LG-M01 Miter and Portable Saw Laser Guide, Miter & Portable Saws , grey

I’m quite happy with this accessory. It was easy to put on and doesn’t get in the way of anything. I put it on my 10in Bosch glide saw. I didn’t have high expectations for this but it is extremely accurate. I never take the saw out of my shop but I could maybe see on a job site or having it outside, that the laser might be hard to see. I haven’t tested this but in my shop, I have no problems at all seeing it. I didn’t want to go through the hassle of putting on a shadow line accessory and this seemed like a good value. I thought maybe it was going to be too large but like I said, it fits very well and doesn’t get in the way of anything. It’s been going strong for 6 months now and I’ve had no issues. Again, I haven’t tested this theory but I think it’s design will allow it to be used on just about any miter saw.

I recently purchased the Oshlun LG-M01 Miter and Portable Saw Laser Guide for my miter saw, and I must say that it has been a game-changer for my woodworking projects. This laser guide has significantly improved the accuracy and precision of my cuts, making my work much more efficient and professional-looking.The installation of the laser guide was straightforward and hassle-free. It fit perfectly on my miter saw and the alignment was easy to adjust to ensure that the laser line was accurate with my saw blade. Once installed, the laser guide provided a clear, bright line that helped me visualize exactly where my cuts would land, resulting in precise and clean cuts every time.I particularly appreciate the portability of this laser guide. It is compact and lightweight, making it easy to transport and use on different job sites or workstations. The durability of the guide is also impressive, as it has held up well to regular use and has not required any adjustments or maintenance since I installed it.Overall, the Oshlun LG-M01 Miter and Portable Saw Laser Guide has exceeded my expectations and has become an essential tool in my woodworking arsenal. I highly recommend this laser guide to anyone looking to enhance the accuracy and efficiency of their miter or portable saw cuts. It is a small investment that yields significant improvements in the quality of your work.

Many times on my old (30yrs) Dewalt DW-705 Miter saw I had wished there there was a laser to pinpoint the exact cut line, like most modern miter saws have. I've seen the 𝐎𝐬𝐡𝐥𝐮𝐧 𝐋𝐆-𝐌𝟎𝟏 𝐌𝐢𝐭𝐞𝐫 𝐚𝐧𝐝 𝐏𝐨𝐫𝐭𝐚𝐛𝐥𝐞 𝐒𝐚𝐰 𝐋𝐚𝐬𝐞𝐫 𝐆𝐮𝐢𝐝𝐞 on Amazon for a long time and finally decided to try it on my DW-705. In past reviews I've read some comments about the laser housing being too thick and rubbing against the blade guard housing. Ohslun mentioned that this newer model was thinner and fit more saws so I thought I'd give it a try. Installation was as simple as removing the orginal spacer and replacing it with the 𝐎𝐬𝐡𝐥𝐮𝐧 𝐋𝐆-𝐌𝟎𝟏 𝐌𝐢𝐭𝐞𝐫 𝐚𝐧𝐝 𝐏𝐨𝐫𝐭𝐚𝐛𝐥𝐞 𝐒𝐚𝐰 𝐋𝐚𝐬𝐞𝐫 𝐆𝐮𝐢𝐝𝐞. I tightened down the blade retaining bolt and fired up the saw. My first reaction was well, the laser works, looks accurate but it was making a heck of a noise and seemed to be vibrating a little. I stopped and unpluged the saw and removed the laser guide. On close inspection of the laser guide I could see that something was rubbing against it (flub). I completely removed the blade guard to see what the situation was by removing the 3 T30 torx screws holding the blade guard assembly to the saw. What I discovered was that the laser guide was rubbing in one little area of the blade guard housing. Now that the laser guide had scrape marks on it I couldn't return it so I started thinking about a fix to see if I could add some clearance between the 𝐎𝐬𝐡𝐥𝐮𝐧 𝐋𝐆-𝐌𝟎𝟏 𝐌𝐢𝐭𝐞𝐫 𝐚𝐧𝐝 𝐏𝐨𝐫𝐭𝐚𝐛𝐥𝐞 𝐒𝐚𝐰 𝐋𝐚𝐬𝐞𝐫 𝐆𝐮𝐢𝐝𝐞 and the blade guard housing. The fix was easier than I figured it would be. One little flat washer mounted at the front and the rear blade guard mounting screws in such a way as to add 𝒋𝒖𝒔𝒕 enough clearance between the blade guard and the 𝐎𝐬𝐡𝐥𝐮𝐧 𝐋𝐆-𝐌𝟎𝟏 𝐌𝐢𝐭𝐞𝐫 𝐚𝐧𝐝 𝐏𝐨𝐫𝐭𝐚𝐛𝐥𝐞 𝐒𝐚𝐰 𝐋𝐚𝐬𝐞𝐫 𝐆𝐮𝐢𝐝𝐞 so that there was no more rubbing between the two surfaces. I Fired up the saw again and this time everything was nice and smooth with a clearly visible red line at the point of the cut. (I purposely positioned the laser line 𝒋𝒖𝒔𝒕 a bit off the pencil line to show everything is square). Lastly, I also discovered that a "thin kerf" blade may need no modification at all as I noticed more clearance between the 𝐎𝐬𝐡𝐥𝐮𝐧 𝐋𝐆-𝐌𝟎𝟏 𝐌𝐢𝐭𝐞𝐫 𝐚𝐧𝐝 𝐏𝐨𝐫𝐭𝐚𝐛𝐥𝐞 𝐒𝐚𝐰 𝐋𝐚𝐬𝐞𝐫 𝐆𝐮𝐢𝐝𝐞 and the blade guard.

First let me say this is the 2nd Oshlun Saw laser device I've purchased as the first has worked flawless for the first year on my Miter saw. This one I just installed on my 7.25" Circular saw, and it also works flawless. There is no trial guesswork for deciding where to engage a straight line, sawing is then accurate. I highly recommend these lasers, and they come with spare 357 batteries also! This is a great useful tool that enhances your precision cutting.

I was expecting to return this as soon as I got it. I looked it up on YouTube and for a good setup video. I expected the worst after seeing some reports that it wouldn't work on my Bosch 12" miter sawI went from a plastic encased tool to a working laser in 15 minutes with the most difficult part being finding my hex wrenches (Neatness is not my strength) It has worked flawlessly since. Thank you Oshlun!

Works great on my Bosch 12” articulating Mitre saw. Cast a fine laser line almost as thin as a pencil line, and the cut is spot on. Highly recommended

I bought two of these to add to a Ryobi TS1343L 10 Inch Miter Saw, so that I can have a laser guide line on both sides of the blade. There is a company who sells dual laser guides, but they do not list this saw as compatible, and I read reviews for the Oshlun brand in which an Oshlun company representative is quoted as saying theirs are brighter than other brands. Since the one Ryobi uses is all but invisible in bright daylight, I was hoping to improve the situation.The first thing I did was remove the saw blade, and mount one of these Oshluns next to the OEM Ryobi laser guide, and run the saw. The lines are identically bright. I do not see any more brightness from the Oshlun at all.There is one thing the Oshlun LG-M01 has going for it that the Ryobi laser guide cannot do. The Oshlun model will work no matter which way you mount it on the arbor. The Ryobi model that came on the saw MUST be mounted with the label side out, or the laser doesn't come on when it spins. Because I wanted to use dual guides, I need to have one replace the inner blade washer, and so must be mounted in reverse to keep the laser close to the inside of the blade.Note the round hole on the face of the Oshlun in the picture shown in this review. Ryobi uses a "D" shaped hole all the way through the guide. The back side of the Oshlun has a similar modified hole which is about 7/16" by 1/2" rectangle with rounded corners, to allow it to slide onto the flats on a typical 5/8" arbor shaft. It is their intention this guide be mounted right under the head of the blade bolt, so the smaller round hole on the face of the device works fine if used singly as intended. But to make it slide to the inside of the blade, I had to machine the round hole you see in the picture to match the contour of the rectangular hole on the back side. Once I did that, it slid into place nicely, with the label side toward the motor, placing the laser along the inner blade edge.I then mounted the blade and the Ryobi laser guide, and was able to use the OEM bolt, with plenty of threads screwing into the shaft. It works very well, showing a line on either side of the blade now when the motor is started. There is a slight difference in the positioning of the Oshlun's line, such that after a straight cut is made in the stock, the inner laser line falls IN the kerf, up against the inside bottom edge. The Ryobi guide's line on the outside of the blade remains on top of the edge of the cut after it is made. I was able to correct most of this by adding a paper shim washer between the blade and the Oshlun guide, much as you would do to fine-adjust the width on a set of dado blades. Because this worked with the original Ryobi guide, I did not open the second Oshlun guide, and will keep it as a spare.I was hoping to see a lot brighter line from the Oshlun brand, to make it easier to work in the sun, but the brightness of the 2 lines is equal. It is fine for indoors, even in a brightly lit shop. But for bright sunlight the laser lines are only the tiniest bit visible if you look very hard to see them. Oddly, the Ryobi brand uses a pair of LR44 cells, and the Oshlun uses 3 of them. When I saw that I thought it might be brighter, but it is not.

Lovely tool accessory! Makes cutting much more efficient. I had a fit issue though, was too loose on the arbor screw and had to turn a small bushing for it on my lathe. Bosch 8.5 inch miter saw,

I purchased the Oshlun LG-M02 laser guide for my AEG PS-305 DG 12" compound mitre saw. The existing laser guide on the saw had broken and was no longer available. The Oshlun laser guide works well on this saw, however I had to replace the existing counter-sunk M10 left hand thread arbor bolt with a non-countersunk bolt (30mm worked well). Based on my personal experience, I would recommend this device for the AEG saw if the original laser guide part fails.

funciona excelente, fue un abuena compra para cortes exactos

O produto é muito robusto e cumpre o que promete. Muito preciso na indicação da trilha de corte. Apenas aconselho a verificarem a compatibilidade com a sua esquadrejadeira, no meu caso, uma Stanley SM-18, tive que fazer pequeno (0,5mm) ajuste na arruela do disco, para que o laser desse o aperto necessário ao disco. No mais, funcionou com muita precisão.

Utile mais très chère en plus il ne fonctionne pas tout le temps il a falu que je le modifie pour l adapter

Satisfait fonctionne bien