Topeakmart 2-Tier Rolling Desk with Printer Shelf & Keyboard Tray, Rustic Brown

I needed a small desk to fit my desktop computer. I was a little concerned because most of the desks I have seen (of this size) are quite poorly made, but I took a chance on this one and so far I am very happy with it. I put it together quickly, about 20-30 minutes at most and it is excellently designed. I did read some comments here that it was 'rickety' or 'jiggly' but I do not find this to be the case. I will say that the supplied tools are, perhaps, not the best in the world. I used my own tools and so perhaps I got things tighter that way, but the desk is incredibly great! I liked it so much that I got a second one for my wife. There were some small problems with my order and Topeakmart was quick to resolve them, so extra credit to them for that. I upgraded to a new computer and a monitor stand in January 2020. The computer case was too large to fit under the supporting wooden backplate that helps to stabilize the desk. I removed the lower screws leaving the upper ones attached for some stability and was able to position the new computer on the lowest shelf. The backplate proved also proved to be an issue with a monitor stand. A monitor stand is a great enhancement for such a small desk since it gives you more real-estate for papers, manuals, etc. I was initially planning on attaching the monitor stand with a C-Clamp (provided with the monitor stand), but the backplate made that impossible. Removing it completely would make the stand too unstable. Fortunately, the stand also had an option to mount it directly to the desk, which required drilling a small hole, but was very easy to do. However, if you buy a stand with only a C-clamp, it will not work. Perhaps they will design a new version with smaller strips (perhaps metal?) that will give users more flexibility. I'm still very happy with the stand overall and happy with my purchase and would recommend this desk to you.

*Warning* - just a note that the keyboard tray for this is a bit narrow. Either you have to get a pretty compact keyboard or plan on using your mouse/mousepad on the upper desk surface. We had a little bit of a struggle with how tiny the marks were for where certain screws were supposed to go for putting this together, but mostly my boyfriend put this together by himself and thought it was fairly easy. Almost completely assembled, he realized one part was missing. (One of the slider sides for the keyboard tray.) I contacted the seller right away and received a kind and helpful response within just a couple of hours. I was impressed. And even moreso when it was only another day before they'd sent us the part. Excellent customer service! We definitely ordered the right desk from the right people! Really appreciate the clear communication and support. For ME, this desk is perfect - we are in a somewhat small apartment and my boyfriend already has a big desk that takes up quite a bit of space for his work. I needed my own desk partly because we couldn't really play games together if we were sharing a desk/computer. This worked out perfectly for us. I love it and I'm sure I'll use it for years to come.

Sturdy, fit my 32" AIO, my printer fit on top although it hung over a bit. both modem and router fit on top too. It arrived early, and in good condition, box was exact fitting. everything was there in the box. but 1 part was the wrong part. put together in less than an hour. but 1 under shelves arms was wrong. piece to hold level in place, wouldn't fit, sits awkward now. used a black flat backing to a shelf i'd had before, for the bottom of the back side used zip ties keep in place. see 1rst pic with metal brackets one is missing a screw on backing, due to being the wrong piece and won't fit the screw in piece. 1 is flat, it's the right piece. round is wrong. I would buy again. Update 11-30-2018 I'd originally bought this for sitting by or at the couch. It's what I'm currently using it for. With the wheel's it sits higher. Due to this the keyboard and desk sits higher than the couch and myself. If you could lower the keyboard I think it'd be better. Annoying.. but I'm dealing with it. The desk it's self is very sturdy and doing it's job. I'd definitely recommend it and buy it again.

It was fun to put together. There was a hole that needed to be drilled. It took about an hour to assemble. I have a large space area, for that said on space, it works for me. I plan to purchase new wheels for the desk. The wheels on these products are always like old luggage--it works, yet around corners eh slowish. Updated 6/22/2021 This is a good computer desk....except for the wheels. They are really terrible. One of the wheels was flat making it sort of difficult to move around. I purchased a set of replacements that turned out to be the wrong size. I will tip you that the stem is sort of a hassle to measure. I purchased a second set of wheels that were supposed to be the correct size, yet only one wheel fit correctly. I left the incorrect sized wheels on causing one wheel to crack the bottom piece as it pulled the wheel out. I slipped a rug under the desk to move the desk around. It is not easy to find the correct replacement wheels on Chinese products. I suppose I could make or purchase a wooden moving flat with wheels to move the desk around. If anyone has the correct wheels I would appreciate your input.

Nice little desk. It's about as small as I'd expect, but has big carrying capacity. Holds a full tower machine, and I put my keyboard on the monitor shelf so I have a place for my laptop dock on the keyboard tray underneath. My printer is elsewhere, so I use the top as a bookshelf. It's slightly wobbly as I type, but then again I've made it at bit top heavy with my books and heavy monitor so I ding it no points at all. The wheels don't roll that well on hardwood, but for under $70 I'm not expecting precision ball bearings. Again, no dings- it's cheap. Just don't expect to be dragging it all around the house; it's fine for occasional moving around which is what I need. BTW, my monitor is a 27"; I think a 30" would work too but you wouldn't have a lot of clearance underneath the monitor. Finally: You MUST have your own phillips head screwdrivers. They supply one but it's really useless for the large point sizes used in the screw heads. And, there are a couple of rubber protectors on the keyboard tray that come off really easily. Get some contact cement and glue those things on; I knocked them off innumerable times while putting this together. Assembly took about 1.5 hours.

Love the fact that it was easy to set up (assemble), instruction where super easy to understand. It’s great for my house. Small enough for the corner it’s in, big enough for all the things that I have. And still has enough space for a little extra. Sturdy and firm. Came with a screwdriver and a ranch. “I used a drill, it’s worked a lot faster”. Minor incident while drilling the holes to the key boards side thingamabob, the plastic covering was coming off. But other than that everything was great. Came with and extra screw in all of the little packs. Thanks again.

My company is making me work from home (and they're too cheap to give me a computer to take home) and I don't want to use my main gaming rig for work, so I bought a cheap computer to sign on to work, and so I needed a small computer desk for it. After several failed attempts at buying a small computer desk from various sellers on Amazon (the first desk I bought the keyboard surface was way too high, the second desk I ordered the guy cancelled my order the next day saying he couldn't ship to my country, the third desk just never showed up even though FedEx says it was delivered). Finally Topeakmart came through :-) It arrived within several days of placing my order on Amazon! Thank you, Topeakmart!!! :-D The desk surface and keyboard are at a perfect height. I set the completed unit next to my main computer desk and the keyboard and desktop are exactly the same heights. The desk is sturdy and well made. It was a bit challenging to put together though; I could have used a third hand a couple of times, but I managed to assemble it by myself. The package included lots of spare nuts, bolts and screws -- something very few sellers of kit furniture do, so again excellent product, Topeakmart!!! They also included a very nice magnetic screwdriver with it -- awesome!!! :-D The only negatives are that the bracket holding the very top shelf isn't attached very well to the bracket attached to the base of the unit, and so it flops around a bit unless you tighten the screws super tightly. I wouldn't put anything heavy or breakable on the very top shelf like a printer. But that's a minor quibble since I don't see any reason to put anything on that top shelf anyway. The main shelf and keyboard shelf are quite sturdy. The floor shelf is large and perfect for placing the computer, itself, on. EDIT: After using this desk for a few months, one problem has revealed itself. The keyboard shelf is about 1/8" too narrow between those sliding rails. It keeps falling out of those sliding runners whenever I slide the keyboard in or out. I had to buy a couple of wood pieces and glue it in place in the open position to keep the keyboard shelf from falling off every time I pulled it out or pushed it in. It's not a big deal for me, but those of you with OCD or in a tight space who need to close the keyboard tray when not in use may find this super annoying.

My husband just set it up last night. So far I am very happy with this. More room than my last one by far. It's attr4qactive too. Haven't quite settled ion yet but the amount of space for your stuff is amazing. Top shelf is still empty Only thing is that the pull out shelf for the keyboard doesn't stay in place. It's light to the touch and moves back in under the main shelf as you type. Once you get used to it, you learn not to lean on it. Don't hesitate just BUY IT!