IMBZBK Matte Screen Protector for iPhone 17 Pro, Tempered Glass, 3+3 Pack

For the price it a better deal than other and actually very good quality!! My finger get sensitive after using my phone for a while now I don’t have that problem anymore due to this screen 10/10 LOVE IT also very easy to install

This comes in a 3-pk. The first one i installed, i glanced and barely watched the installation video. Bad idea, i thought it wasn't a big deal, it was a poor installation but it was my fault. As a result, the bottom of the film lifted from the very beginning and before long there was dust, dirt and debris underneath the film. Tonight, before installing the second film, i watched the video twice and paid close attention. It was a perfect installation. It looks really good and i will likely buy this product again. I am in landscape and construction and i know i will need to replace this again. I will say that at some point I got a little tear in the film, right in the middle of the screen and another one on the top left curved part. i just flattened the film back on to the screen and it stayed put. The biometrics log-ins work really well with this film. I've even been able to scan my fingerprint with gloves on. They are those black Gorilla work gloves that have the rubber worn off of them (through use). My thumb spreads the material just enough to get a decent read for the scanner. I was surprised it worked, it scanned my print with gloves on and thru this film. I am extremely satisfied with this product so far. I will say this, WATCH THE INSTALLATION VIDEO before installing the film. It will save you some annoyance and you'll protect your device better. Also, this is the only protective screen film that doesn't interfere with the fingerprint scanner. I tried other glass covers and they did NOT work with the fingerprint scanner, even when you set the fingerprint sensitivity to the highest level, they only worked about 10% of the time. This one actually works!

I bought a set of IMBZBK screen protectors two years ago (April 2024) and had good results. At that time, we had two new phones. I messed one up somehow, don’t remember what I did, but the other two protectors have been in service for two years with no issues. The camera lens protectors fit inside a Raptic Sheild and the billfold style case my wife uses. Got new phones this month, so went to Amazon and used the “Buy it again” link and ordered another set, this time for iPhone 17s, they were for iPhone 13s last time. Because I used that link, I assumed, incorrectly as it works out, that the link would be for the same product I ordered before. It was not. I assume it is an Amazon issue, but that link did not go to the same screen protector as what I ordered two years ago. The set I got had a matte finish, and a very thick camera lens protector. The original, the one I thought I was buying again, had a glossy finish and a reasonably size camera lens protector block. The new screen protectors went on as advertised. I did get a couple bubbles, and worked them out with finger pressure, then increasing finger nail pressure. In the one-star reviews, several mention that the screen protector is soft and can be scratched by a finger nail. That did not happen to me, there are no scratches whatsoever. The one issue I did have is the camera lens protectors. They are .110” thick (I miked one), about twice as thick as those included with the set from two years ago. I am using a SUPCASE Unicorn Beetle Pro case, and with the camera protector installed, there was a large bulge on the back of the case. It wouldn’t lie flat, and the case was flexible or squishy in that area. Ended up replacing it with the Hoerrye camera lens protector, which fit perfectly. Minus on star for excessively thick camera lens protector.

Never been a big fan of glass protectors as they seem to come unstuck from all of my devices especially when used with my Otterbox case. So I usually stay with these style of protectors. This one was one of the simplest installs I have ever done. The only issue that I ran into was a rouge cat attack on my desk that left a stray hair under the first protector but there are 3 in the box so after a quick reset (and relocation of the cat) the second install went on with no issues. No bubbles, no curled edges. Screen looks just as good as it did without the protector. The customer service from this company was even better. While waiting for my package to be delivered they reached out to me via Amazon and gave extra installation pointers as well as a direct link for an installation video for my specific device (Pixel 6 Pro). Not many companies anymore that will go that extra mile any longer. The fingerprint reader on the Pixel 6 Pro works just as well as it did without the protector. I see no difference in response and I never had to re-register or enable enhanced sensitivity on the phone. Protector works great with my Defender Pro case. No curling around the edges and no peeling. The protector also included 2 glass protectors for the rear camera but I did not install that on my device so cannot comment on the quality of those. They did look very clear when looking through them (Others I have seen had a slight haze to them) so wouldn't expect any photo interference. This was my first purchase from this company (although I have a similar protector on my son's Note 20 from a different company) but will happily look to them again in future purchases.

After installing it, I thought for the longest time I had missed another safety sticker because the feeling of it just doesn't feel right (idek how to explain it but it's definitely not like a glass, more of a rubbery feel maybe?). It would get indentations from the slightest scratch of your finger nail but not entirely visible unless the light hits it just right. That was something I could deal with. I haven't had this on for 2 months and today, it started to bubble up from the middle (there hasn't been a bubble there the whole time since it's been on) literally out of nowhere. By the time I picked my phone up again, it was about an inch wide bubble. Just to add, this wasn't a typical air bubble that you see stuck in screen protectors, this bubble was coming out of the protector away from the screen. The only way to get it to stop was to push it down which caused folds and ripples where the bubble was. I thought once again maybe I somehow missed another protective layer and figured it couldn't get any worse (I was just gonna replace it anyway) so I pulled it up and sure enough it was the screen protector as a whole. My phone doesn't get banged around at all, it wasn't out in the heat nor was my phone overheating which I could've understood but it literally came out of nowhere and while it say on my coffee table, untouched. Its only been a couple of months and now I'm going to have to buy more from somewhere else cause it's not worth the hassle anymore. As far as the touch goes, it was alright. Nothing special and you have to constantly be careful or else you'd scratch the crap out of it which I'm sure adds up eventually

These seem great at first and have an easy application, but you quickly find out they are not durable and crack easy. I have gone through 4 screen protectors in about 9 months. I have never used this many screen protectors on a single phone.

The installation process is definitely a bit odd, but it goes on pretty easily once you've lined it up and it's *way* more seamless than I expected: the protector goes just far enough over the curved edges so as not to interfere with a case but also provide maximum screen coverage. When I have a case on, I can't even (visually) tell there's a screen protector aside from the cutout for the selfie camera. It definitely has a different feel to it, but after enabling the "Increase touch sensitivity" in Display settings, the touch screen works just as well as before. I'd also say I quite like the different feel; it's rubbery but in a nice, sleek way. Fingerprint reader works the same, and the screen is just as bright and beautiful, at all angles, with the protector on. They send a whole box with 3 (TPU) screen protectors, 2 (glass, I think) camera protectors (which are super easy to install and also fit within my case perfectly), and even a table grip and alignment tool for installation. I don't know what magic they put into it, but they also claim any bubbles from installation will go away after 24 hours -- and yeah, I don't see any, and it almost feels like the screen protector molds to my phone perfectly. This is the screen protector you want. Get it. (Unless you really want glass for that extra drop protection. But you should really be getting a good case -- dbrand perhaps? -- if you're worried about drop protection; screen protectors are best for scratches.)

The IMBZBK [3+2] Screen Protector and Camera Lens Protector Set for Google Pixel 6 Pro 5G is the ultimate solution for safeguarding your device against scratches, scuffs, and impact damage. This comprehensive kit provides all-around protection, ensuring that your Pixel 6 Pro remains in pristine condition for years to come. First and foremost, let's talk about the screen protectors. Made from high-quality flexible TPU film, they offer crystal-clear clarity and responsive touch sensitivity, preserving the original look and feel of your device's display. The case-friendly design ensures compatibility with most phone cases, while the bubble-free installation process makes it easy to apply without any hassle. But that's not all - this set also includes two glass camera lens protectors, providing added defense for your Pixel 6 Pro's delicate camera lenses. With their precise fit and durable construction, they shield the lenses from scratches, dust, and fingerprints, ensuring that your photos and videos remain crisp and clear. What sets this protector set apart is its attention to detail and user-friendly design. The included installation kit makes the application process a breeze, with easy-to-follow instructions and all the necessary tools provided. Plus, the bubble-free technology ensures a smooth and seamless installation, eliminating any frustration or air pockets.

Gran producto, en verdad no quedan burbujas, para la colocación trae todos los accesorios para una colocación perfecta además con apoyo del vídeo, el plus es el protector del modulo de camaras.

Video guidance help but the design of the product itself is genuine intelligent.. Extremely easy to apply and install.

I have always used glass screen phone protectors in the past. Initially, I did not like the idea of film screen phone protectors. I thought they could never feel as smooth as the glass ones. I was wrong! This screen protector feels just as smooth as the glass screen protectors, and it is much easier to install. I was able to install the film in one go without any issues, but I had to reposition the plastic/glass camera lens protector a few times to get it right. The film is incredibly thin. After the installation, I can barely tell where the edges of the film are. The fingerprint sensor works beautifully with this screen protector. There isn't a weird cutout or patch on this screen protector at all, it is all seamless. Overall, I am very pleased with this product. I have my fingers crossed that it will provide excellent protection too.

It was expensive but the best in tbe market.

Están bien, pero creo que son muy caras para lo que te ofrecen