Tablet stand for bed, Adjustable Tablet Holder with 360 Degree Rotating&flexible Arm Compatible with iPad 2023,iPhone 15 Pro, Switch, Kindle,Samsung Tab,or Other 4.7~12.9 inch Devices

I have to admit, I was quite surprised by this product. I have an old iPad air 2 that I solely use for sticking YouTube on the fall asleep to. This iPad has spent its life in one of those metal "love mei" cases, which I think has helped it live as long as it has. After falling asleep and dropping this on myself a few times, I knew something had to be done. This is the third tablet holder that I have tried for this setup, and I can safely say that I am yet to have the iPad fall on my head. The build quality is sturdy, with additional thumb screws that let you add extra tension to joints. The numerous joints allow for the tablet to be angled in every direction I have needed while tossing and turning. But the biggest positive point - the tablet is held very securely, and is easily slipped in an out (enough space in the gripper to hold my tablet securely and leave room to get it out without having to force it). The only downside of the design is the main screw securing the base - I imagine they've designed this for thicker tables or surfaces. With this being attached to my headboard, and there not being enough space behind the bed for the screw; this has lead to some close calls with me not paying attention. A small price to pay in comparison to the ease of use, and grip it provides.

I've only just started using it but I have to say that this is far more impressive than the plasticky things I've had before. I've had two and they both broke despite careful handling. I use it for supporting an ipad in bed to read and have a page turner gadget. This one is far more solid and stable and the clamp is effective but not so tight. The best thing though is that it folds away into an upright position so I don't have to keep putting it on and taking it off. This wouldn't work if you sit up in bed though. So far it looks well-made and works great!

I bought this back in February nearly a year ago and I have used it every day since! It's so handy, I have my ipad attached to it most evenings, where I can use it to read, stream or play PS5 remotely in bed. I also have attached my switch to it and it really improves my posture so I'm not constantly looking down at a book / game etc. I also use a page turner so I can position my ipad so I can lie down and read! It did come off the bracket at one point but we have screwed it back together. I think its pretty sturdy for the price and certainly worth it for me. Will it last forever, not likely but fairly good at this price point. Down point for me is the lack of flexibility to move it anywhere else really, it is only really good to attach to the headboard, so I think I might need a different type for other places. It is a bit noisey and rigid as well so there are limitations to the positions and I would recommend oiling it!

This has been a game changer for me. Quality of life has been elevated since buying this. It's really sturdy and holds my samsung tablet really well. I've been using for a couple of months now and I absolutely love it. I'm watching Netflix in bed next to my sleeping husband. I have my sleep mask on connected via Bluetooth to my tablet so I can have it as loud as I need without disturbing him and I use a really long charging cable so I can manoeuvre it freely. It feels like I'm at the cinema but I can fall asleep freely. I also listen to relaxing sleeping sounds from my tablet whilst my phone charges. It has great manoeuvreability and holds everything in place as it should. I cannot recommended it enough. Great little bit of luxury and really easy to set up.

I bought this on the 9th August 2022 and it is genuinely one of my best purchase yet. I clamped it to my bed frame to watch videos in bed and it still holds without it slowly sinking from the weight. Definitely worth the price. The metal has slightly worn down from the amount of rotations but it hasn't ruined the overall performance. 10/10 recommended item for any room.

I love watching films and TV shows on my iPad in bed now! The arm itself is very adjustable, but I was somewhat restricted in where I could attach it due to the length of the screw. It’s not the most stable arm, either, as it shakes a lot with the smallest movements. I’m still glad I bought it, though and it was reasonably priced.

Delivered in time but did not knock at the door to make me aware the parcel had been delivered, thankfully the rain had stopped or my.parcel would have been damaged. The product works well, is sturdy, and if you have patience, is easy to install very quickly. I use it to watch movies in bed on the occasional night or when I need hands free for meetings online.

I was a bit dubious at first, thinkng that the arms wouldn't be able to support the weight of a tablet. They do. I had to really tighten up some of the nuts, and make a small modification to one pair of bars, but it mechanism holds up well. I can position it as I want and it stays.

Updated December 2023: 1st unit still holding up as good as the day it was bought. I Just bought a 2nd unit for my home, for all the original reasons stated below in the original review. These tablet arms are incredibly handy and useful, I found myself constantly moving mine around to different rooms where I needed it. Decided to buy a 2nd one (I'll probably buy a few more yet eventually). Bought this for holding an Amazon Fire HD8 Tablet and a portable 13" secondary flatpanel monitor screen holder. The product is EXACTLY as the promo images display. This review might be a bit on the long side however i'll cover several uses i've found to be really handy that nobody sofar has mentioned in their reviews. I'm very impressed by the build quality All metal frame, springs and bolts, including the whole bracket clamp. Only non metal parts are the plastic knobs ends on the tension-bolts, the spring loaded tablet clamp grip assembly, and tightening nut at the back of that clamp grip assembly, and silicon pad on the bracket clamps themselves as to not damage or leave marks the finish on any choice of furniture you chose to mount the base on, whether it be it a bedside night stand, headboard, coffee table, countertop, table, glass top table or glass-top coffee table or wall shelf; or just about anywhere else you can think of. The base bracket clamp has 2 socket mounting options to clamp onto - horizontally (ie: table ledge) or vertically (ie: headboard), and the clamp has a full minimum 1/4" to 3" maximum clearance to accommodate some very thin (glass top coffee table) and thick mounting applications like a headboard. The tablet stand is very sturdy, while priced affordably. The Tablet stand has 6 tension-bolts: - one for the clamp plate adjustment screw, a good sized thick round knob with 5 deep finger sized indentations that allow you to firmly grip and tighten the clamp to the surface/ledge/etc spot you have chosen. It doesn't matter if you have small or large hands, thin or thick fingers, or wearing gloves, you'd have no problem or issue getting a solid grip on this knob. - one on the base clamp bracket with 2 holes - one for each orientation which will secure the tablet stand, preventing from swinging to either side if you prefer or require a "fixed" placement of the arm. - three on the remaining arm hinge joints (base, middle end), which lock the 2 arm sections in the position you want them - one on at the very end that connects the end of the tablet arm with the 2 sets of short metal rods, with one of the rods ending in a ball-joint to the backplate of the tablet gripper assembly. The tablet arm comes neatly folded inside a small box, with a easy to understand set of instructions, Assembly is very minimal, and that covers both the horizontal or vertical orientation of the base bracket clamp, and the attachment of the spring loaded tablet gripper holder assembly - which is a plastic nut and a ball-joint / ball-joint socket. Setup of the tablet arm is very simple, once choosing an adequate spot/surface/ledge to tighten the base clamp onto attaching that tablet gripper assembly and inserting the tablet arm into the rod, it's merely a matter of positioning the tablet arm and tightening those tension knobs, and lastly your tablet or display device between the pair of padded grip holders. As advertised, the spring loaded tablet clamps will accommodate devices within 5 3/8" to 11" size, as the clamps extend just a little past 11". - Both clamps measure at 2 5/8" wide across. - The rubber padded lip has a full 5/8" of depth for gripping onto whatever phone, tablet or screen that will fit within the 5 3/8" to 11" measurement. - Both top and bottom lips are slotted across inside to accommodate most usb charge cables and headphone cables, The slot measures about 1 3/4" wide by 3/8" deep, should the device your using (a phone or tablet) require charging; and/or should you want to plug in your headphones - The springs in those clamps have a considerable amount of tension 'clamping force' that will keep your device/tablet/screen securely in place if it gets accidentally bumped. Testing and using the tablet arm, I use this tablet arm with 5 different devices, in several different setups: 2 brands / sizes of smart phones, one of them being 'phablet' in size with a 6" screen, both phones with protective cases on. I found removing the cases was unnecessary. The phones are held in the typical portrait mode, and the usb cables I have on hand, do have enough clearance through the inner lip slot, and also able to comfortably fit 3.5mm headphone cable as well. Amazon Fire tablet HD8, in both portrait and landscape modes, the spring loaded grips extend wide enough to hold the HD8 on both long or short edges (8 1/8" x 5 5/8"), and the spring tension has enough to hold the tablet snug and firm, even while the tablet is within its case. Alternative Pc / Laptop display mount: For people who use their laptops while laying down in bed and get tired of constantly bending their neck down to look at the screen, I tested a 15" portable monitor (Amazon has a bunch in the store here - just search for 'portable monitor' ), the only caveat here is you'd need to have a hdmi + power cable extension or single usb cable long enough to reach said computer / laptop / video source and use zip-ties to fasten the cables neatly along the length of the arm to keep things tidy. That being said, this Tablet Stand is a very unique and convenient solution, allowing the person to comfortably lay back in bed and keeping their neck in a more neutral posture position. No more sore necks, and your neck will thank you. Alternatively, this Tablet Stand works great clamped to the side of the computer desk or livingroom end table to mount a portable 15" monitor for use as a secondary or third display screen when desk space / workpace is cramped, limited or simply unable to fit an extra display screen. A person could buy and use 2 of these and have a 3 monitor display spread on a desk/workspace that's only big enough for a single monitor or laptop. I've tried this and it works wonderfully in my livingroom - sitting at the end of the sofa or in the arm-chair with an end table off to the side, I'm able to use the laptop with a second screen, and have the second screen positioned exactly where I want / need it. This is also true when needing a third arm and spare hand to hold your cell phone or tablet while working in tandem with your laptop. Its a great hands-free device holder and mount. I also have a 2-in-1 convertible 11.6" sized chromebook (brand unimportant, 11.6" is a common chromebook size), that has a touch-screen and the screen lid folds a full 180 degrees to the other side / backside of the keyboard converting from laptop to 'tablet mode' . The outer dimensions of the chromebook is 8 1/8" x 11 3/4", and the tablet arm grippers does accommodate the 8 1/8" 'landscape' orientation without issue. There's enough 'lip' on those grippers, and this tablet arm is rated for up to 1500grams (1.5kg / 3.3lb), which is within the weight of the chromebook i have. The Chromebook is arguably the heaviest of the devices I tried, and once those tension knobs are tightened, there's only a slightest bit of jiggle/wobble if tapping the screen with your finger using one of those android screen styluses. The ball-joint socket at the back of the tablet gripper assembly is also quite sturdy, I'm able to tighten the nut enough so that the gripper plate is stiff and holds the position you set it to, wile at the same time still able to tilt / adjust whichever device I'm using to a comfortable viewing angle.

Struggling with this product since i received it. Does not secure the tablet enough and wobbles all the time. How to return it??

Tengo un Smartphone rugerizado no apto para las dimensiones de este dispositivo ya que tiene un grosor de 18 mm pero aun así lo sujeta bien aunque por lo mismo, no puedo conectar su cable de carga, tambien sujeta muy bien una Nintendo switch sin los joycon

Perfekt att ha vid sängen. När man vill se film på sin Ipad

I've only been using it for about a week but I think this product is great. I read a lot of the "so-so" and negative reviews before purchasing this product.... which made me concerned that this product would sag or not be as flexible as advertised .... but so far so good. It doesn't sag at any joint and it is very flexible. I like to read in bed so I've only used it with my 7" Kindle so far. Soon I will try it out with my larger iPad Pro....but I must admit that I'm hesitant to do so ... because some negative reviews said the "clamp" that holds your device ..(or the ball socket clip) ... broke when they were extracting or inserting their devices. The clamps that hold the devices are taunt but they don't seem flimsy enough to break easily. I'll update my review after I give it a complete workout. P.S. It is easy to insert this devise up-side-down which will prevent it from having much flexibility. Make sure you carefully and closely look at the provided illustrations which show the correct orientation. ***UPDATE Sept.30,23 I have been using this Bed-Tablet Stand with my Kindle and iPad Pro for quite a while now. (I think it's been close to two years.) I think it's fantastic!!!! But, It does have a couple of issues you should know about. 1. You MUST have a head-board that it can clamp onto "from above".... or something sturdy that it can clamp onto "from above". I do not have the correct type of head board, but I do have cabinet doors (built into my headboard) which allowed me to clamp this device onto the "top part" of a cabinet door. Some guy posted pictures (here) showing how he screwed-in a piece of wood onto his headboard to create a "lip" for this device ....(which I thought was a great idea). I have had no issues using it with my Kindle.... but, after about 6 months of switching back-&-forth, from my Kindle to my iPad Pro (10.5 inch), the "ball socket clip" did start to slip, causing my iPad Pro to flop-down. However, ..... I fixed this problem. My iPad Pro has a "back protection cover"... so by purchasing a teeny-tiny bungee cord and wrapping it around the "ball socket" area and then hooking it onto the iPad Pro's back protection cover, the problem was instantly solved. The tiny bungee cord has just the right amount of "stretch" so you can still position the iPad anyway you desire and it will not sag. Yes, it would be great if this company could design the ball socket to stop drooping with iPad Pro's ... but this device doesn't "jiggle or vibrate" at all ... which seems to be the #1. complaint about all other similar products. P.S. .... it is FANTASTIC watching TV on an iPad Pro that is able to hover over your face.... and the same can be said for reading on your Kindle.