UNBREAKcable Screen Protector for iPhone SE 2022/SE 2020/8/7/6/6s [3 Pack] with Installation Frame, 9H Hardness Tempered Glass Screen Protector - [Bubble Free, Anti-Scratch] - 4.7 Inch

Only recently just retired my Iphone11 pro max, and it still has this screen protector on it. Unscratched, not bubbled, fit is solid with no lifting. Looks perfect, still to this day after almost 7years and I have never had to replace it! Maybe because of how easy it was to apply it, the fitting is practically perfectly and lines up with the phones screen dimensions

The UNBREAKcable Screen Protector for iPhone 15 is a fantastic product that offers excellent protection without compromising screen clarity or touch sensitivity. The pack of three is great value, allowing me to replace the protector if needed without hassle. Application was straightforward thanks to the helpful alignment tools and clear instructions, resulting in a perfect bubble-free fit. The protector feels sturdy and has held up well against everyday bumps and scratches, giving me peace of mind for my expensive phone. I also noticed no interference with the phone’s face recognition or screen responsiveness. Overall, it’s a reliable and durable screen protector that I highly recommend for anyone looking to safeguard their iPhone 15 screen effectively.

First off, the claim these are easy to fit isn't entirely warranted, but if you screw up, the company does offer really fantastic support - so I believe these are well worth a go if you want a screen protector. Once fitted correctly, they offer fantastic protection, and you don't even notice they are fitted - image quality or touch performance. The first go, I followed the instructions to the letter. Cleaning, dust magnet etc. and try as I might, one edge of the screen would not stay down, producing a bubble about 2.5cm long. So I decided that I had another to go at, and peeled it off. Attempt two with the 2nd protector, I had a tiny spec of dust get under the screen which produced a very noticeable bubble, so I super carefully peeled it off, as per the instructions, to get at the dust with one of the small dust magnates they provide. These screens just don't peel one on. It made a total mess on the corner I used to remove it - I couldn't have been more careful. So I got in touch via their warranty scheme, and they were great! They sent a complete new package out, with 2 new screens. I was super careful to avoid dust, and degreased the screen with the supplied cleaner to within an inch of its life, but I still got a few bubbles. I could see they were not dust related (you can when it is - experience), so I used the supplied cloth to put an un-godly amount of pressure on to move the bubble out towards the edge. I got a real sweat on, genuinely! But it worked. The result is amazing. The included alignment device works great, and screen looks the same (save for the edge of the protector, which is visible) and FaceID works just as it did before, so does touch operation. My wife and I have the same phone... so I put the 2nd one on my screen. I had a similar issue to the first time I tried, one corner just kept lifting, and producing a bubble. So again, I applied a sweat-inducing amount of force over a few minutes and it finally sat flat. We are both a few weeks in, with our PERFECT, bubble free screen protection, and both glad we did it. So follow the instructions and - clean your phone religiously. Use the wipe, and really rub it everywhere. then do it again! And again, right to and especially on the edges. Next, use the dust magnet - a lot. If your room is dusty, forget it. Go somewhere as clean as you can. Use the alignment tool, then rub from the centre out and if you get a patch where the gel doesn't adhere, press as hard as you can and work it to the edges. Press really hard. Keep doing it - it took over five minutes on my phone, maybe longer. DISCLAIMER: don't press that hard if you're The Rock/Dwayne Johnson. If you break your phone, it's your fault. Use your common sense! So, my initial disappointment was lifted by the UNBREAKcable guarantee - they live up to their service claims. Secondly, while it does take more work than advertised, when you get it right the results are awesome. One additional comment is that like many 'premium' products these days, nearly all the packaging is the plastic coated stuff that feels nice but renders the cardboard un-recycleable. Please manufacturers, stop using that stuff!! Especially for online orders.

Fantastic screen protectors - I’ve been using them for years and never broken a phone screen yet - despite a fair few drops, knocks and crushes. Easy to apply with the provided frame to align the glass protector to the phone, and they also give all the wipes and dust stickers you’d need. Once it’s on your phone the glass protector is nicely secure and I’ve never had one slide or peel off prematurely. Under your fingers they’re just the right balance between smoothness and resistance to allow effortless yet pleasantly tactile taps, swipes and pinches. Unless you looked around the edges you can’t visibly see the protector itself, and any dirt or smudges are very easy to wipe off to get it back to a clean, flawless, totally transparent layer above the screen. If the worst does happen and your screen takes an critical impact, the glass protectors effectively absorb the energy and break as designed, with the pieces staying together on the adhesive layer until you’re ready to remove it and apply a fresh one. This is a pretty rare occurrence though, as these protectors are very tough.

Very good product which is easy to fit and worth the cost.

Great quality screen protector, looks good once installed, comes with a plastic frame which fits around the edge of the phone and makes it REALLY easy to get the protector exactly aligned. I have alwas fitted screen protectors to all my phones and this was BY FAR the easiest to install, thanks to the alignment frame - a really simple idea which I have never seen before! Usually I have got the alignment slightly wrong, then tried to correct it by lifting and re-fitting, but that is exactly when you get dust or fingerprints on the screen, which looks awful. The protector is slightly smaller than others I have used before, probavbly to make it compatible with more phone cases, so there is a slight gap around the edge, but this looks OK when the protector is aligned properly UPDATE: IT DEFINITELY SAVED MY SCREEN!! I managed to drop my phone screen down onto some large, sharp stones yesterday - not surprisingly the protector broke, but the actual phone screen was fine underneath, phew! Have now fitted the second one and just about the order a spare set

(Review for both UNBREAKcable Tempered Glass screen cover and, the curiously separately sold phone body cover). Decent enough quality, but I have two issues with this product: 1. Why on Earth would anyone sell these things apart, when you need both to fully protect your phone? 2. Why are they so expensive? I might have answered Question 2 by writing it, there's probably more money to be made for selling two things separately than one whole - two profit paychecks! Not great. Barring that, the products are actually of good quality and while that just doesn't quite justify the relatively hefty price tag, you can see why they are a little dearer. Foolproof to use and easy to put on, screen covers won't last forever, but there are 3. Good, but a missed opportunity to be excellent and well priced!

Excellent screen protectors I only used 1 so I have 2 spares extremely easy to fit with the guide provided also you have 3 cleaning wipes and a soft linen cloth,looks great,highly recommended.

Dopo aver installato entrambi i vetri su due dispositivi diversi, posso dire che questo set UNBREAKcable è una scelta eccellente per chi cerca una protezione discreta ma efficace, con un’applicazione semplice anche per i meno esperti. 🛡️ Doppia difesa 2.5D: Il vetro temperato è due volte più resistente rispetto a quello standard, con durezza 9H. Protegge lo schermo da graffi, urti e cadute accidentali, e in caso di rottura si frantuma in pezzi smussati, non taglienti. 🫧 Applicazione senza bolle: Il design leggermente più piccolo rispetto allo schermo evita sollevamenti ai bordi curvi e garantisce compatibilità con la maggior parte delle custodie. L’adesione è immediata e senza bolle, grazie al kit incluso. 📱 Sensibilità e trasparenza: Il vetro è ultra trasparente e non altera la qualità del display o la reattività al tocco. Il rivestimento anti-impronta funziona bene, anche se dopo qualche ora di utilizzo qualche segno resta inevitabile. 🌱 Sostenibilità certificata: Il prodotto è certificato ClimatePartner, con emissioni di CO₂ misurate, ridotte e compensate. Un bel plus per chi cerca anche un impatto ambientale più consapevole. ✅ Pro Alta resistenza ai graffi e agli urti Applicazione semplice e senza bolle Compatibile con la maggior parte delle custodie Certificazione ambientale ClimatePartner ❌ Contro Non copre i bordi curvi al 100% Il kit non include accessori per rimuovere vecchie pellicole 📌 Conclusione: Un vetro temperato ben progettato, che protegge senza compromettere l’estetica o la funzionalità del tuo iPhone. Se cerchi una protezione affidabile e facile da applicare, questo set UNBREAKcable è una scelta sicura.

I just installed this screen protector on my phone but I’m already loving it, and their warranty which says they’ll replace if defective is great. I’ve previously used the JETech screen protectors (iPhone 11) and they ALWAYS crack extremely easily so I’ve decided to try something new. My screen already seems much more receptive to touch with this new screen protector compared to the JETech one. Super easy application too, no bubbles or lifting around the edges, and took about 45 seconds!

何の問題もありません 浮いたりもしないし、タッチ操作も大丈夫です

Serve più che bene per l'utilizzo previsto, buon prezzo, non difficile da installare con qualche attenzione, ancora in uso dopo lungo tempo.

Très bien, fait le travail