Antec Performance Series P120 Crystal E-Atx Mid-Tower Case, Tempered Glass Front & Side Panels White Led USb3.0 X 2, Aluminum Vga Holder Included - Pc

نوعية جيده جداً لكن ، باهظ الثمن . سعرة 118$

Stasvo cercando da tempo di acquistare il lian-li O11 per poi scoprire questo! A differenza del lian li non offre i 3 slot per le ventole superiori perche' c'e' il comparto per il psu. Pannello sia frontale che laterale in vetro temperato ma soprattutto quest'ultimo presenta una maniglia per aprirlo senza bisogno di svitare viti il che rende operare/pulire il pc molto piu' semplice. Per il montaggio niente da dire se non di stare attenti col cable management che risulta difficile per il poco spazio posteriore. A parte quello potete andare tranquilli ed acquistare questo bestione. P.S. in caso volete installare un radiatore/ventole da 360mm nella parte vicino al vetro frontale dovrete rimuovere gli slot per gli hard disk ma comunque anche con 3 ventole/radiatori dfa 360mm uno slot potete lasciarlo tranquillamente.

底面吸気、側面・背面排気の珍しいケースです。 昨今のトレンドに反して、電源ユニットが上部取付となるのも珍しいかもしれません。 底面に引き出し式のダストフィルターが付いているのでお手入れカンタン、かつ吸気ファンからの風をダイレクトにグラボに当てられるので設置場所によっては冷却効率が良くなるかもしれません。 電源ファンが上部にある、という事でデザイン性に疑問を持たれる方もいらっしゃるかもしれませんが、個人的にはむしろカッコいいと思います。(電源ユニットの側面が露出するので、それなりに良い電源を用意するとより良いと思います)。 電源ユニットの前に3.5インチベイが2つ着いていますが、これは側面に280mm以上の簡易水冷ラジエーターを入れる場合、排他利用になりそうです。 自分は最初LianLiのO11で組むつもりでしたが、あちらはNH-D15が入らないので此方にしました。 底面に14mmファン3つ、側面に14mmファン2つ、背面に12mmファン1つ搭載して運用しています。 内部のスペースが広いのでパーツの自由度が高く側面パネルも開閉可、また強化ガラス製で美しい上に細部の作りも安っぽさが皆無なので、本当に良いケースだと思います。1万円超えのPCケースは確かにそこそこのお値段に感じるかもしれませんが、本品はお値段以上の出来だと断言します。 惜しむらくはやはりガラス製なので傷つけると気になってしまう点、また側面に配線スペースがあるとはいえ、やはりほぼ全面ガラスなので配線にとても気を遣う為初心者向けとは言えない点ですが…そこはもう仕方ないかなと思います。 余談ですがダンボールから開封する際、箱から出そうとして持ち上げた時に重さと運動不足でぎっくり腰になりました。これから買う方はご注意を。

I really love this case. It looks beautiful and the fact that it has 2 tempered glass panels is really cool! This is especially important when considering that cases like this are normally $140+. Pros: - Dust filter included! - The bottom dust filter is actually a pull-out tray/dust filter which is super nice! - Power supply shroud is at the top of the case which in my opinion makes the case look neater and less crowded. - Tons of screws included (and cable tie-downs/velcro) so they supply all that you will need. - Graphics card holder is included which in today's day and age where graphics cards are getting heavier this helps ease the stress on the PCI express slot. - Enough room for cable management and there is places along the edges of the case to router cables around for less crowding of cables. - 2 SSD slots in the back and 2 hard drive cages. - Top panel has light-up USB 3.0 slots so if you like that then it's there. - Possibility to have: - Vertically mounted graphics card - 2 radiators/water cooling - The tempered glass door can be taken off which is nice! - The ability to fit E-ATX motherboards - Overall everything looks very nice. Cons: - If you are wanting to mount 3 fans onto the side of the case or do anything special towards the top of the case you will have to remove one if not two of the hard drive cages because there isn't enough space for 3 fans and both drive cages. - Maybe it's just me but having a cutout in the power supply shroud is a downside because at least for me my Seasonic power supply doesn't look that good lol. - There are these cut-outs at the bottom of the case which I assume is to feed wires through but they are just so big that you can see the cables being routed at the bottom/backside of the case. It's just more of a cosmetic thing. - Doesn't come with fans, which I know increases the price of the case but could be a downside for some people. - The front panel, unfortunately, doesn't have combined audio and mic jack. Which could maybe be a problem for some people? - From my understanding, if you want to put 3 fans at the bottom of the case you will have to (temporarily) remove one of the bottom case stands to access the area to screw in a 3rd fan. I only had 6 fans so placing only 2 at the bottom wasn't a problem but for some people, it could be. - No cable shrouds included which is purely just cosmetic/cable management problem but it would be nice to have the ability to cover up some of the cables being seen through a hole put in the case. However, it could increase the price so it's fine. Overall this is a wonderful case, and for the price, it's even better! I would recommend this case to friends (already have) and would personally buy this case again if given the choice!

Un bon boîtier de chez Antec, la structure est bien solide, pas de plastique mou et beaucoup de place pour accueillir une belle configuration. ( le liquid freezer 360 assez épais de chez Arctic y rentre facilement mais il faudra retirer la cage à disque 3.5). Une belle finition, de beaux matériaux et une ouverture de portière en verre facile. Attention pas de montage sur le haut du boîtier cet expert réservé à l'alimentation.

I am reviewing this product after few days of using it, let me start with the delivery process, there was a slight delay in delivery but I understand that it wasn't intentional because the product had to be shipped from Delhi and the destination was in South india a city called Mysore, the delivery person was very helpful and even helped me unpck the box to check for any damages or breakage of the product glass during delivery, for the packaging side i give the rating as 3 stars only because the box was damaged during transport and should have taken extra care because it's an item with an tempered glass inside and no instructions were on box to mention it, also as much as I admire the Amazon's stance on not wasting additional packaging to reduce unwanted wastage of materials atleast they should take care of products which are delivered without it, why I would like to mention this is because Amazon is not only doing this in India they're doing it globally as the rtx 2080 delivered in UK too was not packed with outer covering and such an expensive piece of hardware should not be delivered that way it's fine for products with less valuable to be delivered in Amazon's way, I received a small 4 pin CPU fan splitter with proper full amazon packaging which was really unecesesary to be honest, let me come to the product itself, the product is well built and sturdy compared to most cases on market for the price range of below 10k, only thing is it's bit on heavy side due to tempered glass on frony and side it weighs at 13kgs and the since it's glass try to handle it with care while installing stuff in it we can easily remove the side glass while installing motherboard or other components to avoid damages, the case doesn't come with any built in fan unfortunately for any people who doesn't want to spend extra on custom fans but it's understandable because to reduce extra costs it was needed and for many enthusiastic person they wouldn't even need basic fans and it's unwanted and simply an waste, the case cable management it's the best in class unfortunately as there is no rubber pockets to pass any cables from behind the case to hold any wires and if you don't have an modular psu it's very difficult to manage the cables behind the case also there is no many cable tag points in case to properly route the cables which is a shame, even with a basic setup the case looks good and also there is an provision like most new cases for vertical GPU mount and there is also an GPU support bracket for long cards to avoid any sagging, but there is no pcie Riser cable provided with the case so we need to search one online to get a good one unfortunately for a good price, PS don't go for any cheaper riser cables below 3k those are very bad quality, currently I am running with an basic GPU since I am waiting for an new version of RTX cards which are to be released in 2020 and this case has very good support for very huge cards upto 35+ cms that is and support bracket holds them well unfortunately I can't test it presently Because of lack of large GPUs. There isn't much of sound proofing in the case compared to be quiet series cases but aesthetically it's an beauty to watch especially if you are looking for water cooling or using LED mods this case it's the best one out there, also there is no power or hdd usage LEDs installed in the case but there is an provision for light around USB ports using an additional sata power connector also there are USB 3 ports and power and reset buttons providedon top of the case which also function great , overall Antec has done a great job maybe a future revision will be made with further improvements, I'll update the review once I get more components installed in the case.