Abatron WoodEpox Kit - 12 oz - 2-Part Structural Epoxy Adhesive Filler - Wood Filler Putty

After driving myself nuts reading reviews and comparing so many products, I settled on this Abatron WoodEpox. I will filling holes and other voids from rotted wood in an outdoor column and the base. I first used another company's product to harden or petrify the wood (PC-Woody Wood Petrifier) then used Abatron Wood Epox to fill the holes. The package is very light, weighs almost nothing. The product is not wet at all (not like the peanut butter consistency I was expecting)....rather dry actually...to the point where the product with a couple of firm taps, fell out of the container exactly in the shape of the container - both parts A and B. This seemed strange, but actually worked out perfectly. Wearing gloves, I just kneaded both parts together by hand. It is sort of like the consistency of chewed chewing gum or a dry-ish bread dough. Again, this worked out perfectly for pressing into holes and forming to conform to other areas and contours - it won't run or droop - stays exactly where you put it. The other great part is that you have a generous working time of at least 20 minutes, which takes a lot of stress out of the process. Also, if you dip your fingers into isopropyl alcohol you can smooth the product out nicely, reducing the amount of sanding once hardened. Next day this product had hardened very nicely.

Both components are dry and when introduced to each other becomes a putty that is easily applied. Fills voids and works great.

Good product although expensive. Works easily, stays where you put it, does not droop, smooths with wet hand or tools, hardens solid, have not tried to sand yet.

works well. easy to mix. working time long enough to get the job done. USE VINYL GLOVES. tends to get "sticky" as it is used. lightly moistening gloves (spit) helps. had damage on a header board behind fascia board. much easier to build up the rotted areas than to cut out and replace the header. rot depth about 3/4 inch on nastiest place. prep the board. remove rot, seal with liquid epoxy.

This product worked better on vertical surfaces than the bondo or powdered wood products I've used in the past. Had some porch posts to repair as well as a couple of railings and this product in conjunction with the liquid wood hardener works quite well. For the tops of the horizontal railings that had some shallow rot I used the epoxy putty mixed with some of the hardener and it was easier to spread and push into the wood surface. The product is expensive but if you're working on irreplaceable trim I think it's work the cost. I was surprised at how easy this sanded too. Hopefully the repairs will last indefinitely.

I used this to fill in voids in some of the logs in our cabin after removing loose wood and treating the remaining wood with the company's Wood Epoxy. This stuff is like light, fluffy foam clay. Mix the two parts in your hands (wear gloves) and stuff it i to any voids and it will harden up nicely so you can shape it with normal wood-shaping tools (files, rasp, sanders, etc). Then prime and paint. They say it won't absorb water, and so far I believe them!

Works well. seems stronger than the wood. i used it to repair a spindally stool leg; part of a wooden stool with a tapestried top I made in jr hi decades ago. i put a pencil-sized dowel in the center of the leg years ago after my sister tipped it on one leg while standing on it. That worked for years with a glue, but this seems stronger. I didn't know how much i would need and made quite a bit extra. it has a fluffy, spongey texture when mixed. My daughter made the leftover putty into a model of a shark. cute.

It is surprisingly light weight. It is workable for a reasonable time, curing much more slowly than liquid epoxies, bondo paste, or the usual wood fillers. It sands and shapes easily, and for complex profiles should yield better and easier results than alternatives. However, I question its bonding power and durability. It's difficult to apply without leaving small voids, it isn't as sticky as other products, and it is softer. Screw hold will probably be pretty weak. Tooling requires wetting your tool with alcohol with each pass to get a smooth-ish profile. It will hold in place and keep its shape far better than softer or more liquid alternatives. You'll want to power sand with finer grit to get a smooth surface before priming and painting. Using wood hardener before applying is likely more critical for bond than with liquid epoxy and is recommended in the directions. All in all, I judge it a good product for use in the right application. Whether that includes my rot repair to a wood storm window panel -- exposed to sun and weather -- remains to be seen. After trying the product, I think I'd avoid using in locations that see big temperature swings or vibration. For repairs to damaged trim, such as indoors or on a protected doorframe, however, it seems a very good product and DIY friendly. Unfortunately, mine had been previously opened and used. Check yours on receipt. UPDATE. I applied it to replace the rotted corner of an old fashioned wood framed storm window. After 9 months, including a harsh midAtlantic winter, lots of sun exposure, and a hot summer, the product is still holding up well. The paint has conyinued to adhere to the product well, also.

Quando vivevo negli Stati Uniti, usavo sempre woodepox. Sono così felice di poter comprare in Italia!

This product is significantly superior and cheaper than anything available in Australia. Application is easier, especially when replacing missing wood. It sets solid. It sands super smooth. It's paintable after priming No wonder I can't find it here on shelves.

In two boxes is a paste which I’ve melted in my hands wearing first gloves. It’s ready in two minutes but to shape it was better after another 10 minutes. The filler was very good for me because doesn’t dry in seconds so I’ve had a time to put it everywhere where I needed and even I could move from one place where I used it too much to another hole where I didn’t have enough of filler. So far I’m happy with the product but we can see in a year 😁

Perfetto

Just try. You will see 😉