasi sicuramente non avrete scelta, al momento in cui scrivo sembra siano presenti solo questi Haida. Il risultato comunque è buono ed i prodotto è di ottima qualità. Non costa un occhio della testa e ci permette di portarlo facilmente con noi. Consigliarvelo è un pò inutile visto che di scelte non ce ne sono molte... posso dire però che sarà un buon acquisto con il quale potrete scattare foto di ottima qualità!

The order was delivered quickly, considering where it came from. There are no complaints about the quality.

Il y a une erreur de référencement, la bague n'est pas compatible avec le sony 14gm comme indiqué dans le descriptif, je l'ai installée et c'est mettant la dernière vis que j'ai coompris qu'il y avait un problème. J'ai abimé la bague et je l'ai renvoyée, on verra bien pour le remboursement.... Ill y a une autre référence adaptée pour le sony 14mm, je l'ai vu après.

These filters work perfectly for my sigma 14-24mm lens. They let me capture long exposure waterfalls in bright daytime without any distortion or discolouration. Highly recommend to anyone looking for a good set of behind lens ND filters. The small carrying box is also a nice touch

Der beiliege Schraubenzieher passt nicht, wie beschrieben, um die Schrauben am Adapterring zu lösen oder die beigefügten Schrauben festzuschrauben. Er passt höchstens in die eine Schraube beim Fixierhebel, für den man aber keinen Schraubenzieher benötigt. Ohne extra Werkzeug kann ich den Filterring nun also nicht montieren