JETech Screen Protector for Galaxy Tab S8/S7 11", 2-Pack

Update - a year on, with a mischievous Sprocker pup on the loose, plus a good few knocks whilst working, it appears that all that's suffered is the screen protector. Whilst I doubt it "protected" the screen from physical impact, it certainly did take a few deep scratches. Time to try and remove it and replace it. No idea how I'll get it off! Still highly recommended. Ahhh, screen protectors. I've never really bothered with them since my first smartphone. Horrible, draggy, gummy things. Hated them. Guess that was the early days though. I recently bought a Tab S9 Ultra, and this screen protector looked neat and unobtrusive. Fitting did look like a absolute pain though, especially over such a massive screen. So, first of all, I didn't use the included screen wet wipe. I just used isopropanol and kitchen towel to thoroughly clean the screen. I then used the included sticky strip to get rid of any physical dirt or debris on the screen, which is apparently absolutely vital. You can see in my photos that my puppy dog was *very* involved in this process, and the sticky pad lifted a good few hairs off the screen following the isopropanol wipe. The came the frame. Fitted nicely after snapping the corners in well. No idea how someone mangled their tablet with such a light wee frame... Applying the glass was dead easy. Fitted right into the frame, and fitted onto the tablet perfectly with no effort. Look at the photo around the camera lenses to see the accuracy of the frame fitment. The frame also came off with no effort at all - I'd have had to do it with a hammer alone to cause any damage... There were huge bubbles. I worked them out using the very soft "squeegee" supplied - first from the inside out, then got rid of the bubbles at the side which seemed to suck the others making them easy to eliminate. It took me ten minutes in all. It's a flawless fit, with no bubbles or other imperfections. The touchscreen works as it did before, and, crucially, feels just as it did before. So, for all those bad reviews out there, maybe I got a better batch than you did. Maybe, however, I did a better job at being very clean when bonding glass to glass, understanding that absolutely any imperfection will result in abject failure. It took me ten minutes and very little effort to do. It doesn't change the touchscreen experience. It just works. Enough said.

- It is extremely durable, I bought it in 2024, the protector only broke now in 2026 and my tablets actual screen is untouched. - It came with 2 protectors so I'm only just using the 2nd protector. - It is extremely easy to apply. It comes with an applicator and as you can see in my photo there are no trapped bubbles. - The screen is super clean and clear, I have never noticed any fingerprints, if there are, they're barely noticable lol. - It is fingerprint compatible, so I can open my lock screen with my fingerprint with 0 problems. I lwk forgot I had a protector on when I just dropped my tablet and I panicked for a sec, but this really saved me

Thankfully you get 2 screens. You get some wipes, a cloth and a sticker to lift dust off, plus a plastic frame to help put the screen on. My first go didn't go to plan and I was soon taking the screen off a few times as there were bubbles and dust which I couldn't get rid of. My OCD couldn't cope with what I could see while using the tablet. The screen got too dirty to use so I had to throw it. The 2nd screen went on perfectly and the screen protector is thick another to give you faith the actual screen will be protected. I'm happy with the product.

Got these as I had to get a replacement screen on the tablet and Sprigen one only has a single pane in it. These do just as good a job and the fixing frame let me get a near perfect fit on the first try. I recommend you start from the centre and use the supplied Spudgey to push the bubbles out. Overall though can't tell I have it on and with spares it means I'm able to replace it if I want to be even more of a perfectionist.

I dropped my headphones case on my Tab S9 and it cracked the display. The touchscreen stopped working and half the display wasn’t showing properly. But this screen protector was completely undamaged; no cracks or scratches at all! As sad as I was about the tablet, I was pretty impressed with the screen protector’s durability. The repair team removed the screen protector to fix the display. When I got it back, I immediately put on the second screen protector (I love that you get 2 in the box!) and I’ve had it on my tablet ever since. Installation was really smooth both times. You get a plastic guiding frame to make sure everything is aligned properly before you install the screen protector. I didn’t have any bubbles or dust or misalignment problems either time I put the screen protector on. The screen protector works great with the fingerprint sensor and the S-Pen. It doesn’t pick up too many fingerprints and feels really smooth to write on. It doesn’t affect viewing angles or screen clarity, either. It’s got a cut-out for the front-facing camera, so it doesn’t cause weird lens flare during video calls. Overall, I'm really pleased with this screen protector. The only thing I don’t like is that it is quite reflective. You can see reflections in pretty much every photo I posted. The reflections aren't too much of an issue in day-to-day usage when you're looking at the screen directly, and you can just angle the screen away from lights indoors. But it makes the tablet hard to use outdoors in the sun.

First time ever I have EVER put on a screen protector absolutely straight and with no bubbles under it! I have always cleaned the screen well immediately beforehand and did the same again now. The "Frame" is the most brilliant part - no more getting the protector slightly askew and trying to straighten it (thus letting in a bit of dust). My only wish (as with many screen protectors) is that the surface should be matt rather than reflectivee. I think JETech used to do plastic ones with matt surface - it would be nice to get them again, even if more expensive.

Great screen protector, very easy to install no air bubbles whatsoever

The screen protector fits well and looks clear, but the fingerprint scanner barely works after installation. I rescanned my fingerprints 3 times and still had trouble unlocking the tablet. Touch response is okay, but the fingerprint recognition became very unreliable. Pretty disappointing because everything else seemed fine.

It protects my screen and does a good job.

Ürün gayet kaliteli ve uygulaması gerçekten çok basit. Eğer düzgün takmanıza rağmen bazı noktalarda tozdan ötürü baloncuk oluştuysa ekran koruyucuyu hafif kaldırıp size verilen toz alma bandıyla oradaki tozu alın ve tekrardan uygulayın. Zaten halihazırda içinden uygulamanızı kolaylaştıracak bir çerçeve çıktığından ötürü pek zorlanacağınızı sanmıyorum. Tabletimi ekran koruyucusuz kullandığımdan şimdilik koruyuculu haliyle kalem kullanımına tam alışamadım. Ancak bunun dışında ürün gayet kullanışlı. Ayrıca son olarak içinden 2 tane ekran koruyucu çıkıyor. Eğer işi batırırsanız diğerini uygulayabilirsiniz.

Edit 3 mois plus tard : pas de fissure à l'horizon, verre trempé plus tolérant avec la légère flexion de la tablette, je rajoute la 5ème étoile, malgré l'absence du 2,5D, je me fais très bien aux tranches franches non arrondies. ----------------- Produit acheté et installé pour Galaxy Tab S8+ Les Plus : - Le packaging est propre, il comprend le nécessaire pour l'installation du verre trempé (2 exemplaires) - Le guide est très pratique ! Pas besoin de chercher l'alignement parfait (sur une surface aussi grande, je m'y suis repris à plusieurs fois avec d'autres verres sans guide). Il remplit parfaitement son office. - Installation du coup très rapide : 5min chrono (nettoyage, pose du guide, pose du verre) - Pas de bulle si vous avez bien fait les choses - Bonne glisse que ce soit au doigt ou au stylet - Lecteur d'empreinte parfaitement fonctionnel Les Moins : - Pas de bordures "2,5D" : les bordures sont franches, pas arrondies, ce qui change de mon ancien verre trempé, et ce qui est un peu moins agréable à la prise en main A voir la résistance dans le temps, la Tab S8+ a un défaut de conception selon moi qui fait que le verre trempé à tendance à se fissurer tout seul sans chute, à cause d'une certaine flexibilité au milieu de l'écran. Chose qui est arrivée avec mon ancien verre trempé au bout de quelques jours ... et que j'ai laissé 1 an ainsi, à voir avec cet autre kit ! J'actualiserai mon avis si jamais cela se produit. Globalement très satisfait, la résistance dans la durée à vérifier et l'absence du 2,5D me font enlever une étoile. Si le produit résiste bien à un usage courant alors je réviserai mon avis.

المنتج غير مطابق لصورة أي ليس من شركةjtech

Kalitesi çok iyi tavsiye ederim