ELEGOO ABS-Like Plant-Based 3D Printer Resin with Low Odor and High Precision, 405nm UV Resin, and Quick Curing for Mars Saturn Jupiter MSLA DLP LCD 3D Printing - Clear Green 1000g

Tough and strong. Great for minis

I still detect odor, and I still get a reaction when I inhale or when it comes in contact with my skin. Maybe I'm just more sensitive to this kind of stuff than most though. It definitely is less of a reaction for me though. I would still recommend proper ventilation, a mask with a charcoal filter, and gloves. I found that 3 second cure time caused the "cones of calibration v3" to fail. I had to bump it up to between 3.3 and 3.7 seconds at 25 degrees C to get a passing result. That's just to say you will need to bump up cure time slightly from what you're used to if you're switching from a standard resin. I left initial layers at 30 seconds without issue there.

I’ve pulled ~50 D&D miniatures made with this stuff at this point, and I have to say I love it. The fact that it is plant based is the main selling point for me as it’s a bit kinder to the environment, but the low smell factor is what kept me coming back. Resin printing stinks and I used to have to abandon the room next door to my printer when it was going, but after switching to this resin I barely smell anything standing right outside the door. The only cons are that it requires a bit more exposure time than the standard resin, and it is a bit brittle once it goes through final cure. This can be solved by mixing a bit of standard resin in, but I rarely do that.

I really want to like eco-resin. It requires very steady print room temperatures and slight overcooking. On my Mars 2 Pro I have to expose a whole extra second over my ideal callibrated exposer time or else I might get print errors. And even then, sometimes you’ll just get errors. It’s fussy. That aside, two of the three bottles I ordered had broken caps leading to leaks. The bottle design is flawed. The cap can be tightened down and the stem is longer so over-tightening leads to the stem shattering through the top of the cap. The good thing is, the packaging was good so nothing leaked out and even then the cracks didn’t leak out too much resin. In other words, even with the leaky caps I still got most of the resin out of the bottle. I hope the manufacturer fixes this bottle problem and updates their details page. I’m under the impression that this is the company that’s making and packaging resin for the Elegoo as well. Happy printing gang.

EDIT: elegoo customer support contacted me and it turns out it must have been a bad batch of resin. They shipped me a new bottle. I used rhe same settings as before for a test print and BAM... the test was a success. I then set it to print a few models and rhey came out great.. thank you elegoo!! i tried different settings for DAYS. i got 1 solid print, but it was in a group of 4. once i swapped to a photopolymer resin all the prints came out great.

We've had a great experience with this product. It is not overly smelly, and once dialed in it prints fantastically on my Mars 3 pro. I've found the trick with this resin is to use longer base cure times. Additionally, it doesn't yellow, which is great since when I first started printing I was curing miniatures for 15-20 minutes at a time. So far, it's been my favorite resin to use.

This is my new favorite resin. It does take a bit more exposure time then standard resin but the results are awesome. Excellent build plate adhesion the overall strength of this is amazing. It has a lot of give when bent. Not brittle like other 3D resins I have been using. The only issue I have with this resin is it’s a little on the smelly side.

Pungent odor, refuses to stick to the bed, and extremely troublesome to clean up (probably doesn't help with it being so viscous). Got this free with my Mars 5 Ultra; but I still feel ripped off.

Great product. Most common complaint I see is adhesion. Make sure you test and adjust exposure times! Cleans up very quickly and easily with ISP. Good and durable when cured. Has a bit of flex to it which has kept a few items from breaking on me during support removal. I purchased 12kg at a very low price, and found out that was because it has an expiry date one week from purchase. Despite that, zero issues printing! 27s exposure for base layers gives perfect base adhesion. Elegoo times for this resin were spot on. I've only had one partial failure on 1/12 items during my second print and that was because I set the base layer exposure time too low. I've become a big fan of the translucent resins with Elegoo.

I’ve been using the ELEGOO ABS-Like Plant-Based 3D Printer Resin for several months now, and it’s been a game-changer for my 3D printing projects. The low odor is a significant improvement over traditional resins, making the printing environment much more comfortable. The resin’s high precision and low shrinkage rate have resulted in detailed and accurate prints, enhancing the quality of my models. Additionally, its compatibility with 405nm wavelength printers ensures versatility across various 3D printing setups.

Doesn't smell. Nontoxic. Its great for my projects and easy to use. Great for anyone starting out too.

J ai eu de problème d impression avec cette résine et très forte odeur non recommandée

Super livraison très rapide