DIGITEN Wireless Thermostat Plug in Digital Temperature Controller Outlet Programmable Thermostat with Build-in Temperature Sensor Remote Control Greenhouse Thermostat Outlet Plug for Heater

This is a very nice device. I plugged a small fan heater into the plug-in portion, ran the temp. censor to the back of the heater. Set the remote to the run (on) temp, set the stop to 1° above that. It worked perfectly. Once the room got to temp. It would be off for 30 mins and on for 3mins. And that was with the heaters low setting. The remote has an always on and always off mode too. There are other modes but I dont use them. I keep a quiet fan running to distribute the air evenly. Of course the heater must have a manual on/off switch. The more I use it the more I like it.

This product ( to control 2 separate zone heaters ) with the probes plugging into each controlled power plug at the location of each heater worked perfectly to maintain the overall apartment temperature between 74ºF and 75ºF ---- eliminating the constant need of waking up frequently through the night due to the room temp being too hot ( 77ºF ) of too cold ( 72ºF ) and having to MANUALLY re-adjust the built-in heater thermostats to get the temperature back into the SLEEP COMFORT ZONE . Originally , I use alexa controlled power plugs , so that when the temperature ( during sleep ) got too uncomfortable , I could at least shut the heaters OFF without getting out of bed . But , if I was asleep too long , the temperature could still drop too uncomfortably low , and I would have to ask alexa to turn the heaters on , again . With these REMOTE controlled power plugs , setting the lower / upper VALUE for turn ON / OFF , made the task of keeping a tightly controlled SLEEP ZONE temperature totally autonomous . The results , less interrupted , more restful SLEEP and comfort all day long .

All good after a year running my attic fan. Remote settings are a bit confusing. My application doesn’t require exact temps but it’s running when I expect and not running when I expect.

First, thank you to the person that said her daughter wasn’t good with remotes and suggested to get the option where the temp is measured by the plug rather than the remote. I don’t need to change the settings often so there is no need to have the remote laying out in the open. It’s tucked away in a drawer and the temp of the drawer is not important as the air around it. This plug works really well. Be sure to set it with at least a 5 minute delay. I have finicky breakers and this has been plugged in for a few weeks straight without any problems. I have a $30 space heater plugged into, so it’s not a high end heater and it is doing well with the delay shut offs at 5mins. Once I read the directions it is very easy to set. You set the low and the high. So I have it set to shut off at 67 degrees. I have the low set at 64. It hovers around 65 most of the time which is perfect for me. It has alarms you can set too. So it can wake you or alert you if the room gets below or above a certain temp. This would be really important if it being used as a primary source of heat in a room with pipes, plants, or children. Most likely indicating something is wrong with the heater that is plugged into it. One thing to note for those sensitive to light and sound. When the unit kicks on or kicks off, a bright green light beams off the remote and the click of the heater turning on or off can be heard. The light and the click only last a quick second. It doesn’t bother me since I keep the remote in the drawer. I sleep with a sleep mask anyway. But wanted to put it out there in case anyone has concerns. Again, it’s only for a second but it is bright. Other than that, I highly recommend this. I wish I found it sooner. I plan to get another one and plug it into a timer to heat up my sun room in the morning so I can do yoga in there during winter months.

Worked well for a short time, then remote sensing unit quit working. I contacted the seller and they sent me a new sensor (three weeks, slow boat from China). Second sensor lasted about 3 months. These are cheap junk.

Need a little heat for your human body? This will work with nearly anything. Your vampire boyfriend a little too cold? Turn up that heat, baby! I've been using this for our heat during the cold cold nights and keeping a nice consistent temperature during the day. Don't like it hot? Why not try cold! If you can't get cool enough for the sweet embrace of a vampire, then plug this into your AC and you've got yourself the perfect temperature for you and your glittering man. Great control, easy to use. Vampire approved.

Excellent remote thermostat

The manual is borderline incomprehensible. If you sell a product in whatever country make sure you hire someone who knows the language to translate it. The Functionality leaves a lot to be desired: manual mode is cumbersome to use and go from auto to manual. Setup is horrible, just trying to set the target temperature. There are all these additional bogus temp high, temp low, garbage. Let me set the temp and keep it within a degree of that. How hard can that be? Highly dissatisfied with this product.