DacMagic 200M (Lunar Grey)

Not sure if this a great value compared to other competing products at $550. But it works great! I bought it to hardware decode MQA format files, which according to the hype is the purest sound available. After getting it, I downloaded Tidal to check it out. On a Mac, the setup was relatively painless. You have to tell Tidal to send the music data to the CA DAC Magic for processing (the CA DAC Magic 200M is in the choices). There is additional set up to tell Tidal that you want the CA DAC Magic to hardware process the MQA. From what I can tell, all this setup circumvents the Mac MIDI set up (which is what I had to use to have a FIIO DAC work properly). I initially messed with MIDI setup and it honked the interaction of Tidal with the CA DAC Magic.. it worked just wasn't hardware processing the MQA files (based upon the CA DAC Magic LED lights). Anyways, I rebooted a couple times and restarted Tidal each time and it worked itself out to lock out the Mac MIDI. Had it a few days and it is working flawlessly now. Sometimes have to wait a several seconds for Tidal/CA DAC Magic to start streaming if the computer goes to sleep and/or CA DAC Magic goes to sleep. Anyways my system sounded great already, I would love to say it is hugely noticeable to have the CA DAC Magic in the system with the best processing and best file formats available. All I can say is it is working as advertised, it is hardware processing the MQA files (based upon the indicator lights on the DAC Magic) and my music still sounds great!!! Have now owned the DAC Magic for a week. Have tried listening with and without MQA turned on. It is quite a noticeable improvement to the sound quality with MQA. The best way I can describe it is a visual image. You can have a good image and then you process it to get more contrast and details in the image pop. That's what the sound is like, the instruments/vocals etc become more distinct more defined. Anyway, very happy with the DAC magic and the sound quality I'm listening to!

I have a decent stereo system, but it’s basically an analog system, with the exception of the CD player. My stereo system did have a NAIM Data Streamer, but I hardly used it and traded it in for a REGA Planar 10 turntable. So I listen to vinyls most of the time. I’m an Apple Music subscriber, so at times I would hook my iPhone to my stereo amplifier via a Lightning to stereo RCA connector. The audio quality wasn’t the greatest, but back then Apple Music was only streaming at CD quality resolution, 16-bit/44.1 kHz. Apple Music added two additional data resolution options in 2022. Lossless for a maximum resolution of 24-bit/48 kHz and Hi-Res Lossless for a maximum resolution of 24-bit/192 kHz. So it was a no brainer that I needed a DAC to fully utilize the higher resolutions with my Apple Mac and iPhone. Also, to listen music at Hi-Res Lossless, it’s required to connect to a DAC. So after doing some research, I purchased the Cambridge Audio DACMagic 200M and a Lightning OTG MIDI to USB Type-B cord. The sound quality was substantially much better listening to music through the DACMagic. Actually, the sound quality was incredible! Some of the lessons I learned; 1. Connecting my CD player to a DAC via the optical digital jack connector, the DAC data resolution input was only 16 bit, 44.1 kHz PCM. Limitations of CD Players. No fault of the DACMagic. 2. To see the incoming data rate on the Cambridge Audio DACMagic 200M from my Apple MAC computer, you need to utilize the Audio Midi Setup App. When the computer is connected to the DAC the DACMagic 200M will be displayed on the computer, to be selected. Then from the MIDI Setup select the data resolution format you want to use. Such as 24-bit/192 kHz. This is not necessary when using an iPhone, and the incoming data rate is displayed on the DAC for what ever data resolution you are outputting from the iPhone. 3. The DAC size is smaller than what I envisioned, but it’s built very well. 4. The Blue Tooth connection works good, but you will not get the sound quality of high resolution that you would if using the MIDI connector. I recently downloaded TIDAL to compare the audio quality with Apple Music. When streaming at high resolution, the audio quality sounded about the same with both. When streaming TIDAL Master Quality Authenticated Albums (MQA), the quality sounded better. The DacMagic does a good job with MQA streaming. June 11, 2023 I just recently upgraded my IPhone 7 Plus to an iPhone 14 Pro Max. Apparently, the lightning to USB 2.0 interface doesn't connect to the DacMagic 200M with the newer iPhone. I reached out for technical support and Cambridge Audio states they don’t guarantee compatibility with mobile devices and most likely this issue is related to the audio driver for the audio playback. September 23, 2023 I just purchased the IPhone 15 Pro which one of its upgrades was replacing the lightning connector with an USB-C connector. That fixed my compatibility interface issue that I had with the IPhone 14. The DacMagic 200M works great!!!

probably one of the best purchases I ever made. I was skeptical about DACs and Headphone amps, I tested many. And this one I got mainly for 2 reasons, I needed the XLR output to use with some hi-def studio monitor speakers on my PC. And second reason was my analog headphones never sounded good, even mid to high tier headphones, and I heard this would make miracles with them. On speakers via USB: I first plugged this into old and fairly cheap pair of bookshelf speakers using a default 44 Hz output, then I set my PC to output 384 Hz, which is the maximum from my machine and this DAC support it, and I immediately had an OMG moment, suddenly this pair of old speakers where playing clear details I never heard from them, and on higher volumes it was not distorting anymore. New high-end speakers via USB: I audibly cursed for a while on plugging it in, mad about why in the world I did not got this years ago? Why?! It's such a monstrous sound quality difference. it has no buzz or electric noises at all, even on very high volume without playing a song. Records with acoustic guitars, ambient voice and drum kits recorded with mic, gained a new life on my listening experience. With analog over the ear Headphones: Same OMG moment, suddenly my headphone was crystal clear, no distortions on high volume and each instrument channel was noticeable and defined on music I heard 1000x before. Don't get me wrong, I have tried similar DACs and headphone amps before, but nothing came close to this in quality and in bringing a new life to old equipment. Cons: Sometimes when you're listening to songs via USB connection to a PC, if you change songs the audio disappears. Turning it on and off seems the only solution at the moment. It's worth mention is not always and I'm using Windows 11, which drivers for audio devices have been reposted to behave weirdly. So, 9.5/10 stars, one of my best electronic equipment purchases ever.

I have had the Cambridge Audio DAC Magic 200M for just about a year now and it has performed without issue. It replaced my aging Parasound ZDAC v.2. The 200M is a MQA DAC, Preamp, and Headphone amp but I bought it primarily because of it's ability to hardware decode (unfold) MQA files and for its balanced XLR outputs so I can use balanced or unbalanced headphone amplifiers with the 200M. I have auditioned the Monoprice THX AAA 887, Schitt Magnius, and the Monolith Liquid Spark designed by Alex Cavalli headphone amps with the 200M. The AAA 887 and Magnius have balanced inputs so I had those connected to the 200M with Mogami XLR cables, the Liquid Spark is unbalanced and I have it connected with a short pair of AudioQuest King Cobra RCA cables. I currently have the Philips X3 open back and Beyerdynamic DT 770 PRO closed back headphones being powered by the Liquid Spark amp. I'm currently running Roon on a 2023 Mac Mini with the M2 PRO chip. Tidal and uncompressed FLAC files on a NAS drive are my music sources (will eventually get a Roon Nucleus dedicated core device). The 200M decodes pretty much anything and everything I throw at it. I have to admit that it is fun to see the MQA and DSD sampling rate LED's light up on the front of the 200M! You can set the XLR and RCA outputs to a fixed volume setting for when you are using an external headphone amp or any other device that has a volume control. There are also filter settings to choose from, descriptions of what the different filters do is explained in the included documentation. I noticed that when an MQA file is being played the filter defaults to the Short Delay setting and cannot be manually changed using the Filter button. I honestly couldn't hear a big difference between the Fast and Slow settings. If you are using the pre-outputs in variable volume mode or if you are using the internal headphone amp the volume control on the 200M is really nice, it is the type that rotates continuously and it is smooth with just the right amount of resistance, it feels like a quality volume control. The DAC is very quiet and from what I can tell doesn't really impart any coloration of its own on the audio. It passes a very clean detailed signal to the external headphone amplifiers which is all you really need and want it to do. It basically just disappears. During my research of standalone headphone amps to use with the 200M I learned that there is a category of headphone amp called a "measurement chaser" meaning they are all about specs - ultra low noise floor, S/N Ratio, high dynamic range, and high output power especially from balanced outputs. The THX AAA 887 and the Schitt Magnius are two examples in that category. Both have a very detailed imaging and open sound staging and they are both very quiet, no background noise whatsoever. If you are hearing hiss or other audio anomalies then those sounds are on the recording. With both of these amps I felt like they revealed too much detail in the recording, meaning you can hear all the flaws of a bad recording. On the other hand, with excellent recordings the imaging and depth of the soundstage is amazing. I also felt that, as other professional reviewers have pointed out that these measurement chasing amps almost have to much power on their balanced outputs, I found that with most recordings I couldn't get past 11 o'clock on the volume controls before it was to loud which doesn't give you a lot of volume range to play with. This was especially true on the Schitt Magnius. Ultimately, I just didn't like the sound of the Magnius, to unforgiving and sterile sounding, and the Monoprice THX AAA 887's volume control developed a clicking distortion and this happened on the replacement unit they sent me as well so the AAA 887 got returned for store credit and I got the Monolith Liquid Spark. It has plenty of power to drive my two pairs of headphones mentioned above, it is also quiet - no background noise, it presents great imaging and the soundstage is decent, but it doesn't present audio with an attention to hyper detail, it's warmer, slightly more rounded overall which again makes it great for listening to a lot of different genres of music and for listening to recordings of varying quality. It's more fun to listen to with the 200M providing the level of detail you would expect from hi-res FLAC or MQA music files, and it has plenty of power with two gain settings to drive my Philips X3's and the 250 ohm Beyerdynamic's with a good range on the volume control. The volume control has a quality feel to it, rotates smoothly. Overall, if you are in the market for a DAC that does full hardware decoding of MQA files (and DSD) then you can't go wrong with the DAC Magic 200M and with it's pre amp outputs you can drive a pair of desktop powered speakers as well. Definitely recommended.

Pros: - Well constructed and visually appealing. - Might sound better than straight to PC. Volume knob is at least an improvement over my headset volume knob (and unequal stereo levels). Next step is to buy a better headset. Cons: - The DAC seems to go to sleep after around 30 minutes of disuse. This means that the audio will start coming out of a fallback device until the DAC is turned back on. - No microphone passthrough from the headset. - There is misleading documentation as to whether it supports bluetooth 4.2 or 5.0. It supports 4.2. - The bluetooth support is input only. I understood this before purchase, but it should be made more clear in the product page. - Only has one usb input and I have three computers without an optical output. This means either trying to find a converter or using an external kvm to the single usb input. I tried both. Ended up with some e-waste when trying both the spdif and coaxial converter options. The external KVM is working, but makes the source switcher unnecessary. I'm manually swapping my 3.5mm headset and bypassing the DAC for my third computer. Cambridge Audio should recommend peripheral devices that they've tested.

I have been into High Fidelity Sound for over 30 years now. I have a complete CARVER AUDIO system (4000t PreAmp, Two Silver Seven t 575 Watt Mono Block Amps, the Amazing Loud Speakers (ALS), a C1 PreAmp and a 400t Amp for Surround Sound Speakers, B&W CWM 650 Speakers for Surround Sound, and a Sony SACD Player). When SACD's first came out it was a huge leap in digital sound and sounded amazing on my system. I did not think anything would come close or surpass SACD's. Now decades later as Streaming Services became more mainstream, more reliable, and more easy to use I would take the plunge and purchase a DAC. I did a lot of research and found a great entry level DAC the Cambridge Audio DacMagic 200M. This DAC is a middle of the road DAC as far as price and functionality. Once I connected it and started using it I tried every Online Streaming Service available. I found (to my ears) the perfect combination. The DacMagic 200M using TIDAL as the Streaming Service was simply Amazing! The sound quality on my system using TIDAL and the DacMagic 200M can compete with SACD's and some tracks surpass SACD quality. The tonal quality of the (highs, mids, and lows) are shockingly accurate. If you are new to DAC's and Online Streaming Services you will not be disappointed with this DAC and TIDAL as a streaming service. The sound quality and ease of use is a beautiful thing. I hope this info helps.

This a quality DAC with excellent sound quality at its price. I connected it using usb cable to a desktop pc for sound and music. I would recommend to anyone interested in an external DAC under $1000.

Fantastic piece of gear very happy with it, pushes my Klipsche Forte’s nicely with amp, nice cheap dac

Una auténtica maravilla,no tengo palabras.

I've got DACs on my HiFi units and also had a DAC Magic 100 which I use on my PC. When I saw the announcement of the DacMagic 200M with MQA I was eager to buy it. In fact I checked Amazon every day during February until it showed as in stock. OK ir's expensive but it includes MQA streaming too which is a great reason to buy if you use Tidal.. And I have not been disappointed. Even on standard non-MQA streams the performance is fabulous. I can hear subtleties in music I have listened to for years and not heard before. Everything is brighter nad clearer. And MQA is another level. This really has increased my listening pleasure particularly as I work from home and can listen while I work. Normally I use headphones and a Dragonfly Azure for MQA but now I can use my speakers properly This really is an excellent piece of kit and I am very, very pleased with it (even as i type this I'm enjoying some fabulous sounds). You won't be disappointed if you invest in this.

Muy buen equipo el sonido es muy claro y preciso le doy un 10

I am not audiofile nut, but just pluggin it in and first song was just quite more alive, especially the dynamic between quiet and loud is better then expected. Also simple test how good this one is, there is no noise even amp on max and audio output on max from Canbridge as well... Not much else I can say... Thank you

Klanglich ist der Kopfhörerverstärker sehr gut. Er ist auch einfach zubedienen. Allerdings hat er keine Fernbedienung.