Bilt Hamber Auto Foam (5 Litre)

A very good and safe way to contactless pre wash your vehicle - definitely one of the better pre washes on the market. Bilt Hamber uses PIR (panel impact ratio) to calculate the correct mix ratio of product/water so you are always going to get good results as the mix ratio is calculated to the performance (flow rate) of your pressure washer. It is very easy to calculate, instructions are on the container or can be found online. Overall the results are very good; it is not a high foaming product as some pre washes are, but thick foam does not mean good performance. Leave to dwell for 5 minutes then rinse, all light dirt will be gone and any heavy soiling will have been softened, making it easier to remove with the pressure washer or by hand. A useful thing to do if you have heavily soiled wheels & tires with plenty of brake dust build up is to spray each wheel with your wheel cleaner before applying this product, then spray this over the top covering both wheel and tire as it will increase the dwell time of your wheel cleaner making wheel cleaning a lot easier. I’ve used about 20L of this so far on a number of vehicles and it has always performed well. Half a litre is usually enough to cover a medium sized car, so 5L does go a long way. It’s also kind to any pre applied waxes or treatment on the bodywork and will not strip or thin these out.

The difference from the Karcher supplied foam is night and day. Goes on brilliantly via the Karcher wand bottle - only used 100ml for all the car and almost went round it twice to use up. Strips the UK winter grime and salts easily - brilliant product.

Bought again as my BH snowfoam had depleted. Really good quality car snow foam which I apply via Kranzle Snow Bottle attached to a Kranzle cold pressure washer. This BH product is really great for cleaning your car BUT you need to get the ratio of snowfoam to water correct. Takes a bit of trial and error. Apply using snow foam lance at correct spray setting and leave to dwell on vehicle for 10 to 30 mins then simply spray off with pressure washer attachment. Have tried various snowfoam products over the years, Auto Finesse, AutoBrite, to name but a few but have always found BH products to be the best. Again only gripe is that the prices of BH always seem to creep up as is always the case with a superior product. This review is my own personal experience of using this Bilt Hamber Snow Foam and oothers will disagree. Thanks in advance.

The best snow foam. It is not thick, but is effective. You can see the dirt being dragged off the car with this foam. I’d highly recommend.

Strong high alkaline pre-wash that really gets rid of the dirt from the car. Maybe not ideal for non ceramic (such as spray on's) coated cars; unless you are like me and look forward to trying the next coating out anyway.

I use this Bilt Hamber snowfoam by diluting 8:1 in a Monza foam lance. It goes on less clingy than some others and it does not smell of tropical fruit but when allowed to dewll and then pressure washed off, it removes enough grit, traffic film and other grime, to allow the contact wash to go ahead with much less risk to your pristine paintwork. All of my cars are coated with either a carnuba or a hybrid ceramic wax so just the snowfoam is great for a non contact intermediate wash during winter. In summer I always do a follow up contact wash using two buckets and I use this Bilt Hamber in the shampoo bucket as well. It is unly my subjective opinion but this is better than other brands of snow foam that I have tried in getting a car clean as either a foam only or a foam plus contact wash. That said, my cars are very well prepped, suface wise, because of the wax or hybrid coatings. I have even used this stuff at a 1:30 dilution as a clay lube prior to paint correction or polish plus glaze and it works as well as quick detailer or clay lube IMHO. I have compared with both 'cherry' and 'polar' products and I think this is better.

Has to be the best snow foam on The market!

Does the job, its not as miraculous as some reviews would have you belive, however I suspect my experience is down to my own incompetence at car cleaning. I did not notice a difference between this and cheaper ones, except that this is less foaming than the others I have used. Maybe I expected too much from it, the stars reflect the fact that its priced higher than others and in my experience performs about the same as cheaper ones. You may have a better experience so suggest that you try it and compare for yourself.

It doesn’t foam much which I already knew, however, I read and heard that it is one of the best prewashes out there. I used it in my pressure washer foamer before washing and it removed practically all the dirt and dust making for a very thorough wash. Again, this doesn’t foam much but it doesn’t need to. It lifts all the dust and dirt right off the paint. This also makes for a good “in between” washes product. Merely foam on, rinse off and car looks great

Der Bilt Hamber Auto-Foam ist für mich die absolute Nummer eins bei der Fahrzeugvorwäsche. Im Gegensatz zu vielen anderen Schaumreinigern erzeugt er zwar keinen extrem dicken, künstlichen „Rasierschaum“, aber die Reinigungsleistung ist unschlagbar. Er weicht selbst hartnäckigen Straßenschmutz und Insektenreste perfekt auf, sodass sie sich danach einfach berührungslos abspülen lassen. Das schont den Lack maximal vor Kratzern. Der 5-Liter-Kanister ist zudem extrem ergiebig und bietet ein top Preis-Leistungs-Verhältnis. Absolutes Profi-Produkt!

Sin duda un producto realmente eficaz

濃度にもよりますが、コンタクトウォッシュ前の事前洗浄能力は非常に高いと思います。 自分の場合は4%〜2%希釈濃度で使用 泡立ちは良いとは言えないがそもそもそういう物であり泡泡である必要は無いため、逆にそれが良いように感じる 雨の後の高速道路走行翌日、50倍希釈で噴霧→すすぎでほとんどの汚れを除去できている。 濃度が濃いとすすいだだけでは表面にアルカリ成分の張り付きが多い印象。

Utilisé avec canon à mousse de 1,5L : 250ml de produit + 1,25l d'eau -La mousse est homogène avec un canon à mousse standard + karcher K4 + pistolet tool daily trouvé sur amazon -cette quantité permet de nettoyer presque 2 voitures. Néanmoins, comme la mousse sèche relativement vite je préfère utiliser le surplus pour refaire un deuxième passage et bien charger au niveau des jantes. -Testé pour l'instant une fois sur 3 voitures : passage de la mousse - attente de 10 minutes - rinçage pression et j'ai laissé sécher sans aucune intervention manuelle. (A l'ombre surtout pas au soleil) -les 3 voitures sont ressorties brillantes et j'étais très surpris surtout par le manque de traces au niveau des vitres. Fonctionne très bien sur les jantes . Néanmoins une des 3 voitures était très sale avec des tâches incrustées, bien qu'elle soit ressortie propre un petit frottage manuel a été nécessaire au niveau des incrustations de longue date, ce qui est normal de mon point de vue.