3D Printer Enclosure with LED Light, Fireproof Dustproof Tent Constant Temperature Protective Cover for Ender3 Max Neo/Ender3 S1 Plus/Ender 5/ Pro/Plus/Neptune 4 Plus/CR-10/10S PRO10 Mini/CR-X, Large

The enclosure was very easy to set up, is very durable, there’s no smell when you’re printing, the heat stays in the enclosure. Fits a Creality CR10-Smart pro printer, full 1kg reel at the top of the gantry, and camera. The light that comes with the enclosure really adds to the light built into the printer. Great product.

This is a review for the large enclosure. Very easy to assemble. Be aware that this is quite large. The enclosure easily fits a Bambu P2S with AMS2 on top of the printer and has a lot of room to spare around the printer. You could easily fit at least two HT AMS units next to the printer. I ended up buying a medium size enclosure too for the P2S but I’m keeping this Large enclosure for future projects and/or a custom built printer.

This was my first printer i've ever bought, and we wanted to have an enclosure due to dust and animals. The enclosure is massive, but not massive enough to put a elegoo Neptune max in. It fits perfectly for my elegoo Neptune plus in though. So maybe if you have a printer underneath any max brand it will work perfectly. It does hide the noise and it does keep cold air out. At first it was a pain to build, but after a while you get it. I got it when I was on sale so I got 2 of them. I would definitely recommend this, especially if you're just starting out printing. The quality is pretty good.It just reminds me of a tent. And it has side pockets and slots, if you have AMS or combo.

Very good product, barely fit a Bambu Lab H2S with a AMS2 Pro sitting on top. Wanted extra protection as the printer is located in the garage. Great to keep dust out and more stable temp control. One item I would suggest is providing a hatch in the back so you can access the printer cords if needed, otherwise I have to take the shell completely off frame to gain access. Great product though!

I read several reviews prior to purchasing this item. Some stood out. One in particular was dinging it for being to big. It measures exactly what is in the description. Go figure. For the cost, I couldn't be more happy. My bambu lab a1 fits in the enclosure with room to spare. All of the allowances for power, fan and side access are done very well. The material is heavy duty and of good quality. Only test now is time. I'd recommend it, in fact, I'd buy it again.

This enclosure is a very good value for the price with only a few drawbacks. First of all, it was shipped very quickly and arrived well packed (more on this later). The enclosure is made of fairly robust black outer material with a sliver reflective, foil-like interior. The zipper is neon orange, which is a nice styling offset. I did not encounter any poorly made seams or mistakes in manufacture; everything was robustly sewn and seams were fairly well aligned, The instructions are pretty basic and confused me for a second until I realized that every set of rods (A,B and C) required them to be joined with the plastic couplers. The instructions seemed to suggest to me only the A set was to be joined, but it turned out that ALL sets needed to be joined to come to the right dimensions. This is undoubtedly a design factor to keep the packaging very small; which is great and not so great. The ultra small package and severe folding pressure required to place the enclosure in the box caused scuffing and cracking in the clear plastic window; some areas almost breaking through the plastic. While this is an annoyance, it is not a deal breaker. I just wish it could have been folded somehow to preserve the clarity of the main window. For the price, I will live with the scarring, which somewhat cleared-up when I wiped it down with alcohol. Be prepared to stuff, (I mean really stuff!) the frame into the enclosure, but do it carefully! It is a tight fit but is required to keep it from sagging on the frame. The LED light bar is OK; not a lot of light but just enough. All in all, would I buy it again? Yes, most certainly. It fits my Sovol SV06 Plus quite nicely with some spare room left over, which makes for nice access to the printer. The main access flap is on the left; wish it was on the right where my touch screen is located, but you can position the front window zippers in a fashion that makes it easy to get in and not lose a lot of heat. All in all, it's a great enclosure for those on a budget!

If you need instructions, they are simple and concise (1 page with pictures). There is also a link on the instruction page to a video that will help if seeing it done is your learning style. The product is well made with a look and feel of a well thought out product. My Elegoo Neptune 4 Plus fits perfectly. I could instantly tell there was a reduction in sound and heat in the room on my first print. The opening unzips the front and top of the enclosure, making access to the printer very easy. I was going to make an enclosure until I found this one. I just got to skip the trial and error of making something for the first time as they sometimes seem to be a prototype instead of a finished product. This saved me time, looks great and functions just as described. Great Deal = when price + quality are balanced. This is a Great Deal.

Honestly, improved the overall printing performance. The heat stays in just like a fully enclosed printer out of the box. Don’t have issues now with sticking to the bed. It is a bit bigger in width than for my CR10spv2 but height was perfect for it. If you return this like it warns people it’s because of not measuring before hand.

Groot genoeg voor min elegoo neptune 4 plus. Kabel van het heatbed komt wel tegen de achterkant, maar dat is eigenlijk alleen tijdens het kalibreren en de stof van de behuizing is zo flexibel dat er nauwelijks stress op de kabel komt. Apart van een constante (hogere) temperatuur is tevens de luchtvochtigheid lager, wat wel handig is bij het gebruik van hygroscopisch filament. Enige nadeel is dat de aluminium bekleding het wifi signaal verstoort, dus is het waarschijnlijk handig om meteen een verlengkabel te kopen om de antenne buiten de behuizing te plaatsen.

Ich habe einen Geeetech A30 pro, und der passt nicht so einfach mehr in die üblichen Ikea-Schränke hinein. Da aber besonders große Drucke zugluftempfindlich sind habe ich nach einem Gehäuse gesucht, um ihn darin unterzubringen. Das Yoopai-Zelt funktioniert hier prima. Das Grundgerüst ist schnell zusammengebaut und sitzt sicher, der Stoff spannt sich straff darüber und hält die Wärme prima im Inneren. Praktisch ist die Tasche an der Seite, hier ist immer das Werkzeug für schnelle Einstellarbeiten oder das Reinigen der Nozzle untergebracht. Das Sichtfenster ist groß genug, die mitgelieferte LED-Beleuchtung ausreichend um z.B. mit einer Cam den Druck überwachen zu können. Der Wärmeerhalt führ zu merklich geringerem Stromverbrauch, da der Drucker weniger nachheizen muss. Zudem werden die Drucke gleichmäßiger und stabiler. Klare Kaufempfehlung!

Fantastic enclosure at this price point. Receive this about a day ago and my initial impression has been very good so far. The stitching is high quality, the size is more than adequate for most users, the addition of pleasantly bright light is an added bonus. The reflective interior insulation seems durable and of good quality, the exterior is a heavy material suitable for fire resistance and is quite durable as well. The cover fits snugly with the frame ensuring the enclosure has no drooping on any sides or the roof. Overall, I'm quite impressed with this enclosure and would recommend this to others in search of a affordable but quality enclosure.

Utilizzo questa custodia YOOPAI con la mia Elegoo Neptune 4 Plus e ne sono pienamente soddisfatto. Cercavo una soluzione che proteggesse la stampante dalla polvere e che mi permettesse di mantenere l'ambiente di stampa a una temperatura costante, e questa enclosure svolge il compito egregiamente. Qualità e Assemblaggio: La qualità costruttiva è ottima e l'assemblaggio è stato estremamente semplice e intuitivo. Una volta montata, la struttura è solida e spaziosa, ideale per le dimensioni della serie Plus di Elegoo. Gestione Termica: Utilizzo questa custodia in combinazione con un riscaldatore Chitu Systems. Insieme creano la camera calda perfetta per la stampa di materiali tecnici (come l'ABS), evitando problemi di warping o distacchi. Sicurezza e Aerazione: Molto utili i fori predisposti per il sistema di aerazione. Li sfrutto per convogliare i fumi all'esterno quando stampo materiali che rilasciano vapori pericolosi, rendendo l'ambiente di lavoro molto più sicuro. Comfort: La luce integrata è una chicca comodissima per monitorare l'andamento del primo layer o per controllare le stampe notturne. Rumore: Per quanto riguarda l'isolamento acustico, riduce leggermente il rumore dei motori e delle ventole, ma la differenza è minima; non aspettatevi che renda la stampante silenziosa, il suo vero punto di forza è la gestione termica. In conclusione, è un accessorio indispensabile se volete stampare qualcosa di più complesso del semplice PLA o se tenete la stampante in ambienti non isolati. Verdetto: CONSIGLIATO. Robusta, facile da montare e perfetta per chi ha bisogno di un ambiente di stampa controllato e sicuro.

Sterke stof, beetje prutsen om in elkaar te zetten. Gebruik: geen invloed van tocht meer. Aangename temperatuur binnen en dus betere prints. Moest ik eerder gedaan hebben