Godeson Bike Tyre Pressure Gauge,100PSI/7Bar Bicycle Tyres Pressure Gauge for Presta Valve, Suitbale for Road Bike,Mechanical Gauge,No Batteries

Precise and easy to use on a bicycle, very compact, well made.

Arrived on time and works well. Bought to check against my floor pumps gauge and it shows 4-5 lbs + of a difference but I am more inclined to believe the reading on this compared to the pump. Easy to read as it holds the pressure when you take it off of the valve or if you want to lower the tyre pressure when it's on there is a release valve at the side to save you taking it on and off to check. Feels sturdy enough.

This gauge seems accurate (same readings as my track pump anyway!) and is easy to use. The ability to slightly over inflate and then use the relief valve to bring the pressure down to required level is very useful. Today's tubeless road tyres seem very sensitive to subtle pressure variances in their feel when being ridden. I'm running Mavic Ksyrium Elite UST wheels and because the back wheel is slightly deeper sectioned than the front, the length of valve sticking out is only just long enough for the pressure gauge to be pushed on far enough. Time will tell whether it will still be airtight once the gauge washer wears a bit after repeated use.... The rubber "fake tyre" cover overlaps the dial a bit too much meaning you have to angle the gauge once off the valve to read it (I use 80 - 86 psi), but it's not the end of the world and I've left it be. I've knocked one star off because my gauge didn't hold the pressure reading when removed from the valve. I asked via this site if other buyers had had a similar experience and the majority haven't. One reply highlighted that I may have inadvertently got tubeless sealant in the relief valve. I followed the instruction manual with regarding clearing this (pushing twisting and pulling up the relief valve button) and it has improved it to a point where the pressure reading will hold long enough for me to read it - but then it slowly sinks over a few minutes. I can use it at this so I've kept it without returning it. I like this gauge. There is something reassuringly mechanically olde worlde about it with it's metal and brass construction and Bourdon tube mechanism. I much prefer this to a digital gauge, and it's significantly cheaper than the traditional well known brand names out there (which also seem to have their own issues nowadays according to their reviews). For the price, it's excellent value for money. I've also bought one for a relative of mine as a Christmas present!

Simple, effective and contrary to other users simple to fit (go 'in straight') to valve and reads fine for high pressure 700cx25 tyres at 100psi. Matches track stand pump - useful for those just check before ride moments. Air leak button is a boon for getting accurate values. Why go digital?

Sent back. Gave reading once, then gave up the ghost. ‘Air lock’ was seized and faulty glass/plastic on display. Just deflated the tyre instead of giving a reading. I’d hope I was just unlucky with the ‘one’ faulty device, but I wouldn’t buy again

In my opinion something all cyclist with PESTA value bike tyres should have. Just switched to tubeless tyres so needed to check pressure for piece of mind. This fits in the palm of your hand and easily into a saddle bag. Quick and easy to use holds pressure reading when removed from the valve so makes reading a doddle. Also has very useful button on the side that releases pressure once read and also allows controlled release of air to get an accurate pressure in the tyre.

This tyre pressure gauge is the best thing from the US since the 1969 Mustang. Usually it's fight to get the gauge onto the valve with out letting an amount of air out of the tyre. Take it off and the reading has gone. But this beauty is another story. It goes straight on with no air loss at all and silently. Pull the gauge off the valve, again no air loss and the reading stays on the dial. Press the button to lose the reading. Whilst connected, pressing the button lets a small amount of air out if the pressure in the tyre is too high. It is nice and chunky and appears well made and a snip at the price.

I’ve purchased this as a gift for a family member to keep with his bike used to cycle to school so he can check his tyres to keep them in good condition rather than rider over or under inflated and damaging or wearing down the tyres. I purchased because of the tyre design in that it has a rubber tyre external case (does cover the glass/plastic) which will hopefully protect it slightly; and the fact that it’s relatively compact. The shape is round(ish) which means it takes up less space than the one I use for my car tyres. I don’t have the capability to test accuracy as my car tyre one isn’t presta tyre gauge but it does seem accurate and claims is validated with calibration to ansi B40.1 international standards. It’s quickly chunky but in a good way ie you feel it in your pocket but it’s easy to hold and use. All in all a cool little gauge and a good present for a cyclist. There are more expensive products out there but this serves its purpose and as user isn’t a professional rider or on roads for long distances this is more than sufficient.

This Presta tire valve pressure gauge is fantastic. It works with Presta valves without using adapters. In addition it keeps the pressure reading until you hit the release button. This is a MUST BUY gauge.

No funciono, completamente descalibrado, lo verifiqué con otros calibradores que si funcionan y tenia una variación de al menos 10 psi’s lo regrese inmediatamente

Great size and easy to use!

I tested it on my bike’s presta valve. It was able to measure the pressure with almost no air leak. Very responsive dial and easy to reset. I just have to accept that because it’s not digital and the dial is not that big, the calibration reading can be off a psi or two. But that is okay for what I use it for.

Bon outillage Correspond à la description