PCCO90X

Review after my first workout: 5/5: Value Sold and shipped by Amazon. Bought it during a Daily deal special. 4.5/5: Quality - Overall, seems well-made, and the tubing is thick. - Pulleys are very smooth. Ball bearings in there! - Cables (two) seem high quality - Cons: 1)What I wasn't initially thrilled with was the fact that the weight carriages slide up and down the square vertical tubes on plastic bushings/shoulders. The key is to USE THE SILICON spray that comes with the set. The instructions never mentioned where to actually use the silicon, so take my recommendation and put it all over the vertical tubes and inside the square bushings. Makes a world of improvement! And the spray is sticky, so it doesn't run everywhere. A+ on Powerline including that (and touchup paint! who does that?? A+) ! 2) Get a carpenters square and be sure the vertical tubes are square to the horizontal top tube. The instructions don't mention to check this. Helps to make everything stable and sit flat on the floor. Before installing the top inside corner pulleys, put the square up inside the corner (where the pulley normally would be) as you tighten the bolts. 4/5 Assembly: I didn't really have any difficulties - just some minor things that could be clarified. Assembled everything myself with no help. My instructions included helpful diagrams, but in reading some reviews from several years ago, it appears they used to only have diagrams. I love it so far! I have a full Olympic weight set, so I can load it up. Note that the tubes which hold the weight plates are the small diameter size, but my bigger plates don't seem to rattle around. Use your imagination, and you number of workouts at your disposal is incredible. UPDATE Feb. 2015 I've used this system for over a year now and wanted to give an update. 1. No issues or defects. The machine still works perfectly and nothing has broken. I do occasionally reapply the included silicon spray to the vertical supports. 2. Think outside of the box! If your workout routines have gotten stale, don't be afraid to try new ideas. This equipment lets you do just that. However, you may want to purchase additional cable attachment handles, such as a double D/triangle grip and lat pull-down bar. Also, a stand-alone bench with adjustable incline/decline increases the number of possible exercises even more!

The machine itself seems to be working well. There is no stickiness whatsoever with the up/down movement like some others have mentioned. I suspect some of them may have put the plastic pieces on wrong that go inside the part that the weights sit on and that ride over the vertical metal piece to act as a barrier for it to slide up-and-down when pulled by the cables. There are holes in the tube that they go in that line up with a part of the plastic piece designed to fit in them. If you put the plastic inserts in the wrong direction then they will either not fit over top when you try to slide them over this piece, or if you do get them over they will be too tight and have a slightly "sticky" feeling when pulling up-and-down. The included garage door lube it came with helps make it a smooth ride as well. Either way, it's important to keep it all lubricated. It came with one wrong bolt too so I had to use an old one from a car shock absorber. If it wasn't for the annoying directions and wrong part I would give this a 5. I will update if anything changes while using

Update 12/31/19: Still going strong. This really transformed my basement workouts. One of my best fitness purchases ever. ***Original Review*** So far so good... Been using for about 2 weeks. Solid build in a mostly compact package. For those saying assembly instructions lack--body solid must have fixed that issue. Pretty explicit instructions included with mine. I had no issues assembling my crossover machine. I have the plastic guides installed in mine and the weight carriages have no issues moving freely. The were a little sticky at first, but the lube fixed that with no issue. Glides like a commercial unit now. Max weight I've had on one side so far is 300lbs and didn't seem to have any issue. I would suggest using clips for exercises that take you away from the centerline of the machine (i.e. Lower/upper chest crossover). I've found this makes the weights "rattle" a bit and they can slide off the posts. No issue once I out clips on. Weight ratio is essentially 1:2. If you properly evaluate this pulley system, the math tells you so. It's not 1:1 or 1:3 like some people have said. So essentially for every pound you load on there you're getting .5lbs of tension requirement. Includes handles are a little goofy. They work just fine but I'm used to the compact D-handle style so I purchased additional handles. Also added on the straight bicep bar, triceps v-bar and tricep rope. Then added close grip pulldown handles and wide lat bar. All have been useful with this machine (depending on weight-rep ratio of your workout...it's tough to go heavy on lat pulldowns as you don't have anything to hold your legs down). I did a ton of research and mulled this decision over for two weeks before purchasing...but I'm glad I did. All the workouts I was trying to accomplish at home using bands are now being executed in an almost commerial-gym-type manner. Its worth the money and worth the 1 hour of assembly time. Also noted the listed dimensions are dead on: my drop ceiling clearance was 85" and this just sneaks in perfectly.

I was looking to upgrade from my “single arm” cable machine. I wanted the ability to do a true cable crossover (among other exercises), and because of how quickly I like to move through supersets, I was tired of messing with plates, so I wanted a weight stack. I did some research and settled on this Body Solid model; it had what I was looking for at a great price. Sure I would have liked 2 weight stacks, but that adds a few hundy onto the price. Assembly: overall not bad. All the hardware came in one huge bag which is a bit annoying to have to sort them all out. Also the assembly video calls out hardware needed for steps even if you’ve installed that hardware already, so be aware of that. It took me about 3 hours from box to bicep curls. Not a single part was missing and they even included a little bottle of paint for touch ups. Quality: I’d say it’s what you would expect for this price point. It’s not perfect, but it fit together pretty good, it looks nice, and it works. It was also packaged very nicely and they clearly took care to make sure everything was going to arrive damage free. The weight plates are concrete or something coated in plastic so they’re huge compared to steel plates, but whatever, weight is weight I guess. Functionality: for reference I’m 6’1” 210lbs. I’m quite pleased with this machine. It’s smooth and quiet. Even 1-2 plates for side laterals operates very smoothly. Range of motion is good, not great. Trying to do double arm lateral raises by grabbing the handles on the opposite side with each arm will bottom it out, but you can buy 12” extension cables for a few bucks to fix that. Cable crossovers at all angles work great. The weight stack provides pretty good resistance, I’d say it tops out around 120-130 lbs using both cables. I also bought a little plate holder that I can slide into the weight stack and load up with 1” plates, so I should be fine for the foreseeable future; I don’t typically lift that heavy anyways. Overall, I feel that this was a great purchase. It will allow me to get pretty much any workout I want done at home (combined with my 90lb power blocks). I’m excited at all the new lifts I can do with this thing, and being excited about working out is 80% of the battle.

My home gym has some real constraints on space (it's in the basement of my 1947 ranch home), with low ceilings, duct work, a narrow room. So, when I was looking for a cable machine, that was a major factor. Also, since I'm a working stiff, price was a concern. This Powerline cable crossover really fit the bill. I was initially concerned that it would be on the flimsy side, but previous reviews were encouraging, so I went for it. If this is your concern as well, don't worry: It feels like commercial gym quality. Super-sturdy, stable and smooth operation; this is an incredible value. I purchased a refurbished one at a great price (Fitness Factory on Amazon - two-hundred, ninety-nine dollars). Would I rather have weight stacks and not worry about loading plates? Sure. Is it worth another thousand dollars to me? No. Were there clear directions? No. (I might try to put together some for others.) But, the parts list and exploded diagram are adequate for assembly. Here's a couple hints: assemble the weight trollys that ride the uprights first and don't put on the pulley wheels until the cable is in place (final step for completing upright assembly). I put it together myself (an assistant would be handy) over the course of two evenings (probably ~2.5 hours total). Totally worth taking your time. It does not come with olympic weight adapters.

I bought this for two reasons it's a heck of a lot cheaper then ANY other cable cross over machine, and I devised a way that I could hook up the PCCO90X up to my bowflex so i could use real weight instead if the resistance rods. Others have mentioned that the instructions are not very clear, they are just an exploded drawing of the PCCO90X with poorly labeled markings. my advice to you organize your parts and label them. Then start construction from the ground up. It is not a complicated machine, and anyone who has built anything before in their lifetime should not have any real difficulty. Pros: a large variety of exercises can be preformed to work most muscle groups plenty of add-ons to make a versatile work out machine very stable machine when used from correct angles cables are rated to support up to 360# on each side using cables to work out will work stabilizer muscles that most other machines won't work. basically that means more real world strength faster Cons: parts are made in china, and the paint that comes for touch ups appears to be lead based so don't lick the machine. when the lower cable is pulled horizontally it will pull the legs of the PCCO90X in so that the machine will look like a trapezoid I saw this at about 120# being pulled upwards at a 35 deg angle I added and L brace near to the corner braces at the top to prevent it from happening it has held up to 160# per side Due to how the pulley system works you will lose about 40% (38.46% according to my measurements) of the weight that is actually put on to the machine. so you put 100# on it you are only actually lifting 60# does not come with weight so be prepared to buy them standard iron weights will run about 1USD per pound (if you shop smartly.) I had 100# of standard weights already but I needed to buy and additional 120# and I will need to buy some more soon Summary: All that being said, I have seen some great improvements in my performance at the gym as real weight gives much more even resistance the the power rods that I had perviously used. I was able to make modifications to the machine to make it more versatile and stable. With this machine my home gym is now complete and I can do almost any exercise in my house that I can do at my gym. I now only go to the gym for the social aspect of it.

*PLEASE READ in its entirety. I provide great information to inform you* :::SHIPPING::: I have Prime shipping. I ordered it on a Friday and received two boxes on the following Wednesday and the third box on Thursday. All boxes were in excellent condition as well as all the pieces inside. So when the UPS person brings you the first two boxes just let the driver know that a third box must arrive the following day (they are labled 1 of 3, 2 of 3, 3 of 3). :::ASSEMBLY::: -Manual for assembly: to download it just google "Powerline Cable Crossover Machine PCCO90X manual" and you'll get the PDF. It comes with the equipment but I recommend that while you wait that you read the entire manual so that when your product arrives you are already familiar with the pieces and steps. The way the instructions are written takes a bit of time to get used to but once you get used to it the instructions will be very clear to you. -Don't worry that the manual is long and that there are lots of instructions. Once you read them once or twice and see the parts for yourself you'll see that assembly is very easy. -If you're buying this also for triceps and biceps, then I recommend: Champion Cable Attachment Package Pack . I got them and they are of excellent quality and love them! -No tool is provided. But I assembled the entire thing with just my hands. After all is assembled you need a Socket Wrench to tighten up the 14 lock nuts that hold the whole thing together and six more (one for each pully). -After I assembled the whole thing and saw the complete product with my own eyes I am not impressed with the quality of the product, especially with the cables - they are made of plastic and look cheap. The whole thing looks cheap. This product sells on Amazon for $409 (+$36 tax) now on 5/4/2013, so it must have cost the manufacturing company about $120 at most to make. That's right. This product cost them ~$120 to make, and they sell it for $409. This applies to every product ever made by any company (cars, computers, etc.). This is how business works. So now you know that you are in fact getting a cheap piece of equipment. I took a couple business and economics classes in college so take my word for it. Low manufacturing cost and big profit is what drives business. But the equipment looks nice and I love it! -Assembly was very easy and even if the instructions are only ~90% clear, the other 10% can be figured out by common sense. -Whenever you install a pully holder or mid pully holder during assembly, do not tighten up the lock nuts because at the very end of assembly (Steps 5A-C) you'll be inserting and routing the cables so the pullies will have to be taken out real quick to do that (very easy). -Step 2B: you'll need a wrench extension for those two lock nuts. If you don't have it then they won't fall of until maybe an hour of exercise. -The leg attachment (thing that wraps around leg) is actually pretty good. The thing looks very cheap and it looks like it won't work but when I tried it, it actually worked really well! I tried it for the hamstrings and quads and it worked! -Step 2D: IMPORTANT - here the instructions forgot to mention to first apply silicon spray on the Vertical Frames BEFORE attempting to slide down the assembled Weight Frame. So do not forget to do this! Otherwise you'll have to literally hammer it down to slide! That's what I did until I realized I needed to apply silicon spray... It was so frustrating and I even thought I must have gotten defective parts (wrong size)! So I have warned you of step 2D. -IMPORTANT: After you finish assembly and you test the product you'll notice that it is not smooth at all and that the Weight Frames simply stick to the vertical frames and don't go down. This just means that you have to apply silicon spray but only on your personal "range" of the vertical frames that the weight frames will use. After the silicon spray, they'll be extremely smooth! This step is also NOT on the instructions but it's common sense. -99% of the assembly can be done by one person. The only exception is step 3A-3B - here's where you attach the long cross beam to the two tall vertical frames. -Took me a couple hours to do the entire assembly since the instructions were not worded well and it was my first time with this product. Now that I've done it once, if I had to do it again it would take me maybe ~30 minutes. -I also own PowerLine PPR200X Power Rack (for squats and safe bench pressing) from this company and I tell you from experience that if you are not careful when you put the weight plates on the holding bars that the paint will come off. With the power rack I just put strong tape on the bars to prevent this so you can either always be extremely careful or just wrap strong tape around the bars to prevent paint from falling off when you take out the weight plates over time. This product does come with a tiny bottle of paint in case you need to re-paint it a bit. -This piece of equipment is fully stable and sturdy after all bolts have been tightened up AND the two bases are properly wide apart. If they are not enough apart then the equipment won't be sturdy so distance is important here! -My non-olympic weight plates fit perfectly. -It came with two crossover handles (they feel very comfortable). -If you do decide to get the Champion Cable Attachment Package Pack, then I highly recommend getting two extra links (at any local store near where you live) or on Amazon: 100mm x 10mm Zinc-Galvanized Steel Carabiner Snap Link Hook - 3-3/4" x 3/8" (weight limit of each 100mm link = 500lbs, total = $7.38 including shipping for two) because this way you can leave four of the five attachments connected to the equipment at all times and the other can just be left hanging on it too. Or else with just the two links that come with this equipment you'll have the three attachments left unattached which can be VERY annoying. -Lat exercises should also technically be possible with this if the attachment is bought and you use your own chair, and even rowing is also technically doable with this equipment. :::WORKOUT::: Very smooth! It is a pleasure to finally own my own! I tried cable crossovers, triceps pull-downs, bicep curls, and leg extensions (for hamstrings and quads).

I've had this for a year now, overall very satisfied with it. I use it every 2 or 3 days for 30-60 minutes each time...non-stop succession of a variety of exercises, I run through somewhere around 20 different exercises. Very smooth movement...gym quality feel. **This equipment is not for 'getting huge', but it will definitely build muscle. It's for increasing strength and tone, through a huge variety of exercises, in your home...it's excellent for that. Small footprint, and not too tall for a normal room. A lot of functional trainers and cable crossovers are too tall for a normal ceiling height, which is another reason I opted for this model. The weights can get a little light for some movements after a while -- I just slow down and increase the reps. It's all about time on the muscle. Assembly was very straight forward, a little time consuming, but nothing mechanically challenging. *tip: don't over tighten the pulleys or you'll create drag/friction...they need to spin freely* Delivery was quick, no damaged or missing parts. I ordered a couple of extra accessories (a triceps rope, a straight bar, and a bent bar), to bump up my exercise options. With the adjustable post locations, and a couple of accessories, there are plenty of exercises to change up your workouts. As far as maintenance, just have to occasionally lube the pulleys, which are all exposed and easy to get to. After a year, the cables are in solid shape, no issues. Only thing I've had to do besides the pulleys is tighten some slack in the cables, which stretched a little bit after the first couple of weeks. Bottom line, this is an excellent, very affordable, home-sized piece of equipment, smooth movement, with a huge number of exercises, and plenty of resistance to gain/maintain strength, and tone. People reviewing negatively complaining about the weights not being heavy enough should not have bought this model in the first place. My experience with the purchase/shipment, etc., was very good. Definitely recommend this functional trainer.

Attrezzo fantastico, ha una solidità sorprendente e da una buona senzazione anche sulla durabilità che potrà avere, il montaggio è davvero semplice (nonostante le istruzioni only english) nelle scatole era presente un lubrificante siliconico (apprantemente migliore del wd 40 per questo scopo) che uso sulla barra cromata su cui scorre il "reggi pesi" mentre per bulloni e pulegge ho usato un grasso normalissimo. Per ora non si è reso minimamente necessario zavorrate le basi come credevo inizialmente tutti i test fatti sulla solidità hanno dato risultati più che positivi. Lo consiglio vivamente, l unico neo di questo attrezzo è il prezzo che comunque è molto buono se comparato a macchinari di un livello simile.

Received 3 weeks earlier than scheduled. Pretty easy assembly. Very sturdy and cable motion is very smooth. Building home gym after decades at a gym and this was the perfect addition. Highly recommended- you can perform so many exercises with this machine.

Nachdem ich die Maschine für einige Zeit genutzt hatte, bemerkte ich, dass sie anfing zu rosten. Dies war enttäuschend, da ich erwartet hatte, dass das Gerät langlebig und korrosionsbeständig ist. Der Rost beeinträchtigte nicht nur die Ästhetik, sondern auch die Funktionalität des Kabelzugturms. Zusätzlich zur Rostproblematik stellte ich auch fest, dass die allgemeine Qualität und Verarbeitung des Geräts nicht zufriedenstellend waren. Es gab Unregelmäßigkeiten und Schwächen an einigen Stellen, die Zweifel an der Haltbarkeit aufkommen ließen. Dies minderte mein Vertrauen in die Stabilität und Sicherheit des Geräts während des Trainings. Aufgrund dieser Erfahrungen kann ich die Body-Solid GCCO-112X Cable-Crossover Maschine Kabelzugturm nicht empfehlen. Die Probleme mit dem schnellen Rosten und der mangelhaften Qualität sind enttäuschend und lassen Zweifel an der Langlebigkeit des Geräts aufkommen. Bei der Auswahl einer Kabelzugmaschine sollte man nach robusten und qualitativ hochwertigen Alternativen Ausschau halten.

Anyone that has the space for one of these in their gym should get one. It transformed my training. It doesn't actually take up much space, its just quite high. The only gripe would be it is a shame there is not a setting for the cables to be used from the middle of the machine, only the top and bottom. But even so, the value for money is brilliant. So many exercises can be done with this thing, Best piece of gym kit I ever bought. Easier to construct with two people. About 2 hours. approx.

Good one for home gym