Single Monitor Stand, Fully Adjustable Arm for 17 to 32 inch Screen, Mechanical Articulating Desk Mount, Gaming and Office Setups, VESA 75x75, 100x100, Max 19.8 lbs, Classic, Black, STAND-V001O

Amazing monitor for the value purchased, and was very easy to setup. A huge step-up from my IPS monitor and the arm holds the monitor well. It has good height adjustment features because of the arm and fits my desk very well. The 27" proportions are great as well for the price

In my initial setup, I sought to optimize my desktop space by utilizing an arm for my 30-inch 4K Asus display. This display, weighing 18 pounds, is manageable for the arm to hold it without any issues. When considering the arm’s placement, it is crucial to evaluate the proximity of your arm to the wall. If there is sufficient space on your desk to position the clamp centrally, this configuration offers the most comprehensive functionality. Conversely, if your desk is adjacent to the wall, you will require additional space to accommodate the clamp on your desk. In such cases, the clamp will need to be positioned to the left or right of the center, rendering certain features ineffective. 1. Potential challenges include cable routing and display movement. Cable routing necessitates ensuring that cables have adequate reach. Additionally, as you move the display towards you, the arm may not maintain its level, necessitating adjustments at each step. If the arm is positioned to the right of the center, it will begin to tilt to the right, and the same issue occurs on the left side. The arm’s design presents certain inconveniences. Tightening the arms to secure the display can hinder adjustments, as loosening them results in sagging. Furthermore, if the arm is only positioned vertically, it will maintain its level but begin to move to the right. Moving it back to the center requires repositioning it downward. The same principle applies when moving the arm downward, causing it to tilt to the left. To mitigate these issues, it is advisable to adjust the arm to its most frequently used position. In my setup, I installed speakers on both sides and centered mine at the appropriate height. Lastly, cable management is a critical aspect to consider. The arm itself was relatively straightforward to assemble, but concealing the cables proved to be the most challenging task. It is essential to plan the routing of cables through the arms. I utilized a power cable, two HDMI cables, and cables originating from both the right and left sides. Due to the arm’s placement, I had to procure a longer power cable.

Versitile, easy to set up and has no issue with my 32in curved monitor. Material feels durable and well made.

Got this stand to replace the single monitor stand that I had. It’s easy to assemble. Comes with a little screw driver and tool to put everything together. The instructions are easy to follow as well. It’s not difficult to move the arms around, and it stays in place. You can connect it to your desk in a few different ways as well. The only thing that I didn’t realize, which is my fault, is that the arms don’t go up as high as I would like them to for the monitors to sit above my laptop screen. Probably another inch and a half up would be good. With that being said, for the price, it doesn’t bother me.

This is an amazing monitor arm for the cost. I checked a lot of longevity and quality focused online forums for recommendations on monitor arms that didn't suck, and I'll say that these don't disappoint, at least so far. They don't sag or otherwise move in a way you don't want them to after you've positioned them, they weren't terribly hard to assemble either, and they've got a great range of movement in all directions, whether you need them to just be higher up, or way further back from your face. The base takes up about 2 inches of space forward into the desk, and doesn't feel obtrusive. It's holding my relatively heavy monitors, with extra weighty cables, and can take a bit of downward or upward pressure from my hand on top before it begins to move, so it's definitely very sturdy. One thing you MUST be aware of though, is that if you have your desk close to the wall, this will have to push your monitors closer to you, since the arms extend backwards if you push the monitors away from you. Think of a "W" shape, where the two points at the bottom of the W are the back of the arms. Pushing the monitors further away makes it more of a point, and pushes that point further back, meaning it could bump into your wall if your desk is too close. Give your wall and your desk some room where possible.

These are fairly easy to put together and are very sturdy. I also like that they come with wire management and a way to run and hide your wires. It attached to the desk and is doing a great job keeping my monitors where I want them. Easily moveable and you can position your monitors however you please. Great addition to my at home office.

This monitor is excellent for its price point. I ordered two and have been using them for the last month. Easy to assemble and easily supports my LG 27" screen which weighs roughly 6kg. The hinges are adjustable too and can loosen a bit to find optimal position of your monitor depending on your preference and then tighten to ensure it does not move from there. The only draw back is it was a bit awkward to tighten the main desk bolt to the desks I currently have and thus the clamp does pivot slightly when really trying to tighten the bolt excessively in the awkward position but so far it has held up well regardless and this has not proven to an issue at all.

Lasted about 5 months before failing on me, monitor tilted to the side, almost broke the screen and I got it working for another 2 days by tightening the screws to hell but 2 days later it fell over again. Don't buy cheap monitor arms. If you just need it temporary then I guess it would be fine but for the price you can do a lot better.

I'll start with the main stuff - it works, it's pretty, the cable management is good, the motion is smooth, and it doesn't sag with my 27" Asus monitor. Well, mostly. 2 problems - angling it upwards doesn't really hold that well, and the most annoying thing - you can lock the level of the monitor. It sounds like a non issue, but it is - every time you want to move the screen you will almost inevitably ruin the level of the screen, since rotation is so sensitive. For the price it's still a good offer, but inability to really lock in rotation for me kind of ruins experience.

Piccollissimo problema con una vite di fissaggio troppo stretta e che impediva l'inserimento di un braccio. Problema risolto facilmente e per il resto a questo prezzo ottimo prodotto.

1) Impossible de faire pivoter les écrans à la verticale. 2) Si le serrage du pivot d'écran est sécuritaire, le mouvement verticale (pivot de bas en haut) se bloque et l'écran reste dans la position définitivement , donc si vous l'avez monté et qu'il pique du nez , c'est foutu pour toujours. 3) la couleur blanche est plutôt couleur vanille, à la rigueur, çe point est le moins gênant. 4) les ranges cables intégrés sont périmés/obsolètes. Impossible de passer les fils des port DB ,on ne peut faire passer que de l'USB .. super nul pour des câbles d'écrans larges....