PMXU43BT

Outstanding unit simple to use great sound vocals and music, I've purchased several of these work great with powered speakers. Also purchased a Pyle mini hum eliminator. This combo works great. I've been doing Karaoke almost 20 years used many different setups this the Best most compact easiest system I have ever used. The hum eliminator is the icing on the cake. Wiring in some locations is subject to ground loop static hard to eliminate this combo thru a laptop works perfect. One caution turn all your equipment on before powering your laptop so all equip will be recognized by the lap top

I use it to DJ, connecting by USB. Easy to control individual sound levels. Great to have equalizer on each input. I've also connected wireless microphone. And I have option to connect phone by adapter, so just enough channels for my need. Feel well constructed, not cheap plastic feel. Some feedback. The included USB cable can be a bit short sometimes but easy to buy a longer cable. The power cord however could be a few feet longer. It's a custom cord so need an extension cord. When using PC/USB, LED will light up even when mixer powered off. This can be misleading, I thought it was on and working but no sound only to realize the power switch was off.

I've only had this mixer for a couple weeks, so this is a short-term review. I'll update it if I have any issues down the road. TL;DR: Great, affordable mixer that's perfect for anyone who wants to start podcasting, recording, or live-streaming. Beware of a couple issues. I'm fairly new to the world of audio mixing and editing, but it only took me about an hour to completely figure this mixer out. It's laid out very simply, and after playing with it for a little while just about anyone will be able to use it. Here's some pros and cons: PROS: - Can use phantom power, providing *both* mics +48V - Includes a neat 16-setting reverb FX option - Has a near zero-latency headphone output for easy monitoring - Sturdy build, removable/replaceable knobs - Clever mic input connectors that allow you to connect either XLR mics or 6.35mm (1/4") plugs. It's hard to tell in the product images, but the center of each XLR connection is a 6.35mm jack. - Simple - No bundled software or firmware updates. Just plug and play. - USB interface with media control keys. Allows for input AND output from a PC simultaneously. Perfect in combination with Voicemeeter Banana or similar mixing software. - Bluetooth connection for playing music from a phone. I didn't get very good sound quality over BT, but that's to be expected. CONS: - No mic mute buttons. If you want to mute your mic, you'll have to use a switch on your mic (if you have one) or turn the level knob on the mixer all the way down. It's a disappointing omission that had every right to be there even on a semi-budget device like this. - The USB interface has a couple bugs, one of which is fairly serious. I tested it on a couple different Windows PCs (I didn't test on Linux or OSX, they may be fine) and got the same result: while on PC mode, the mixer continually turns the volume up on your computer. I don't really care about the volume since I leave it at 100% all the time and control it through software, but the mixer forces the Windows volume overlay to stay on the screen while it's plugged in. This can get really frustrating, especially if you're listening to music (the music overlay in windows is massive). If you don't like your volume at 100%, this bug may be a deal-breaker. Overall, it's really great. However, if those two issues are a problem for you, you may want to look at the offerings from Behringer, Yamaha, and other such brands. Which is not to say they're better - in fact most of them are more expensive and have less features. Just keep in mind that they won't have the same issues.

Bought this a while ago and forgot to review. I'm a solo acoustic player. I bought this for a regular gig I had that requires a ferry ride and shuttle to the venue and back. The venue provides only a powered speaker. I needed something with very basic effects that was small enough to travel with on foot and boat. This did the job, performed exactly as expected, maybe a little better. The Bluetooth connects easily and reliably for break music. And it puts out just enough power to play a small outdoor venue without overdriving any of the inputs. Negative reviews about the sound quality are pretty accurate. It's not great, but it's above the quality that I would've expected at this price point, so if youre a working musician or DJ I would only recommend this in a niche situation like I used it.

I perform in a band and need this to mix my monitor. I need three feeds - one for my guitar, one for my vocals and one with a mix of the rest of the band. I need independent control of each and I vary them throughout a performance. I had a mixer that would do it, but that didn't have enough gain on each of the inputs. This Pyle mixer has gain on all three inputs so I can easily find the balance I need for any situation. This mixer has features that I'm not using yet but that could be interesting. There's actually an aux out separate from the main out with separate aux mixing. There a control room out and headphone out. There's an effects out and an effects return. A lot of features for a little mixer. You can use the effects return as a tape in if you get the right adapters to a 1/4" plug. Edit: I still use this as a mixer for the stage. I might even buy another for another purpose. But, I recently tried it as a recording interface, where I want two inputs to this mixer, instrument and band mix, and then the instrument out to aux and a mix of instrument and band out to headphones. It's almost perfect, the only catch is that the aux out is post-fader. The warning in the manual is, "Please note, the single (sic) level will vary with the different setting of the channel attenuator." This is Chinese-English for, "if you change the channel volume in the main mix to your headphones, you're changing the volume in the aux send to the recording interface." When the musician is listening to headphones and mixing a balance of instrument and band, you can't let the musician change the instrument level. The musician has to change the band level and/or the headphone level, otherwise the signal level going to the recording will change. The recording engineer will not like that. TL;DR: The aux send is post-fader, not pre-fader.

Good product for the value. Digital FX is ok, if you need more sophisticated FX you need to invest in higher end devices, but this one works ok for a couple or mics and instrument (keyboard). Bluetooth connectivity is very convenient.

Every so often, the device starts seriously garbling output (switching on and off several times per second, for example) or halting output completely. The device has to be disconnected from its usb input and powered down to fix the problem. I've not had it happen during a session yet, but it's going to be a pain when it does. It's something of an overstatement to use the word "stereo" with this device. You have no balance control whatsoever. It does have one stereo input (channels 3 and 4), but if you wanted to add a second stereo channel by using lines 1 and 2, note that the balance (left/right-ness) of those inputs will not be preserved. Both channels will be mixed equally to both outputs. There is no capability in the mixer to affect balance, so you cannot, say, split an incoming stereo signal to deliver the left channel to input 1 and the right channel to input 2, then set the stereo destinations for those channels to left and right. This device is not a workable solution if you need to mix 2 stereo sources. If you're trying to overlay multiple mono inputs on a stereo signal, you will not be able to put either of those instruments off-center. Everything will sound like it's coming from inside the listener's head. I wouldn't be so annoyed about it, except that the description contains the line, "1/4’’ Mono + Stereo Inputs". Note the plural on "Stereo Inputs," which is suggestive and misleading.

Received as described,Compact Size, good quality and works great.

El producto en sí viene fabricado con materiales de calidad, sus partes se ven bien ensambladas y ha funcionado adecuadamente, de hecho la he usado un par de ocasiones y he quedado satisfecho con su funcionamiento, cumple con lo que ofrece, creo que una de las pequeñas limitantes que traen este tipo de productos es que sus canales para conectar un dispositivo como auxiliar es en mono, pero aún así me parece aceptable y en cuanto a sus demás funciones, considero que vale la pena y en comparación con otros productos me parece que su precio es justo, lo recomiendo para quienes empezamos a adentrarnos en este ambiente de mejorar la calidad del audio en nuestros proyectos de este tipo. Lo recomiendo y más adelante volveré para actualizar mi experiencia con el uso de este producto.

Garbage, messed with it for hours and can't get rid of the humming and overall terrible sound quality, switching back to my old mixer. It keep on stopping sounds too. And not same as expected hope to get a refund

Es un buen equipo para el hogar, excelente sonido y facil demanejar.

Todo excelente lo único que no me gusta es la entrada de corriente ... Ya que no puedo ponerle cualquier otro cargador ... Es el único inconveniente por lo demás está súper bien

Excelente producto y cumplen con fecha de entrega