6 String Metal Solar PV Combiner Box with 15A Rated Current Fuse

Updating my review - after reaching out to the seller for help, he suggested linking my panels in series and running all 6 through 1 port and my voltage shot up as expected. Definitely appreciate the support and follow up from the seller. The boxes are built well with quality components, just understand that these units will parallel all panels so if you need higher voltages to trigger your charge controller you can get by with the 4 port box, as you will need to link the panels in series --- I bought 2 of these powgrow 6x panel combiner, unfortunately neither one works properly. I have all panels volt tested at the cable input, but the boxes do not combine the voltage, I just get a little 19V out of the breaker. If I shut the breaker off I can see 67V but as soon as I flip the breaker on it drops to a universal 19V. My 2nd box is the exact same way, it's like it picks 1 input then uses that as the voltage output and does not combine the power output.

Works well for what I needed

I have had the controller box setup out in the Florida weather (hot direct sun) for almost a year with no problems. It appears very well made with heavy wiring and solid connections. I only have three solar strings attached right now but its nice to know I can add more as I need them. I would very much recommend this box.

The box is ok. Not Shure of fuse holders quality. My complaint with this set is in the main breaker to the controller. It isn't the best has poor wire connectors. If you don't get the + wire going out just so the tightening nut will miss making contact so you will get no connect to your charge controller. We spent hours trying to figure out why it would not wake up our controller. Only by accident did after much hair pulling did we figure it out by loosing and moving work a bit did it make contact. Yes it is working now but I have never seen such a poor wire conect so be warned of this and maybe the quality of the rest of it. There was a review that said he could not get the breaker connects to hold tight. I think it is because there badly made.

Good product