SPARIN Screen Protector for iPad 6th 5th Generation/iPad Air 2 9.7 inch | 9H Tempered Glass , High Definition, Scratch Resistant, High Touch Sensitivity Case Friendly & Apple Pencil Compatible

Aquí tienes una reseña positiva en inglés:⭐⭐⭐⭐⭐This iPad screen protector is excellent! It was easy to install, fits perfectly, and has great touch sensitivity. The screen remains crystal clear, and it protects against scratches and fingerprints without affecting the display quality. It feels durable and gives me peace of mind knowing my iPad is well protected. I highly recommend this product.

Simple directions. Easy to install and looks great. Would definitely buy again when my kids break it eventually 😆

UPDATE: I've added 2 stars to my original review. A few days after I posted a 3-star review complaining about an apparent quality control issue (particulate matter stuck to underside of the protector *inside* the protective sheet), I received a direct email from a company representative apologizing for the problem and offering a free replacement. I was very busy & didn't respond to the email at first, so I received a 2nd email with the same offer a couple of days later. I emailed back, verified my shipping address, and a few days later a new package was on my front porch. I waited overnight for it to warm up to room temperature, removed the defective protector from the iPad, and installed the new protector after very, VERY carefully inspecting it and using the installation kit to clean the iPad's screen. There were no adhesion problems, very few bubbles (all of which were easily cleared in a matter of moments), and only one tiny imperfection that is literally invisible without a magnifying glass and a careful search. I am very pleased with the replacement product and happily shocked at the exemplary customer service. (To repeat, the company contacted me with an apology & no-strings-attached replacement before I had the chance to contact them.) As of now, I'll definitely buy from them again as needed in the future.One quick note: As mentioned in my original review, there are stick-on tabs to create a "hinge" to help position the screen protector prior to installation. This time around I did not use them and found it easier to carefully position the screen protector the old-fashioned way. If you buy this product I recommend practice fitting the protector (BEFORE removing the film covering the adhesive!) with the hinges so you can tell if it would be easier for you to place it correctly with or without them -- I'm sure the choice will vary among buyers.ORIGINAL REVIEW: I've used tempered glass screen protectors on a variety of devices, and the reviews of this one led to high expectations. I was amazed at how well-packaged it is: a semi-rigid heavy cardboard "book" style folder, with a separate "installation kit" inside along with the screen protector itself in a protective sleeve and an internal frame keeping everything in place & protected.Unlike my experience with several other similar (smaller) protectors of other brands, the installation kit was complete and -- hooray! -- the "wet" wipe was actually wet. (Be careful opening the installation kit; I accidentally tore off a small part of the instruction booklet.) The first thing I noticed was more complete/complex instructions than I'd expected, along with a note saying I should view an instructional video on YouTube. The video came up right where it was supposed to be, but I immediately noticed that it skipped over 1 step in the printed directions (use the dry wipe after the wet wipe but before the microfiber cloth), and did not show or mention the stiff card (size of a credit card) intended to help move bubbles out from under the screen protector as the final installation step.One very helpful feature of the installation kit was "hinge" stickers that let you pre-position the protector and then swing it out of the way to thoroughly clean the iPad screen, then just swing it back into place for installation already in the correct position... at least in theory. I still had to be very careful positioning the protector because the stickers still allow a bit more side-to-side wiggle than is perhaps absolutely necessary. It was when the protector was in place and beginning to adhere to the iPad screen when things went a bit sour.Before using the installation kit, I had buffed the iPad with a clean microfiber cloth until it shined. I then used the installation kit's wet wipe, making sure to cover every tiny bit of the surface, followed by careful wiping with the kit's dry wipe. I then buffed the iPad with the microfiber cloth from the installation kit, followed by the included "dust absorber" (a big sticker you lightly tap all over the screen to pull off any dust particles that somehow were missed in all the preceding steps). At every step, I carefully inspected the iPad for dust, fingerprints, and any other kind of marking, checking it at multiple angles in direct & indirect lighting. (I can be a little obsessive when it comes to screen protectors.) I checked the screen protector one more time at different angles, and saw a few little spots I decided were probably dirt on the protective film. I then peeled the protective film off the back of the screen protector, swung it down onto the iPad, and began pressing out a few bubbles......only to find 7-8 bits of kind of particulate matter causing permanent bubbles scattered across the screen (not to mention the entire upper left 1/8 of the screen protector not sticking nearly as well as the rest of it). I peeled the protector back, did some more cleaning, reapplied the protector, and had the same particles in the same spots. I then very gently used the "dust absorber" directly on the sticky side of the screen protector and reapplied it for a second time, and was rewarded with just a few small bubbles I was able to manipulate out.As of now, the upper left 1/8 of the screen protector seems to be sitting on the iPad screen and not actually adhering to it (that's 1 star off), and I'm a bit annoyed at how I had to clean particulate matter off the supposedly clean & protected *sticky* side of the screen protector (that's the 2nd star off). For the moment it seems to be staying in place & remaining clean, but I'll have to think twice about another of the same brand in the future.

This product surpassed my expectations! It was easy to install, great quality, and my IPad screen touch efforts are as they were when my IPad was new! Currently I have a generation 6 IPad. I definitely will buy again.

If you can manage to install this screen protector without any dust or foreign debris under it, it will probably do a great job. However, that's the problem.Installation involves positioning the protector on the screen, and using stickers to create a sort of temporary hinge. Once you've done that, there is a provided wet wipe to clean the screen, and a microfiber cloth to remove excess cleaner and fingerprints. Next, the protective film must be removed from the glass, and here is where the problem lies.Unless you have an ISO-9001 certified clean room at your disposal, I'm not sure how you can install this screen protector without getting any dust under it. Removing the protective film creates such a buildup of static electricity that I could feel it, hear it, and even smell it. It attracted dust out of the air, and by the time I got the glass onto my device and pressed down, the dust was sealed in. It might not have been so bad, except that it creates a bubble around it where the glass is not in contact with the device, and it's very obvious, even for a small piece of dirt.I removed the glass from the device, and attempted to remove the offending debris, but only succeeded in making the problem worse. It quickly became apparent that I was not going to be able to use this screen protector. I was very hopeful for a product that got so many positive reviews, but I am now disappointed.Two stars, because as I said, if you can manage to get it installed without dust, it probably works just fine. Good luck.UPDATE: I was contacted by Sparin regarding my review above, and they offered to provide me with a free replacement. We had a bit of email difficulty, but kudos for excellent customer service. I received the replacement today, and I just happened to have a room in my house where I had just remodeled, so it was clean, clean, clean. I applied the screen protector there, using the no stickers method (search YouTube for "SPARIN A02"), which I would highly recommend. This time, I got the screen protector installed on my iPad with no dust and only minor bubbles, which I was able to work out. As I predicted above, once the screen protector is applied with no dust, dirt, or bubbles under it, it looks fine. It feels smooth to the touch, as you'd expect for glass, and it doesn't add much in the way of thickness. My case still fit around my iPad with no issues. It seems to be pretty scratch resistant. As for shattering, only time will tell (or hopefully, it won't!).I'm updating my rating from 2 stars to 4, based on the customer service, and the apparent quality of the product (once you get it installed properly).

Great product, awesome seller, Quick delivery. tried many types of screen protectors & this one by far is the best. easy to install and comes with what you need to clean & prep your screen for installation

Do you guys make these for Galaxy S10's because I want one of these for every screen I touch on a constant basis now. The first protector I bought from this company for my iPad(6th Gen) was the wrong size, however I liked what I saw when I opened the package. It was put together with attention and care, the product application directions were VERY SIMPLE and easy to follow. (Follow the directions guys, it'll save you so much time and frustration. Your mental health deserves it :) ) Everything was foam or plastic wrapped, and there was even a cushion liner to protect the screen cover. I loved that the screen protector is hard, and felt durable. So guess what I did guys? I asked for a refund to return the wrong sized one and then I went and re-purchased another one that was the correct size from this very same company. Was it there fault it was the wrong size, maybe or maybe it was mine. No one is prefect and I wanted to give them another shot to make it right. The same treatment I would want. The new screen cover came a day early (thanks amazon) and I installed it right away in 15mins flat.TIP: Follow directions, tie your hair up, do it in the daylight with the iPad powered off so you see the dust against the black screen when cleaning. Hold your breath when installing the cover and close it quickly when you take the adhesive off of the backing. Don't think you can do it without getting dust under the cover? I installed mine with a ceiling vent overhead, don't recommend but trust me you can!There is a bit of screen that is exposed around the edge which I don't mind if it was fully covered my iPad case wouldn't fit.All of this for such a low price, kudos to this company for delivering quality at a low cost. I don't typically do reviews but I'm over seeing good business's close down during this economic downturn. I would buy this product again and recommend it. It gets the job done. No bubbles, no dust circles, the screen is protected and I'm happy!

The screen protector we received for our daughter's iPad was amazing. It fit perfectly, matching the size of the device flawlessly. We were delighted to find that it also came with easy-to-follow instructions on how to install it.The package contained all the necessary tools to ensure a smooth installation process. We carefully cleaned the iPad screen using the provided cleaning cloth, making sure to remove any dust or fingerprints. Then, following the step-by-step instructions, we peeled off the protective film from the screen protector and aligned it with the edges of the iPad screen.The screen protector adhered smoothly to the device, leaving no bubbles or imperfections. The clarity of the protector was outstanding, preserving the vibrant colors and sharpness of the iPad's display. Our daughter was thrilled to see her favorite games and apps with such clarity and precision.Moreover, the screen protector provided an added layer of protection against scratches and smudges. Our daughter can now use her iPad worry-free, knowing that the screen is shielded from any potential damage.The precision fit and easy installation process of this screen protector exceeded our expectations. We are highly satisfied with this product and would definitely recommend it to anyone in need of a reliable and high-quality screen protector for their iPad.

Die Folie ist recht steif und hält so den zersplitterten Bildschirm meines Ipad zusammen. 😊😀Guter Kauf, Ipad funktioniert trotz Sprung perfekt….

Good item

Verre trempé absolument parfait.celui ci s est posé très facilement et enveloppe parfaitement l écran.Lorsque j utilise l écran j appuie à peine et j ai ce que je souhaite.Je suis très contente de mon achat.

Fantastic product, worth every penny, exceeded all my expectations

Facilissimo da applicare. Una volta centrato, si è applicato alla perfezione senza creare nessuna bolla d'aria. L'unico accorgimento che ho usato è stato di mettermi in modo da poter controllare in controluce se dopo aver pulito lo schermo ci fossero ancora granelli di polvere, perché ne basta anche solo uno microscopico per creare una bolla d'aria. Una volta accertatami che lo schermo fosse perfettamente pulito, la pellicola è andata giù perfettamente da sola.