Spigen S350 Compatible with Apple Watch Charger Stand Apple Watch Ultra 3/2/1 49mm, Series 11/10/9/8/SE 46/45/44/42/41/40/38mm - Black

I’ve found this Apple Watch stand to tick all the boxes required for a great stand/storage solution when the watch isn’t in use (primarily at night), offering superb value for money. The design of the stand makes it perfect for viewing the Apple Watch in ‘Nightstand’ mode with a sticky, non-slip base making it secure to leave on a flat surface overnight without having to disconnect one of the watch strap ends. The set-up of the stand could not be easier with the Apple Watch charger simply slotting into the back of the stand. The colour complements the colour of other stands and my space grey Apple Watch Series 4.

This charging dock is nice and small, Does not take up much room on my bedside unit. It is made out of high quality silicon. The charger fit snug in the the pre-cut out hole. There is a small piece of rubber that comes with the dock which is needed for the 38mm watches to move the watch unto the height the for charger but then the magnet on the charger is strong enough to support the weight of the watch any way, but it is a nice touch to the dock. On the bottom of the dock there is a stick pad that is very strong and helps to keep the dock in on my bedside unit. If you really wanted to stick this sock to a wall or side of a unit and it would easy hold its weight and with the watch charging on the dock.

His is a wonderful bigot kit. Really good value for money and is exactly what Apple should have supplied as standard equipment with the arch. My mag. Badger was always turning over, moving around and sliding off my bedside cabinet. With this the original charger clips into the upright support and is held steadily in place. There is a sticky pad on the bottom of the unit to secure it to the surface you rest it on, although I have chosen not to remove the protective film so you have options. I would highly recommend this to any owner of an Apple Watch up to and including series 6, I understand series 7 may convert to usb c

This product is pretty good for what it is - a charging stand made from TPU that allows you to use an Apple Watch in nightstand mode. It has a pad on the bottom that seems to grip the surface of the wooden set of draws next to my bed strongly, but can also be removed if you want to. Why not 5 stars? Well, while I imagine most watch bands will be able to be done up (looped) around the stand, not all can. I recently purchased a thick (5mm) leather band and put it on the stand (I thought, as usual) and woke up the next morning to find my watch completely dead - I hadn't noticed when I put it on the stand in the dark that thickness of the band had pushed it away from the charger, resulting in it not being charged at all (and running out) that evening. So, all in all - a good stand for most, but be sure to double check that your strap being done up doesn't push the watch away from the charger. Personally I've avoided this issue by not doing that strap up any more when on the charger and just letting the band pieces hang out to each side. Note: I purchased from Spigen UK Store (fulfilled by Amazon), it was sent in a jiffy bag and the product box arrived pretty damaged - though this thankfully did not effect the product inside.

Perfect so far! A small and smart way to charge and keep your Apple Watch protected. I wanted something that didn't take up much desk space and kept the charging cable out of the way while also protecting my watch. I must say that for the price, this does so perfectly and so much better than I initially expected. I spent quite some time looking into different Apple Watch stands and I'm glad I took the gamble and went with this one. It's more than half the price of some of the others and exactly what I needed. Set up is very simple and there is a silicone pad that sits where the watch will rest for added protection. So there's no risk of your watch getting scratched which was one of my concerns when buying a stand for my watch. The Nanotac Pad that keeps the stand gripped to your desk works great. With this, your stand won't budge it's accidentally knocked or the charger wire is pulled. The stand offers great all round protection so it is very unlikely that the watch will fall off and if like me your wires are behind your desk, then it tucks away nicely. One cool thing I found is that the Nightstand mode on the watch works really well with this stand. Before I bought this stand, I didn't use this feature as I didn't feel comfortable just leaving my watch on my desk incase it dropped or got scratched. But if you tap either your watch or the stand itself while it is resting, it will show the nightstand mode as shown in my picture. It won't fall off when you tap it either which is great. So if you're looking for something small that offers great protection and also looks nice on your desk, then you can't go wrong with this.

I own the Apple Watch 42mm and I always use the alarm on the watch. Without the dock, the watch vibrates on the nightstand when the alarm goes off which is horrible to wake up to! Also, the charging cable for this watch is super long! So when not in use, the cable just hangs on the edge of the nightstand and often ends up on the floor with a risk of damage or me tripping over it! So I decided to buy this dock to help solve both issues. The quality of this dock is awesome and is made of strong rubber. Yet it isn't one of those sticky rubber materials! Spigen products have always been high quality. The charger fits on to the back of the dock perfectly and the watch can be easily slipped in to place to charge. For the price and quality, any Apple Watch owners should get one of these!

I owned an apple watch stand previously which cost three times the price of this Spigen stand and it was totally rubbish. The charge puck would constantly pull away from the stand every time I removed the watch. I then stumbled across this product and thought I'd give it a try considering the low price. I am amazed at how well it works. The base sticks firmly to most surfaces and the puck sits firmly once inserted. If you move the stand to another surface, then you just need to clean the base with a damp cloth before pressing it down on the new surface. It's also aesthetically pleasing. It works with all Apple watches including the larger Ultra which I purchased recently. I highly recommend this product. I can't think of anything I don't like about it. I've never been let down by Spigen. I have a Spigen Magsafe case on my phone which is amazing as well.

Brilliant stand for my apple watch! 1) It is a lovely colour and looks great on my dressing table 2) The apple watch fits perfectly on this stand. The stand works for both the 38mm and 42mm watch. I have the 38mm watch and it came with a little rubber sticker to place where the watch face will sit to help lift it up so the charger is in the right place. 3) You can use the watch as a night stand when it is on this stand, without having to pay for an apple one! 4) There is a sticker on the base of the stand so you can stick it down onto any surface so it will not move. Overall would really recommend this item to anyone with an apple watch!

Ich habe die Ladestation für Apple Watch des Herstellers Spigen zum Testen zur Verfügung gestellt bekommen was jedoch an meiner objektiven und kritischen Bewertung keinen Einfluss hat. Geliefert wurde die Ladestation in einem Karton und darin in einer weiteren edlen Karton- Plastikverpackung. Nun zum Test: Nach dem Auspacken fiel mir auf, dass es sich bei diesem Produkt nur um ein wertiges Produkt handeln kann. Die Verarbeitung ist sehr gut und sieht auch nicht nach einem 08/15 Produkt bzw. Billigprodukt aus. So wie man es eben von diesem Hersteller gewohnt ist. ;-) Im Lieferumfang enthalten ist zum einen die Ladestation ans sich, ein Silikon Pad sowie weiters eine Gebrauchsanweisung in englischer Sprache. Ich bin ein großer Fan von Neuerungen am Technikmarkt und war deswegen sehr froh, dass ich diese Ladestation testen durfte. Zu allererst muss man das Silikon Pad von der Folie abziehen und anbringen. Dann kann auch schon das Ladekabel welches bei der Apple Watch mitgeliefert wird in die Halterung eingebracht werden. Zu guter letzt wird noch die Apple Watch eingesetzt. Das Material aus welchem die Halterung besteht ist aus hochwertigem und kratzfestem TPU was ich als sehr positiv empfinde, da man nicht fürchten muss, dass die Apple Watch an sich irgendwelche Kratzer oder Schäden abbekommt. Die Halterung an sich ist komplett in schwarz gehalten was meiner Meinung nach sehr elegant und edel aussieht. Schade, dass Apple so eine Halterung nicht in die „Standardzubehörliste“ der Apple Watch aufnimmt. Ist echt ein super Produkt, sehr klein und sehr praktisch. Ich habe das Produkt kostenlos für diesen Test bekommen, was jedoch keinen Einfluss auf meine Bewertung hatte. Fazit: Die gute Qualität der Halterung und das Preis- Leistungsverhältnis von nur € 15,99 haben mich sehr davon überzeugt es auch anderen Kunden weiter zu empfehlen. Es ist absolut seinen Preis wert. Gerne wieder. Top Hersteller, top Produkt! Von mir gibt es gerne 5 von 5 möglichen Sternchen.

Very simple and easy to use overall I'm satisfied

Good product

I bought this as a way to manage cable clutter and charging for a 41 mm Series 7. It works perfectly. The magnet maintains full contact magnetic overnight, and the watch fully charges. A prior review indicates (incorrectly) that the watch slips off the magnet/charger. Nope. The stand comes with a thin strip of adhesive foam to add to the base, to support the lower edge of the smaller 41 mm watch. The watch does appear to sit/slide a bit lower than full center of the charger, but it maintains full magnetic contact and charges fine. I wondered about this based on a prior review before buying this, but I figured I could find some tape or foam to add thickness to this support strip if I had to, but it was not necessary. The charger clips solidly into the stand. The stand has adhesive on the base. I stuck it to a little square sample of quartz kitchen countertop I had on hand from a prior kitchen reno (3" x 3" x 1/2'). It now has a classy little quartz pedestal, with enough heft to stay in place on my night table, and I can move it around when necessary.

Das Laden der Apple-Watch ohne Ladestation empfand ich immer äußert umständlich. Hierbei ist es mir oft passiert, dass ich die falsche Seite des Ladegerätes verwendete und so der Ladevorgang nicht startete. Dies sollte mir mit Ladestation nicht mehr vorkommen. Trotz ihres doch recht einfachen Designs war ich von der Ladestation angetan. Die Watch ist sehr einfach anzubringen und auch wieder herauszunehmen. Gleichzeitig wird die Uhr durch ihre Position in den Nachtmodus versetzt und ermöglicht a daher auch in der Nacht ein angenehmes ablesen der Uhrzeit. Das Ladekabel der Apple-Watch ist leicht zu entfernen, sodass es für eine Reise (o.Ä.) leicht ausgebaut werden kann, ohne hierbei die komplette Ladestation mitnehmen zu müssen. Den Kauf der Ladestation kann ich daher bedingungslos empfehlen. Ich habe nun die Station auch in rose für meine Freundin bestellt. Etwas negativ ist hierbei, dass das Ladekabel der Watch weiß und die Station selbst rose. Das wirkt rein optisch unschön. Dies hätte mir aber durchaus vorher bewusst sein können und kann daher nicht dem Produkt zugeordnet werden. Erneut bestellen würde ich jedoch lediglich die weiße Version. Pro: - Preis - einfaches Design - nach einem Jahr Nutzung keine Gebrauchsspuren Contra: - andere Produktfarben wirken mit weißem Ladegerät unschön