Ibywind 2 Pack Screen Protector For Xiaomi Poco F3/Redmi K40/K40 Pro 5G 6.43",9H Hardness Tempered Glass,With 1Pc Camera Lens Protector,1Pc Back Carbon Fiber Film,Easy to Install

I fitted my new screen protector yesterday, and I can't fault it, fits perfectly, even if it doesn't fit inside the installation tool brilliantly, there's no overlap ok the edges of the screen, it's sat slap bang in the middle, and is doing as intended. On the plus side, it also came with a rear camera metal screen/glass protector, and a textured rear protection too (only the one) which I applied, as my phone lives inside a silicone case, so extra protection is a bonus in my eyes. If and when time comes and I need another screen protector, I'll definitely be buying this one again.

First time I've actually fitted a screen protector and because of the frame that comes with it, it actually makes it so easy to position. I just followed the instructions washed the screen with the wet wipe, dried with the dry wipe the sat the frame over lined the screen protector up top first due to the camera cut out then let it down slowly so it sat within the lip of the frame and a few seconds later all the air had dissipated. As for the quality, my poco f3 works no different to how it did before as in touch response and also doesn't affect the cases I use either, so I'm really happy with the product.

Edit... A month on still pretty happy. The first screen did crack pretty easy. I'm not even sure when. However, better a £9 screen protector, than the actual screen. Which is why it's bought in the first place presumably. Second screen also went on without a hitch. No bubbles in the centre or around the edge. V happy. With care, patience and attention to detail when fitting, this protector looks immaculate. Helped by the frame (I didn't use the back film or camera part as I wanted to keep the white look of the phone). The pre-installed film protector was better than nothing but not great. Covered in fingermarks almost instantaneously. Curiously this protector repels them keeping the smartphone looking... smart.

This is the first time I've installed a screen protector via a fitting frame. It makes the whole process so easy, that I'll never buy a protector without a frame again. This is the first time ever I've not wasted my first and second protectors doing a trial fitting run. I just dropped the glass into the frame and it was just perfectly aligned. Be aware that the POCO F3 has a factory fitted plastic film screen protector that needs to be peeled off before fitting this glass protector. The glass is ideally sized and has a slight gap at the edge of the screen to allow the POCO provided clear bumper case to fit. I have the white F3 and didn't fit the fake carbon back glass protector as I'm using the POCO clear bumper case and I love the pearloid finish and didn't want to hide it. I decided not to fit the black metal lens protector, again because it spoils the aesthetics of the phone, although it will be fine for the blue and black phones. I will buy another kit with a glass lens protector and use that. I bought this product specifically because it had the fitting frame and boy I'm glad I did.

Perfect protector comes with everything for perfect installation. Bo bubbles, no white strips along sides and they fixed the punch hole front camera. So no empty part above the front camer, as shown in pictues, unlike the previous version of this which was mentioned and shown byother users. However, there are no glass protectors for the camera. Only a black sticky bump to put around the rear camera to provide a little bit of space between the lens glass and the surface you put the phone on. Nice feel and smooth touch response together with complete coverage around the display.

I didn't like the skin protected but screen protector is great

This was the easiest screen protector I have fitted. The Guide that is provided is excellent and the instructions and cleaning cloths etc worked very well. The glass screen feels really high quality. The pack comes with two sets so if you do muck up the first one there is a second chance! I think its very good value.

Easy to fit with template provided Clear instructions and replaced mine and my wife's with the 2 screens provided. No bubbles on screen and feels much better than original protector

This is by far the easiest and most complete screen protector kit I have ever bought. The obvious advantage is the frame that comes with the kit, it helps align the screen protector perfectly and the result really is perfect, the alignment is 100% symmetrical! Besides aiding in the correct alignment it also helps the screen protector to adhere without air bubbles forming. As you lift up the frame surrounding the screen protector it drops flat on the phone causing the air underneath to evenly dissipate towards the edges. Simply brilliant! Besides the 2 screen protectors and the frame the kit also includes, 2 alcohol wipes, 2 cloth screen cleaners, 2 sticky screen cleaners (for dust particles) and a tiny bottle of vegetable oil to help move out any air trapped along the edges. To call this kit complete is an understatement! The feeling of the glass is just like a regular gorilla glass screen, it doesn't cause any additional friction and has no effect on the registration of input. You wouldn't notice it's on if you didn't actually know. The "anti fingerprint" statement should be taken with a grain of salt, but than again, that is the case with all screen(s) (protectors). Honestly, I can't recommend this product enough. I've dabbled in screen protectors a few times in the past and never have I had a perfectly neat result. But with this one I have!

Nöjd.

Direi un buon prodotto di facile applicazione, a prova di incompetente.

hat mein Smartphone schon mehrfach und sehr effektiv gerettet, selbst wenn das Panzerglas komplett zerbrochen und rissig war, war das Originaldisplay darunter komplett unbeschadet und ohne auch nur einen Kratzer. Das Glas ist nicht zu schwer und steht nicht zu hoch ab. Passt ziemlich gut, deckt das gesamte Display sehr gut ab, spart die Front-Cam aus, aber nicht zu weitflächig. Lässt sich gut und recht zügig und blasenfrei anbringen, der mitgelieferte Rahmen vereinfacht es noch mehr. Das Set enthält auch sonst alles, was zum Reinigen und Anbringen benötigt wird und das gleich mehrfach (Staubsticker, Feuchtigkeitstuch, sogar Microfasertücher) Beim Zerbrechen bleiben die Splitter an ihrem Platz, verteilen sich nicht über den ganzen Boden und verursachen keine Verletzungsgefahr (wenn man später beim Abnehmen vorsichtig ist), zerkratzen auch nicht durch ihre Kanten das Display darunter. Übersteht viele moderate Stürze ohne zu zerbrechen oder zu zerkratzen (mir ist es durch Bodenkontakt noch nicht zerbrochen, selbst bei Pflastersteinen oder Marmor etc, nur durch direkte Aufpralle auf ggf. scharfkantige Metallteile im Fall). Die Haptik und Gesten/Touch funktionieren durch das Schutzglas immer noch tadellos (ggf. Empfindlichkeit nachjustieren, geht bei mir aber auch ohne). Manche billigere Stylus könnten aber ggf. etwas Probleme haben (bei mir ging einer damit nicht so gut, ein anderer aber problemlos, beide eher kostengünstig). Würde es nie wieder missen wollen. Ist den Aufpreis im Vergleich zur dünnsten Billigstfolie absolut mehr als wert (zumal die Packung zwei Stück auf Vorrat enthält (beim Zerbrechen muss man also erstmal keine Folie nachkaufen oder auf deren Lieferung warten, sondern kann gleich die neue anbringen) und den Kameraschutz noch dazu). Einziges Manko: Der Schutz für die Kamera auf der Rückseite ist Geschmackssache: effektiv und absolut passgenau, aber steht sehr weit ab - dadurch liegt das Phone auf einmal nicht mehr richtig flach auf der Unterlage an, fängt an ständig zu kippeln. Das kann nerven. Oder ggf. passt dann auch das Handycover nicht mehr richtig darüber. Muss man aber auch nicht unbedingt anbringen, wenn man nicht will.

Durable and easy to install