3 Model B Quad Core CPU 1.2 GHz 1 GB RAM Motherboard

The new model (RPi 3) is much faster than its predecessors. Indeed, it’s 10x faster than RPi 1, and double the speed of RPi 2. Now with integrated WiFi and Bluetooth 4.1 which deliver flexibility in siting the Raspberry Pi, and make it more attractive as a set-top computer, a video server, game emulator, and infinitely more. This thing screams! The performance is amazing on this tiny thing! I am not commenting on the price by this seller. Yes it's over MSRP, but that's the price for getting it overnight vs standing in line and not getting one because it's sold out. This is just a review of the product itself. — The measurements are identical to the Raspberry Pi 2, which is great since all of your accessories will work perfectly. The RPi 3 includes the same 40-pin GPIO header which allows for extensions into the real world. Blinking lights, motors, talking robots, etc. Same CSI and DSI interfaces to enable camera and display modules. Same as RPi 2, it includes an HDMI out to view on a TV or computer monitor. But it can easily be set up as headless (no display). The 802.11a/g/n is provided by the BCM43438 chip, which also provides Bluetooth 4.1 capability. IMPORTANT! Keep in mind to get things running you’ll three things 1) a microSD card (8GB or larger; class 10) 2) a computer to flash the linux operating system into the microSD 3) a USB keyboard+mouse 4) 2amp micro USB power supply. Performance is killer on this thing. Booting is incredibly fast and I can’t wait to overclock this little desert. It runs at 1.2GHz (64-bit quad-core ARM Cortex A53). It boots faster, it runs faster, it responds faster. With the integrated WiFi + Bluetooth, you no longer need a USB hub for all your devices. A bluetooth keyboard/mouse will not take RPi 3’s precious USB ports. You’ll have them open for any peripheral you wish, hard drives, microphones, printers, etc. Good: Price Quality of build Easy of use (assuming you’re techie) WiFi + BLE support Much faster processing Price, again! The wishful thinking Wish the micro SD card was spring loaded Wish it had more on-board LEDs for debugging.

Raspberry Pi 3 Model B 1.2 GHz Quad-Core ARM Cortex-A53 Motherboard - Green Sold and dispatched by Amazon £32.95 If you are considering buying a Raspberry Pi for a project, buy this latest Raspbery Pi 3 instead of the old versions. The features include:  System on Chip (SoC) : Broadcom BCM2837  CPU: A 1.2GHz 64-bit quad-core ARMv8  GPU: Broadcom Video Core IV  RAM: 1GB LPDDR2 (900 MHz)  Networking: 10/100 Ethernet, 2.4GHz 802.11n wireless  Bluetooth: Bluetooth 4.1 Classic, Bluetooth Low Energy  Storage: micro-SD  GPIO: 40-pin header  Ports: HDMI, 3.5mm audio-video jack, 4×USB 2.0, Ethernet, Camera Serial Interface (CSI), Display Serial Interface (DSI) The key difference compared to the old versions is that the Pi 3 has on board Wi-Fi! No need for a wireless dongle to connect the Pi to the internet. Although you may not require Wi-Fi, it's best to invest in the Pi 3 because you may need it in the future. I have used the Wi-Fi and it's just like connecting a laptop to the internet- Find the network and connect and then enter the password. Simple and easy. Some reported that their Pi gets hot, even in idle mode (when it’s not doing anything). That is not the case for me- it’s just warm in idle. There are other things to consider such as a case and other components. SD card with an operating system such as Raspbian is a MUST (downloadable on official Pi website). This is not included so I recommend getting a SD card - minimum of 16gb, as approximately 4GB is taken up by the operating system. If your project requires you to save pics and vids, then probably 32gb would be idea. The Raspberry Pi will require a power source, which is NOT included. This can be either from the mains plug to micro-usb (e.g. Samsung S4 charger) or from a laptop/pc USB to micro-USB. I have used my smartphone charger to power up the Pi and it works perfectly. I have also used an external power bank and it works. I would definitely recommend using a mains plug to ensure that the Pi gets enough input, especially if your project is quite demanding. Other basic things will be required such as a mouse, keyboard and a monitor. And yes, it will work on a TV (if it supports HDMI). I have purchased a case (suitable for Pi 2) and I see that my Pi 3 fits in perfectly. Be aware though that some Pi 2 cases may not actually fit on Pi 3 (read reviews from buyers). It’s a great product and I was actually surprised how small it is when it was delivered. Secondly, I was quite worried that I received a second-hand product because the Raspberry Pi was wrapped in an anti-static packaging seemed like it was open (one end was cut off). I then found out that the wrapping is meant to be like that. It also came in an official/genuine box. I cannot stress the fact how important and helpful the online materials are. I personally wouldn't have a clue what to do. There are online tutorials such as ‘how to’ set a Raspberry Pi up for the first time, inspirations, setting up SD card, etc. This small beast can accomplish anything! Great product and I recommend it. Any questions regarding about this item, please leave a comment and I'll try to get back to you ASAP. I would really appreciate it if you marked this review as helpful or not so that I can improve my future reviews.

I bought this Raspberry Pi mainly to use it for home automation as I saw in lots of Youtube Tutorial Videos, but also to see what it could do further than the Arduino. It came within 4 days in a small box, along with a quick start guide, explaining how to quickly install a GUI, and a safety guide. The raspberry pi itself was in a relatively stiff paper bag, probably to protect the I/O pins and the connections from being bent during transport. This model of the Raspberry Pi includes on-board Wi-Fi and Bluetooth, but if you plan on using the Wi-Fi functionality a lot I would use the Ethernet connection is the Wi-Fi is sometimes a bit flaky, fixed with a reboot of the system. The Raspberry Pi is easy to use, from any age above 9 - if you are not confident with coding you can install a Graphical User Interface or if you are confident you can use the terminal itself. There are many resources and instructions online if you need any help. The only problem I have is that whenever I boot it up there is a small, yellow lightning bolt in the top right corner, symbolizing that the power from the Micro-USB connection is too low. I have tried multiple USB power supplies and cables, as well as using a powered USB hub for the peripherals, but it remains there. Despite this, the functionality is the same, and it still works perfectly. I would certainly recommend this to anyone interested in computers or programming, because it provides a great start with all the things that this small device can do. This device is well worth it’s price (£31.99), and I would buy one again if I had another project to work on. When buying this, remember to make sure you have a micro USB power supply (a mobile one should work fine) and a micro SD card with a minimum capacity of 8gb, although preferably 16gb, because the Raspberry Pi needs those to function. Make sure you also have some sort of computer with you with an internet connection to download all the setup files needed.

great

This is the 5th Raspberry Pi B 3 that i am purchasing (yes, after 5 days of waiting for it to be despatched, i have not received it yet). Altogether, it is an amazing board with many possibilities and many optional extras that will add to its capabilities. there is a common problem with almost all of them though, I will bet you that once you receive your board, you will find that either one or more of the USB socket(s) or the Bluetooth chip, or the wifi chip doesn't work and after sending it back 2 or 3 times, you will learn to compromise. I think the best compromise is to keep the one with a faulty USB socket and try to remedy the problem by buying a hub. dont let this stop you from buying one though because you will (if bought from Amazon) eventually receive it. The main beef is not with the board but with Amazon's dirty tactics. they want people to join their Prime program and for many people it is probably a good program saving them a lot of money during the course of their membership but i do not buy frequently enough to take up a Prime for a free next day delivery and as such, this is the 5th day since i ordered some stuff (all available) and am still waiting for them to be despatched. I remember and miss the days when buying from Amazon didn't come with a built in frustration period but hey, someone in Amazon believes that a quick jump in their profits will outweigh losing customers.

This is my first Raspberry Pi. Very impressed so far. You can buy a bundle with everything you need but I found it was cheaper to buy everything separate - even going for a bigger SD card can save you money compared to buying a bundle. I am using this as a media center and a quick web server for testing, a few things to note: - very easy to set up and get going. Good guides on the Raspberry Pi website to help you. - OSMC is a great front end and makes it a very capable media player. Attaching an external hard drive is simple and OSMC displays your media in a brilliant, clean and easy to use front-end. - Can control it via the TV remote! (This may only work for certain make/models of TV but on my Samsung it is fine). - Very easy to wipe and start again if you do anything wrong. A quick format of the card, put the NOOBS software back on and start again. - OSMC comes with various scripts to automatically set up sharing (so you can access your SD card or external drive via your windows or mac PC via Windows Explorer/Mac Finder - this is a very simple process) - setting up Apache to run your own little webserver and testing stuff out just requires a few commands to be typed in but is reasonably straight forward and quick to do. Things that didn't quite go right: - I had several FAT errors when booting up the first couple of times. Turned out this is a common-ish issue with SD Card readers built into computers - when I used an external card reader to format and set up the SD card everything worked fine. - There are loads of tutorials/guides on-line which can be really helpful but as there are different versions of the Raspberry Pi and different versions of the software you can put on (as well as different versions of Linux they are all based on) you can read conflicting and confusing advice and not everything I followed worked first time. Like anything if you are patient, prepared to try a few things, and remember to back up any important files before making any changes you'll get there in the end! I'd recommend one of these! (Am already thinking about how I could use another...)

works OK came very quickly Thanks

Compared to the RPi2 that this replaced, it is a revelation. Having Wi-Fi built in was immediately recognised by the NOOBS card, and gave me a huge choice of OS's I could install (not just Raspbian) making setting up LibreElec a breeze. The speed on this thing blows the RPi2 out of the water (though I had overclocked the 2 to 900MHz, there is still no comparison). The range of the Wi-Fi is limited, but then the "aerial" is a tiny component on the board, so no surprises there. However, as long as your expectations are realistic, it won't be too much of an upset. Unfortunately, they have dropped the "push in, push out" micro SD slot - this was a welcome feature on the RPi2 as it was great for switching over cards if it was encased - now, tweezers seem to be an essential addon! Be aware that this uses more power than the RPi2 (a proper PSU is recommended), and there is also a chip underneath the board that benefits from a heatsink (this may affect any case you currently use) - also, the position of the LED's has moved on the board. The mounting holes are in the same position, though. Bluetooth is also built in, but seems to be disabled by default - I have left it this way, as I can't find a use for a bluetooth connection, but I feel sure others may benefit. In short, definitely a worthwhile upgrade - highly recommended.

So small and compact

Werkt oke ben tevreeden😊

Ho acquistato questo Raspberry Pi 3 Model B nel 2021 e dopo quasi cinque anni di utilizzo posso dire che è stato uno degli acquisti tecnologici più versatili che abbia fatto. L'ho utilizzato per diversi progetti, tra cui server domestico, automazione, emulazione retro gaming e piccoli servizi sempre attivi. Nonostante l'hardware non sia più di ultima generazione, continua a svolgere egregiamente il suo lavoro con consumi ridotti e un'ottima affidabilità. Il Wi-Fi integrato, il Bluetooth e le numerose porte disponibili lo rendono ancora oggi una soluzione molto flessibile. La comunità Raspberry è enorme e questo facilita molto la configurazione e la risoluzione di eventuali problemi grazie alla grande quantità di guide e software disponibili. Pro: - Molto affidabile anche in funzionamento continuo H24. - Consumi energetici ridotti. - Wi-Fi e Bluetooth integrati. - Tantissime possibilità di utilizzo e personalizzazione. - Ampio supporto software e grande comunità online. - Dimensioni compatte e assenza di rumore. Contro: - 1 GB di RAM può risultare limitante per applicazioni moderne più pesanti. - Le porte USB sono solo 2.0. - Richiede alcuni accessori aggiuntivi (alimentatore, microSD, case) non inclusi. - Non adatto come PC principale per attività impegnative. Nel complesso, anche dopo anni di utilizzo, continua a funzionare perfettamente e si è dimostrato un dispositivo estremamente affidabile. Lo consiglio a chi vuole imparare, sperimentare o realizzare progetti elettronici e informatici senza spendere una fortuna.

Etant profondément geek dans l'âme, cela faisait longtemps que je souhaitais acquérir un Raspberry sans toutefois avoir le temps de m'y mettre pour de bon. Puis je me suis finalement laissé tenter dernièrement... Quel bonheur ! Pour moins de 35€ le matériel est complet, fiable et diablement efficace. Les utilisations sont quasiment illimitées, c'est d'ailleurs là qu'est le problème car on a envie de tout tester avec ce petit bijou. Pour ma part je l'ai acheté à l'origine pour faire un serveur de streaming médias avec Plex sans interface graphique. en moins de 2 heures tout était configuré et parfaitement fonctionnel... limite frustrant ! J'ai fait joujou avec et ai installé une vieille caméra USB pour faire de la vidéosurveillance... fonctionnel en quelques minutes Grrrr. En voulant toujours plus, je me suis donc mis à la domotique avec des modules Fibaro et une clé Contrôleur USB Z-Wave+ Everspring qui a été parfaitement reconnue et fonctionnelle sous jeedom sans aucune configuration. Mon raspberry a donc 3 fonctions bien utiles à l'heure actuelle et il tient parfaitement le coup sans aucune surcharge. J'en parle beaucoup autour de moi et ai convaincu un ami qui voulait une borne d'arcade. Il en a donc acheté un et a fabriqué une borne en médium avec un vieil écran de pc. J'ai installé Retropie sur le raspi, encore une fois tout fonctionne impeccablement, il est ravi et suscite la jalousie de tous ses amis. Petit conseil: n'hésitez pas à ajouter un ventilateur en plus des dissipateurs thermiques pour une utilisation en borne d'arcade car cela consomme beaucoup de ressources et le raspi chauffe vite. Le raspberry est également idéal par exemple pour se familiariser avec Linux (ou tout autre système d'exploitation d'ailleurs, une bonne dizaine sont disponibles dont une version de Windows). Sinon on peut installer une distribution spécialisée dans une fonction. Pour ma part je reste sous raspbian qui me permet de multiplier les fonctions. Pour information j'ai acheté en même temps le kit Aukru pour RASPBERRY PI 3 Model B . J'en achèterai assurément à nouveau, que ce soit un Pi3 pour me faire ma propre borne d'arcade ou un Pi Zéro avec un module caméra pour faire une caméra IP autonome à moindre coût. Edit 21/02/2018: Jeedom (...et Plex) entraînant rapidement énormément de cycles lectures/écritures sur la carte sd, j'ai déplacé le système sur le disque dur externe avant qu'il ne soit trop tard et que la sd me lâche. Depuis mi-2017 la fondation Raspberry a inclut cette possibilité et la démarche est plutôt aisée (plusieurs tutoriels sont disponibles sur le net). En gros, il faut effectuer un premier démarrage normalement avec la carte SD, programmer la puce interne (OTP) pour un boot sur USB en ajoutant la ligne "program_usb_boot_mode=1" dans le fichier "config.txt" qui se trouve sur la partition de boot accessible sous Windows, vérifier la bonne prise en compte par la commande "vcgencmd otp_dump | grep 17" => la réponse doit être "17:3020000a" sinon KO. Si OK, il ne reste plus qu'à effectuer une nouvelle installation de Raspbian sur le disque dur en utilisant "Win32DiskImager" par exemple.Et voilà plus de problème de carte SD ...car plus de carte SD ;-) ! En espérant sincèrement que ce commentaire saura vous guider dans votre achat. N'hésitez pas à cliquer sur commentaire "utile - oui" si tel est le cas ;) Merci

Escolhi a Raspberry como a placa para iniciação no ramo de eletrônica. Apesar de alguma complexidade, a ampla disponibilidade de tutorias e projetos exemplo (principalmente os disponibilizados no site oficial) com diferentes níveis de dificuldade, desde iniciante até avançado, fazem desta uma excelente opção tanto para iniciantes como para os que buscam algo a mais. Layout rígido e soldagens firmes. Apenas a conexão HDMI me pareceu um tanto frágil e requerendo um cuidado adicional na conexão e remoção de cabos a fim de evitar quebras de solda e mal-contatos. Recomendo