Keyboard Tray Under Desk

Installed using the extenders. No problem. Enough choice of location to mount all 4. Mat/cover is trash. Too floppy. Wrist pad is hard, teaches you not to rest too heavily I suppose. Squeaks a bit during use as weight is transferred via wrists. I assume a bit of grease will fix this when it annoys me enough. Big wheel for loose/tighten is a bit cumbersome (imo not ‘elegant’ as described) but is functional. Lock in place is fine, tilt lock is fine. Forward/backward slide is held by friction. So far so good, after one week. Board is wide enough for trackpad, keyboard and separate number pad. Board is NOT CARBON FIBRE. Board is compressed wood fibre with a sticker/lamination to make it look like carbon fibre. Do not spill anything! Board is NOT THE DESCRIBED DIMENSIONS. Is not 72 x 46.5cm. Actual size is 72x25cm. I will not be sending this back unless it breaks. Totally solves my space issue.

Pros -Frees up desk space and drops the keyboard and mouse if your desk is too high to be comfortable -Matches most carbon themed desks perfectly -Adjustable enough to find a sweet spot (If you can get over the unnecessarily large knob) -Sturdy as heck (it does have wobble but you get used to it and when it gets a little knock, just the tray wobbles and not the whole desk) -I've seen complaints about the sliding mechanism but it honestly does not cause me any issues and I have to slide it in and out all the time to get in and out of my chair. Yes it would be nicer and smoother on ball bearings but it doesn't keep me up at night. Cons -I miss my right kneecap. Whether or not I sit cross legged, the adjustment knob is just too big and obnoxious and I am constantly battering my knee on it. It also does restrict my options for it's placement. I've seen people mod it but I've just learnt to live without my right knee cap ever being the same. -The wrist rest is awful, it's too thick and rock solid. I took it straight off and used it as a doorstop. However now I can see the fixing holes all the time -MY BIGGEST GRIPE - Once you take off the wrist rest, the mouse mat doesn't fit flush. A second option included would have been great because good luck to anyone trying to find a nice mouse mat that will fill this tray. It's odd size and shape make it impossible. Plus the mouse mat slides around if you don't find a solution to fix it in place. I sit at night fantasy shopping for pretty RBG mousepads that I can never have. I'd even give Eureka my money for a new one.

I bought this to drop the keyboard and mouse down to a comfortable height. It does this perfectly and allows me to adjust the height on the fly for gaming / typing. The tray does flex a little, which in hind site is to be expected. All things considered I'd expect more flex than there is. The brackets that are supplied allow for a good amount of customisation for locating the tray on the EUREKA ERGONOMIC Gaming Desk 112×60 cm RGB Gaming Table with LED Light P44 Computer Desk, as the table support bars are in the centre I used the desk C, configuration for mounting. I was also surprised by the quality of the screwdriver that was supplied.

When it comes to adjustable under desk keyboard mounts there is not a lot of choice out there (that are held securely with screws and not a c-clamp hand tighten), from the few I found online this is the only one that would suit my needs for the standing desk I have which has a thick metal bar/rail (as shown in image) along the middle underside, this keyboard tray comes with brackets which can be mounted to the sliding mechanism at various positions to bridge over the bar/rail (other brands sold these separately). My bar is roughly around 2" and this bridged over it easily with a little room to spare. I have a full sized keyboard/numpad with a trackball mouse and this is ample room for this setup but If you use a optical/mechanical mouse (why are you still using a mechanical mouse?) with a full sized keyboard then I think the movement of your mouse will be restricted. It has height/side/tilt and rotational adjustments for nearly all requirements and doesn't excessively hang down to much when pushed in under desk even with the bracket extenders fitted. At £104.99 (at time of purchase) I was sceptical about buying this as it seemed very expensive but as it had all the features I needed (height/side adjustable, drop brackets, keyboard length) I went ahead and am really glad I did.

The idea is great, but it could do with bearings in the runners. It functions fine, it just feels kind of 70s drawer type, grinding when extracting. Wobbles a bit, due to loose pivit arm. It looks great, but over priced at £99. Notice that the price is now £119, with a £20 discount. Its not a bargain.

The self-tapping screws needed a bit of pressure to get started, but once fitted, this is a solid piece of kit. I’ve been using it for over two years now, and it’s still sturdy and reliable. It adjusts easily to find the most comfortable position and slides away neatly when not in use, keeping my desk tidy. A great addition to any home office setup!

Needed something to use on a Xrocker table to sit the keyboard on - and this fits the bill nicely. Installed using the stand off legs - so only attached using 8 screws - but seems to be sturdy enough. The stand offs are large enough to locate the sliding mechanism clear of the table frame. To assist used some gorilla tape under the mounting feet. Good amount of adjustment - the only criticism being the slide mechanism - which is comprised of 4 x nylon blocks in a channel as opposed to rollers - and a little stiff. The plus side of this though is once pulled out and adjusted left/right up/down it remains in position. Nice firm wrist rest, and also comes with a mat to cover the complete tray. I have seen criticism of the mat - in that it can stretch or move - but I haven't experienced any issues to date.

I bought this to give me more desk space, so I can also use my work laptop when I need to. It's also lowered my seating position to make it far more comfortable to sit at my desk for extended periods Pros pretty straight forward to fit with multiple mounting options to suit your desk. Slides really easily on the plastic slides and is very adjustable Also tilts side to side which is great if you have a multimoniter setup Cons The wrist "support" is rock hard and uncomfortable, it's easy to remove just 3 screws. I replaced it with a much softer one. I have a large keyboard (corsair k55) and there is just enough room for it and the mouse to be used comfortably. There is a little side to side wobble but it really isn't that much of an issue it is on plastic slides

Super. Auch alleine einfach zusammen- und anzubauen. Ziemlich schwer das Teil hat über 7 kg also stabil. Leicht ausziehbar, fraglich ist nur wie lange die Kunststoffführung halten. LG :)

Gracias a esta bandeja, no tengo que dejarme los hombros en mi mesa (demasiado alta). Es robusta y tiene varias opciones de montaje, por lo que puedes ajustar la altura según te convenga.

I purchased this with the same manufacturer's L shaped desk. This will fit wonderfully if you don't plan on mounting it at an angle. I needed it at an angle though because my monitor is wall mounted in the corner above the desk though. In the end I mounted the slide rail backwards with one of the "rear" feet turned to the side at the front so it would allow it to be functional despite not being the intended mounting. This allowed me to get 2 screws through each foot into the desk (also advise drilling pilot holes for the screws so they don't plow out the top of your desk.) I'm confident that if I had mounted the unit parallel to the desk that it would have cleared the bracing under the desk as the manufacturer intended. If you are purchasing this to mount to a desk that isn't made by this manufacturer I'd advise doing a mockup before attempting to mount a single thing so you can send it back if needed. The nylon sliders make enough drag to keep the tray from sliding while gaming but allow low resistance when you slide the tray back under the desk for stowage between uses. It is reasonably stout in its construction and can handle a decent amount of weight though I wouldn't try to support a 4yr old on it. It will definitely support the weight of whatever keyboard and mouse/trackball setup you are using and should offer a reasonable service life. You receive extra sliders in the hardware kit so you can replace the first set of worn ones should you finally wear them out. The wrist rest also functions as a stop to keep the keyboard from sliding off the shelf if you happen to set it at more steep of an incline. The unit is slightly overpriced for what it is and the fact you have to assemble most of it yourself and the directions are not the most descript. It is still a solid option if you're in the market for a sliding keyboard tray that's wide enough to house a mouse as well.

The good: * Sturdy * Extra wide and can have a Logitech G613 gaming keyboard with enough space left for my mouse. * wrist rest is nice and firm The bad: * the slider mechanism (or a lack of) is terrible. once assembled,it's difficult to pull the tray out or push it in. this is because id doesn't actually run on a ballbearing slider mechanism. it's just metal on a metal rail so with the weight of your hands, keyboard, mouse and weight of the tray it makes it difficult to slide it in and out. I'm still keeping it as it's really wide and I can deal with difficulty in pushing or pulling but others might be put off by it.

This product was purchased with some caution. However, it comes packaged with extra braces and screws for different types of desks. I was hesitant and concerned it would not fit my Sit Stand desk as it has a massive mount in the middle with the powerpack. This suits it perfect, and it holds a lot of weight at 3kg and is big enough for an extra large keyboard and large ergonomic trackball. I love how it fits, and it easily slides under my desk. The only negative drawback is that the twist lock is rather tight and springs up very quickly and if you are too slow you can get your fingers caught in the top. i just gently hold the front of the table and I can adjust it quickly.