Dupli-Color Vinyl & Fabric Spray, Flat, Black, 11 oz

It took me a while to commit to trying this paint. I love my old swivel chairs...they’ve always been a great style & conversation piece to my room...but with chihuahuas on the arms and sun in the room for 8 years (plus the 20-30 years prior to my owning them) well...the royal purple of them became more the color of grape Big League Chew after you’ve had it in your mouth for an hour (who can do that, even?) anyway...I don’t have the money to get them reupholstered they way I want to...with covid, no one is coming to the house to do it and shipping them would be insane...but I’m OCD and the arms and color were killing me. So...I researched the heck out of ANY paint or covering I could use on my cushions. The link that won me over was a fella’ that used it to redo the black velvet seats in his classic car. I figured...well, if it worked well for him, I would give it a go on my “classic” chairs. I read his tutorial and a few others, and all the reviews here. Everyone IS correct: it doesn’t leave softer material soft. Now, I REALLY covered the crap out of mine. I had a “waffle” 70s fabric on these chairs - basically, the surface was like a Triscut cracker. So, I sprayed it in one direction, waited a few mins “combed” it with a high end leather brush, then sprayed in the opposite direction, waited a few mins, then “combed” it again. THEN I used a “round brush” I used to use for my hair - a medium sized one. Scratchy bristles. The kind of brush you can use to get fuzz and lint off of surfaces (yes! It works! It will also brush your wool blankets soft, too!). I did this to “soften” the paint, so it didn’t pool in the divots of the fabric. I did use a LOT of it the first time...like a can for one side of the cushion. I used less on the second cushion...with the caveat by that time I HAD to use enough to make the cushions match. I let them dry overnight - and then did a final spray and let that dry during the day in the sun a bit. I’ve never seen it come off on my hands or clothing. I’ve vacuumed it and it doesn’t crack. There is no “dust” that comes off it - that I can see. I can STILL run a brush over it to get lint off, without any harm coming to it, and no loss of color. Yes, it IS a little hard to the touch, but honestly, the chairs are for looking, not sitting generally...except for the dogs, and the dogs actually don’t seem to be ruining the paint either - they’ve “nested” in them - to my shock and surprise!!!!!! - but nothing happened. They’re still happy to sit there and, when I’ve completed the project, I’m sure I’ll sit on them, too (I’m painting the entire chair, but trying to reupholster the arms with Turkish rug material, as opposed to reupholstering all of it). I will try to post again when the entire chair is done, but the cushions turned out great so far, so I am posting in case anyone was wondering if this would work for something INDOOR. Again, would I want to paint my couch with it...that I sit on everyday...probably not. But, for a weird old fabric that was wool-based anyhow and that needed a POP of color in an affordable and DOABLE way (I’m adventurous with projects but...have to be confident I can do them without ruining something before I go for it), well...it was 100% what I was looking for. I ordered 6 more cans of it (I think I have 10?) to do the rest of the chairs. It’ll be a project that cost me less than $100. I think if I can get the entire chair looking as good as the cushions, it’ll be well worth it for the “wow factor” of the before and after. And really, this burgundy color is quite beautiful. Give it a try! ^_^

I bought this paint to restore the faded black cushions on my outdoor bed swing after years of Tennessee sun had turned them almost gray in the areas that received the most exposure. Overall, I am very pleased with the results. A few tips for anyone considering this project: plan on multiple light coats. It took four coats to get good, even coverage. Don't try to rush it by spraying heavily. Apply a coat, let it dry, and then apply the next. Otherwise, the paint just seems to soak into the fabric instead of building coverage. Think of it as layering the color rather than painting it all at once. Also, shake the cans thoroughly before starting and again periodically throughout the project. I stopped halfway through each can to give it another good shake. For my project, I used four cans total to apply four coats to the fronts and sides of the cushions. When finished, the fabric did have a somewhat stiff feel. To soften it up, I used a medium-stiff broom and brushed the fabric back and forth. That seemed to help quite a bit without affecting the color. I've used this product before on automotive carpet with good results and no rubbing off, so I'm hopeful it will hold up equally well outdoors. Time will tell, but so far it has made a dramatic improvement and saved me from replacing expensive cushions. I'll update my review if I run into any durability issues, but at this point I would definitely recommend it.

I give this a five-star give it a 10-stop at 10 Stars up there this stuff is really great it really applies awesomely it dries as quick as it as it's applied I was able to spray one part of the seat cover and then when I went to do the second one the the first one was already dry my seat covers will like about a year old and from the Sun I didn't put up the sunscreen on the windshield and they all faded it was a beautiful red color and turn pink but after using this spray it's right back to where it was it looks great and I'm going to put the the cover up from now on but I recommend this highly if you don't need to try it you'll love it it was worth the money

So it’s not the color I was expecting from the lid/top but it’s still a nice gray color(I was wanting darker). Using the adhesion promoter it worked very well. The can says to shake for 10 seconds after every minute of use,don’t miss this step or continue to shake can as you’re working or you will get splatter. Trying to install one of the pieces afterwards it did rub off on the corners and I put 3 coats on. Overall it’s a very nice paint that works well,not sure it will hold up with 3 coats since the first 2 are pretty thin,maybe do 4 or 5. I’m happy with how it turned out just wanted darker but not black.

I spilled bleach on black truck carpeting--the color tuned bleached tan. This worked perfectly! One cannot even tell it was bleached-out! So easy to use just vacuum, spray--wait a bit and brush the nap in opposite dirction and spray where dye missed and repeat--I did about four different directions brushing nap and then feathered it out--truly looks perfect. You need to brush the nap shortly after spraying so the paint/dye does not clump the nap/fibers Next, I will try them on the grundgy floors after I wash them. Great for carpet--have not tried on vinyl.

Ordered this for gas mask components (valve caps, covers, outsert rings etcetera), so far it's working great! Can didn't become a grenade like others had issues with but it can still be possible if others had issues. Tried to spray a full GP5 and unsurprisingly the paint didn't stick at all, but for a chemical hood it did actually surprisingly really good. Dried within maybe 25 minutes. Even with all of this, I feel like what makes my specific product I recieved as bad as it was, is that every here or there it would spray another colour. For example on a couple parts it sprayed out a pink, and on the cardboard I used there were purple blots and marks. I didn't experience others' issues but I did have that personally. Otherwise I think any issues I had were mostly because I've never used spraypaint before! (Ignore the giant white running blob on my black mask, it was intentional!)

This stuff is awesome. Worked so good. Love it.

This product absolutely coverts old, tired carpet and vinyl into new. Easy to use and very good quality.

Buen producto

Good product and a good price. Thanks.

I've tried a bunch of different options over the years restoring (black) motorcycle plastic parts. AutoGlym rubber restorer (liquid spray) works well when the plastic is newer (less than 10 years) and not sun faded or damaged. When the plastic parts are damaged or completely sun faded, this stuff works wonders, with a near-OEM, like-new finish. Since it's meant for fabric, the adhesion is incredible and the plastic can flex without worrying about the paint flaking off. It has very good wear and abrasion characteristics too. It's now my go-to product for doing this sort of repair & restoration.

This stuff worked really good I would recommend it, the out come looked great.

Not as good as Rubberized Material for Outdoor purposes!