IFCASE Dust Proof Air Filter Stand for Mac Studio & Mac Mini M1 M2 (Black)

When you spend as much money on a Mac Studio as I did in the many thousands of dollars you want to protect it from dust. Dust is just bad for electronics, no two ways about it. This fits perfectly underneath the Mac Studio and lifts it up about an inch and a half off the table and keeps the bottom of the computer from getting scratched up by moving it across the table surface to dust. Really nice. It has a washable, reusable mesh filter which is a plus. I added a nylon top cover to completely encapsulate the Mac Studio from dust on top as well, also something I bought from Amazon. When all assembled the Mac Studio completely vanishes and dust is only a problem on the covers a filters which can be easily cleaned. Don’t spend $5,000 on a high end computer and cheap out on its maintenance. This air filter is affordable and highly functional and recommended as a result. Many of the other reviewers commented about the tiny gap between the Mac and the stand regarding it allowing air in more as the filter fills up, or when plugging into the USB ports that the Mac slips off the stand, or that the stand has no rubber feet on the bottom of the stand to keep it from slipping on a smooth desk. Yes noticed all these things too. I have a solution for all that and it’s what I did. I bought the black model for a reason. I put small strips of black electrical tape on each of the 4 corners and I wrapped entirely around the Mac and the stand a stip of electrical tape split 1/2 on each on the tape with to seal the gap. Thus also stopped the Mac from sliding on the stand when plugging into the ports and stopped the sliding on the desk. Black tape. Black stand. Black Apple logo on top. You don’t notice the tape and it looks fine on the Mac. Good even. Now, air flow is entirely through the filer and no slippage.

I’m very happy with this product. After some hours with it in place there’s no detectable rise in temperature from any of the Mac’s many sensors, and - most telling of all - no change in the two fans’ RPM readings (remaining between 1326 and 1335 with my machine). I do not expect the Studio to run cooler with this product but I was prepared to accept a slight rise in temperature or fan speed because of the extra dust filter. It’s a pleasant surprise that - new at any rate - there’s no detectable difference. One point I was unsure about was whether the filters are washable. There’s no information in the product description about this. However, the product box includes the information “just … rinse under water to clean the dustproof net” - that’s in addition to (eventually I guess) replacing the net (filter) with one of the two included spares. It would be worth the seller including this information for potential buyers browsing its Amazon page! The size of the filter looks pretty much to match standard 140mm fan filters. I happen to have some (“Ultrafine PVC Mesh 17 pores per inch”) on hand and it looks like they will fit with only very slight modification or none at all. I bought the clear version of this, not trusting that the aluminium finish would be a perfect match given the materials are difference. Some slight scuffing is visible on three sides but isn’t visible when in place under the Studio. Overall, I find this product is simple, no frills and effective.

Works well with my Mac Studio. I don’t anticipate ever having to open up my Mac Studio, but seems like a good investment given the amount of dust I found in my windows pc’s that i have opened in the past.

Between pet hair and dust (I sometimes have to set up a workstation out in the desert, etc.), having a filter on my Mac Studio is basically a non-negotiable, especially given how difficult Apple made it to strip the thing down and clean it out. This filter stand is an OK starting point since the biggest thing I'm going to be dealing with for a while is pet hair, but I'm going to have to do something better for the fine desert dust. I haven't seen anything available that looks like it's much better though, so I'll probably just make my own as an upgrade. The filtering situation is a bit of a catch-22 since, without going to an active system with its own fan(s), a stronger filter would impede airflow too much. I think the filtering in this stand is probably about as good as one could expect without going so aggressive with it that the filter itself would be a problem. As it is, I suspect that there's an increase in operating temp for some demanding tasks, but it's probably in the same ballpark as the heat increases from the computer getting too much hair and dust inside, so I think it's worth it to have the filter. But, I do have some criticisms of the stand itself that could and, arguably, should have been done better. The stand doesn't have much for grip on the feet for sitting on something like a smooth desk. And, likewise, the computer slides around on the stand too easily. So, when plugging in USB cables or whatever, I have to hold the whole thing to keep it from sliding. Minor issue, especially since I mostly use a dock for that stuff, but still a thing. I'll probably throw some shelf liner under the stand and maybe tape the computer to the stand to keep it from sliding. A bit goofy to need to do stuff like that, but at least the stand is fairly cheap. For the money, I think the appearance of the stand is fine. Not going to turn any heads, but that's not what I have it for anyway. Build quality also isn't anything super impressive, but, again, for the money it's what I expected and, in terms of actual use, apart from the lack of grip, it's fine.

First, yep, it's just plastic, but it does the job of keeping the dust off and lifting the Studio up, which makes plugging in paraphernalia a bit easier. If you touch it, you can tell instantly it's not Mac quality, but the "eye test," just looking at it, the match is pretty solid. I've had it for about a year now, I've traveled with my Mac Studio a few times—it will fit in the original Mac Studio box when I pack it up, which is nice. In the end, it's probably overpriced and making money off the Apple name, but I've been happy with the purchase and tend to think it was worth the investment. Thumbs up from me.

Kind of cheesy not 100% sure the filter is fine enough to catch all the dust

excellent

I was honestly a bit hesitant to purchase this IFCASE Desktop Dust and Air Filter Stand at first, but I took a leap of faith and I could not be happier with the results. After reading some forums on Reddit and YouTube reviews I decided to give the product a try. If you own a Mac Studio, you know that once those fans really get going, the machine loves to collect dust right on the fan holes. This stand completely solves that problem. The built-in filter does an amazing job of stopping the dust bunnies and keeping dirt out of my fans, which gives me great peace of mind for the longevity of my computer. Setup is super easy as you just place your Studio on top and your good to go. A quick warning for potential buyers: This does not fit the new M4 Mac Mini. It is definitely designed specifically for the footprint of the Mac Studio. I do feel though that it could be created with a little imagination and a 3-D printer. Value is good for what you are getting, and it keeps the airflow moving. The only minor downside to keep in mind is the height. Depending on your monitor setup, this stand will add another inch or so to the total height of your Studio. Once I placed my computer on it, it no longer fit underneath my Studio Display, so I did have to rearrange my desk setup a bit to make it work. Overall, even with having to reorganize my desk, I am very happy with this purchase. It does exactly what it promises by keeping the dirt and dust out of the fans!

This article was scratched on all sides. But since it will sit under my Mac Mini, I won’t see it much. Wish it came with a protective film to avoid such disappointment. I love the additional filters (2). I love the way it’s placed and secured in the stand. Wish it had rubber feet at the bottom to avoid it slipping cause I wanted to mount it on a laptop cooler fan to dissipate as much heat as possible. At least now my Mini is dust protected.

Me gusto mucho quedo excelente, es de plástico se ve que soportará mucho tiempo, llegó con 3 filtros lo cual se agradece y son como de esponja pienso que cuando se ensucie podrá lavarse con cuidado y usarse más tiempo, el precio es la mitad de otros artículos similares, el color gris casi da el tono de la mac, si se los recomiendo.

Good product .Price of the product bit disappointed.

très bon produit, bien fini, mais 4 étoiles car impossible de trouver la référence des filtres (que 3 dans la boite)

Doesn't match the Mini's colour exactly (you know, Apple's "custom" alloys...) but performs its function just right: getting more and cleaner air into your Mini (or Studio) Mac. Feels a bit flimsy but no problem holding the weight.