Bondic UV Glue Kit with Light, Plastic Welding Kit, Curing Light Liquid Plastic Repair, Jewelry Making, Necklace Craft, Super Glue Adhesive Epoxy Ultraviolet Mold for Glass Epoxy Resin Supplies

This product is insanely good and saved me money and my sanity. Unfortunately, I had a tail light get damaged. A big chip with a chunk missing. This little thing was at my house the next day, and took me 30 minutes to fix. I sanded and touched it up with paint. The result is crazy good. You can never tell there was any damage. I wish i knew about this thing before. I never really write reviews but i had to because it's that good!

I have a home weatherstation which is excellent, but I find sometimes it does not give accurate rainfall amounts, especially when the rain is blowing horizontal. So I bought an old-fashioned but highly accurate gauge made of plastic. ONCE during this past winter we had about a quarter inch of rain that then froze overnight. The ice expanded and put a crack in the base area of the cylinder such that any rain always leaked into the larger cylinder that is useful for measuring precipitation greater than one inch - the inner cylinder is graduated up to one inch, and any further rain simply overflows and to get the total you pour water from the big into the small in 1" aliquots till you've emptied/tallied the total water in the large cylinder. But it just bugged me that it was rendered a little defective, so I bought this UV-activated glue and used it to seal a crack in the plastic that was about 1/2 inch long. It was not structurally compromised, just separated enough for water to seep through. I did two treatments and it worked completely as desired to seal the leak. I like this stuff, have used it a number of times in the past, and found that it is excellent FOR SOME THINGS, and not so strong as say, two-part epoxy or even superglue, at holding things together that come under duress to not stay together. It is very nice that it only takes a few seconds to react to the little UV light that comes with it. Dries clear. I would buy it again.

Dispenser pen oozes fluid after pressure is released, requiring user to direct attention to wiping the pen tip before using the UV light to cure applied resin. This can cause a problem if trying to build a thick spot or layer of resin, as it gives the resin time to “flow”. Perhaps resin should be offered in two or more viscosities, for different outcomes? Also, UV pen does not always cure the resin in four seconds, as claimed. I find that it often takes 20 seconds or more to cure even a thin layer of resin.

I was hoping this could be used to fix broken reading glass frames better than superglue which can be messy, but it wasn't that strong of an epoxy. It worked as described and cures fast under the UV light, it just wasn't as sturdy as I needed. If you've ever bought a new ballpoint pen that has that plastic on the tip that keeps it from drying out you have to remove before using the pen, that's pretty much the consistency of this epoxy. I can't say it's bad, just not ideal for what I needed it for. The applicator and light worked great though, and I really like product and execution otherwise.

Doesn’t work. I’ve tried to use this on a couple applications where the plastic had broke and it fails every time. It’s very weak. Might work for tiny plastic parts but nothing that will be handled a lot.

I recently used a tube that I have had for 39 months. I was pleased that it still worked perfectly as I keep it for emergencies. The resin was a little yellow colored but dispensed well through the tip smoothly and cured very fast. (You squeeze the tube to dispense it faster. Thee is a surprisingly large amount in there.). Dispense a blob and after 2 secs with the light it is cured and hard. I repaired a large mophie (backup battery) that got run over by a car. It had big cracks in the case and a chunk of the former 1/2” x 3/4”’was exposed as a hole. I filled it in from the edges by “stretching” a few beads across the gap to make a mesh of sorts. I filled in the cracks, put the edges together and held them together while I applied the light. Worked great. Could easily sand it smooth to match the contours. I think this is a fantastic product.

Glues almost everything very quickly and easily but couldn’t glue Miss 4 year old’s plastic tiara together, even with building up the product. Just wouldn’t hold on one side. I think it’s the kind of plastic that can’t be glued.

I was skeptical about this at first but I decided to give it a try. Boy was I glad that I did. This is NOT a glue. This is a plastic bonder material that works fantastic when you realize this is not a typical glue. There is nothing sticky about the liquid nor would it ever stick to anything without being used in the manner it was intended. It is a chemical that requires a LED light to cure the material to make it harden. Follow the directions and you'll have a permanent bond of whatever it is you are trying to repair. For example, I tried to repair a broken arm on sunglasses with super glue and of course it broke within a few wears of the glasses. Using Bondic the arm has yet to break and this is after months of wear. I believe the arm would break in another spot rather than where I repaired it, its that good! If you follow the directions and use this product as intended, you will find this is a superior product to any glue and has unlimited uses.

C'est formidable . J'ai réparé une pièce d'un appareil ménager , il fonctionne à nouveau. Je recommande ce produit.

Bonds in a few seconds with the UV light. Sand it to the shape you want. Amazing alternative to super glue.

Despues de ver los diferentes videos incluso en Youtube te quedas sorprendido de las prebendas del producto. pero cuando realmente lo he usado , no sirve para nada. Al menos al intentar pegar la carcasa de un mando a distancia de plastico. Al final loctite y perfecto. Esta es mi opinión, tal vez alguien tenga la amabilidad de explicarme o haré un master en Harvard. ya digo es mi opinión. EDITO: Después de haber hecho varios intentos, he podido comprobar que he sido injusto. Se trata de seguir fielmente la instrucciones. No por echar más liquido va a pegar mejor, ni por estar más tiempo dandole luz indrarroja. todo en su justa medida. seguir las instruccicones del fabricante o buscar algún video por you tube. Perfecto, es como una soldadura. Me vino otro mando roto y lo volví a hacer y me quedó mejor que con el locktite. Lamento la opinión que di por mi ignorancia. lo siento.

¡ El producto es excelente y funciona de maravilla ! Lo que compré, ya me lo acabé.

really good adhesive, very solid after its cured. water tight too.