2 Pack Anti-Glare Screen Protector for 7 inch Kobo Libra Colour 2024 | Scratches Resistance, Matte Clear Slim Film, Bubble-Free, Kobo Libra Accessories, for 7" Kobo Libra 2 2021 E-Reader

I followed the instructions in the listing video, and it was easy to follow and repeat. It was also very forgiving as I messed up the alignment a bit initially, but I was able to peel it off and get it right without ruining the screen protector, so happily enough, I have an extra now just in case I need it. The bubbles were easy to get out with the tool provided and without damaging the screen. You can just barely see there is a screen protector in the bottom corners, but it doesn't impact the screen otherwise, and the touch screen is just as sensitive with it on. Overall, super worth it for 10 bucks and would recommend.

Is really easy to install on the kobo, I was nervous about messing it up, but it even comes with a piece of sturdy cardboard wrapped in a soft cloth so you can press out the air bubbles out. Also is pretty durable not a single scratch and haven’t had to change it since I bought it.

Ok so yes. These can be tricky to install. SOMEHOW I managed to get my first one nearly perfect so here are my tips: Use the video demonstration for the MoKo Kindle 7” Paperwhite protectors. I reached out and the seller sent me the link to that listing. It gives a much better visual of what you’re supposed to be doing with the guide stickers and backing and all that. 2nd, and maybe most importantly, leave the manufacturer’s plastic on till the last second. That way you won’t have to deal with much grime and dust to begin with. My mistake was skipping the cleaning sticker altogether. If I had used it briefly on the edges of my screen I woulda been golden. But keeping the plastic on till I was ready to wipe and peel helped me get things *almost* bubble free. I also had a dust collector running in the room (one of those nail ones). Dunno if that helped or not but I was anxious. 😆 I dusted my work surface and put my hair up for good measure 😅 In the end I wound up with one speck of dust and a tiny hair entrapped under the protector 😭 They are on the edges where the factory film had started peeling up. I didn’t install the film perfectly straight but it still looks good. Overall I’m pleased and I have extra sheets for the future if needed. I like the matte feeling when I use my pen too, btw. It adds some resistance. I’m not bothered by text clarity or whatever. Hardly noticeable to me (but I’m new to ereaders).

It took me FIVE of these protectors (so three orders) to finally get one adhered correctly. Beware - a single two-pack of these is likely to be a training ground for how to install them, not actually usable. - Protector #1: tons of dust specks between the screen and protector. Tons of bubbles that wouldn't squeeze out. Unusable, removed. - Protector #2: Misaligned, overlapped plastic bezels of screen, had to be removed. At this point I tried a tempered glass protector instead, which adhered just fine, but messes up the touchscreen behavior (making it often not respond to touch at all), so had to be removed. - Protector #3: Bubbles that wouldn't squeeze out, trying to remove and re-apply was hopeless (wouldn't re-adhere) - Protector #4: Again misaligned, ended up so angled that it left a huge flap in the corner of the screen. Had to use that flap to pull the whole protector off and trash YET ANOTHER of these. I was super frustrated at this point, but decided to try one last package before giving up. First, dry-fit the protector with both sides' protective plastic film still applied. Use the guide stickers, adhered to the #2 side protective film as a hinge (on the bottom left side) and a lever (on the top right side). Once dry-fit, lift using the lever side to flip the protector over, clean the reader screen (dust specks, oils, etc), now remove the #1 side protective film and use the lever sticker to flip it back over. While the protector lands onto the screen, use the provided squeegee tool to adhere it flat. Note that the guide stickers will hold the corners off the screen, this is fine; it's actually ideal because you can squeegee any air bubbles in the middle that appear, towards those edges, allowing them to escape before final adhesion. Now with the entire protector installed and adhered minus the guide sticker corners, use the guide sticker in the bottom left (your hinge) to remove the #2 (top) side protective film (it will lift right up when you pull the guide sticker off, the adhesive on those guide stickers is unreasonably strong). Peel up and to the right, and eventually you'll be removing your lever sticker from the top right. Squeegee your corners flat. Enjoy, your screen protector should now be installed, flush, and fully contained inside the bezels of the screen. Does not interfere with touchscreen usage, and only barely, if at all really, impacts the already-muted hues of the Kaleido 3 panel on the Libra Colour. Feels good to the touch. Should protect the screen well. I hope with all my might I never have to replace this with Protector #6 (still in the box), because the application process is comically insane for mere mortals to achieve. Applying PET protectors is nothing like applying tempered glass, but alas, if you want the touchscreen on this device to work and a good feeling surface for the pen to write against, PET is what you're stuck with.

Low quality, impossible to install without dust or bubbles. I'm super frustrated because I just wasted $10 on literal garbage there was already dust on the sticky side of the screen protector on both of the ones I received before I even installed it. I'm actually pretty good at installing screen protectors and do it regularly because I get a screen protector for literally every device I own and these are the worst ones I have ever received... the included accessories for applying are also unbelievably awful and actively flake off dust onto the product as you're trying to apply it. I made the mistake of my first attempt using the included material and after that was a bust I use my own stuff and it didn't matter cause there was still dust already on it before I pulled off the protective film. Don't waste your money.

This is a great screen protector. It went on without any bubbles and fits very well.. maybe even a little too well. It looks like it might be difficult to take off if I need to remove it. I honestly can’t even tell that there is a screen protector on. The screen cleaning and dust applicators were also very helpful. I really have no issue with the quality or fit of this though. I’m not sure if you’ll be able to tell from the photos but my only complaint is that with it being a matte screen protector I do notice that the screen quality has decreased a bit. The matte protector makes the font look a bit less sharp and adds a “fuzzy” look to the screen. This definitely isn’t the fault of the brand, it’s just the cost of having a matte screen cover. If that is going to bother you, then I’d say definitely stay away from this and get one that isn’t matte.

Average screen protector, does NOT fit the kobo Libra colour 7” exactly. Bunch of air bubbles when applying but can be squeegeed out. Works well.

Fit well and easy to apply. Able to use a stylus without issue and glad to not see any scratching in the screen. Affordable. Have been using for months with no problems.

Muy buena calidad, fácil de colocar, lo compraría de nuevo

Lätt att applicera, matt på riktigt, trevlig känsla med att använda stylus på den filmen. Det är bara viktig att placera den rätt från början vid översta kanten av skärmen, annars det ska sitta lite snett så jag behövde klippa ca 1 mm från vänster nedersta sida.

The product arrived folded and damaged in the middle. The outer box was fine, but the product itself was defective. That’s why both of them have air bubbles. I used it temporarily, but I will replace it soon. It was a bad experience.

A little harder to apply but they don’t make the screen lose that much quality so that’s a plus

Genial. Por los comentarios, creí que sería difícil de colocar. No he tenido problema ninguno. No hay reflejos raros, la pantalla del Kobo se sigue viendo mate y ahora puedo usar el lápiz sin miedo a estropear la pantalla. El tacto es muy gustoso, no es liso. Lo he puesto sin problema, como si fuera el cristal templado del teléfono: un poco de cuidado y paciencia y ajuste perfecto. No retrasa en absoluto la respuesta táctil de la pantalla. Muy soprendida por la buena calidad.