2 Pack Anti-Glare Screen Protector for 7 inch Kobo Libra Colour 2024 | Scratches Resistance, Matte Clear Slim Film, Bubble-Free, Kobo Libra Accessories, for 7" Kobo Libra 2 2021 E-Reader

There's a tiny gap at the top of mine that I was initially worried about but I don't even notice it. I can't even tell I have a screen protector on my Kobo and it doesn't seem to affect my stylus sensitivity at all. There were some minor bubbles I was worried about when I installed it too but they all went away. Great screen protector!

Ok so yes. These can be tricky to install. SOMEHOW I managed to get my first one nearly perfect so here are my tips: Use the video demonstration for the MoKo Kindle 7” Paperwhite protectors. I reached out and the seller sent me the link to that listing. It gives a much better visual of what you’re supposed to be doing with the guide stickers and backing and all that. 2nd, and maybe most importantly, leave the manufacturer’s plastic on till the last second. That way you won’t have to deal with much grime and dust to begin with. My mistake was skipping the cleaning sticker altogether. If I had used it briefly on the edges of my screen I woulda been golden. But keeping the plastic on till I was ready to wipe and peel helped me get things *almost* bubble free. I also had a dust collector running in the room (one of those nail ones). Dunno if that helped or not but I was anxious. 😆 I dusted my work surface and put my hair up for good measure 😅 In the end I wound up with one speck of dust and a tiny hair entrapped under the protector 😭 They are on the edges where the factory film had started peeling up. I didn’t install the film perfectly straight but it still looks good. Overall I’m pleased and I have extra sheets for the future if needed. I like the matte feeling when I use my pen too, btw. It adds some resistance. I’m not bothered by text clarity or whatever. Hardly noticeable to me (but I’m new to ereaders).

I followed the instructions in the listing video, and it was easy to follow and repeat. It was also very forgiving as I messed up the alignment a bit initially, but I was able to peel it off and get it right without ruining the screen protector, so happily enough, I have an extra now just in case I need it. The bubbles were easy to get out with the tool provided and without damaging the screen. You can just barely see there is a screen protector in the bottom corners, but it doesn't impact the screen otherwise, and the touch screen is just as sensitive with it on. Overall, super worth it for 10 bucks and would recommend.

Original review follows this updated one, below the asterisks. This rating has been increased from 3 to 4 stars. I would give 5 stars if the updated instructions were included in the packaging in the future After writing my original review, customer service reached out to me and offered me a full refund, or a replacement. They also included a set of instructions that make use of the included guide stickers (which would've been good if I hadn't already ruined both protectors 😅). However, after reading the new instructions, I decided I'd give it a try because it seemed possible to get a better installation, and so I opted for a replacement. I received my replacement very quickly and installation was a success! Customer service was very communicative through the whole process, and they really seemed to care that I had a good experience. This screen protector is beautifully matte, feels great when writing with the stylus, and doesn't add any glare in sun or indirect lighting situations. I feel confident that my screen will be protected from accidental scratches from my stylus, or careless cat claws, or an accident in my bag if something gets inside the sleep cover against the screen. I do use the screen protector in conjunction with a sleep cover, because with e readers, it is very important that you prevent impact to the screen, or force applied, especially to a small area, to keep the glass substrate from cracking. The screen protector is wonderful, but it really hinges on proper installation. I offered feedback that they should include the other directions in the package and on the box in future production runs, and everyone who buys one of these in the meantime should get a copy of the other instructions emailed to them. This won't solve everything, unfortunately, because some people just aren't going to see new and improved instructions unless, and until they are included in the packaging, but hopefully it could reduce some frustration. Do not use the instructions printed on the box, and do not use the instructions on the paper inside if they do not include the use of guide stickers. The guide stickers are essential to getting the protector to line up properly, and their use also prevents little bits of dust from getting staticked onto the screen, which is what happens if you use the installation method of gradually pulling the backing off from underneath the protector. ********************* I've purchased 2 packs of these so far, and I've only managed to install 1 out of 4 screen protectors successfully (well, only one dust speck under the screen and one lifting corner). I consider myself to be pretty good at installing screen protectors! I do them for myself, my husband, my friends, but I could not get these. The screen protector itself is lovely, it feels satin smooth, is low glare, and feels pleasant to use my stylus on. I successfully installed one on my Kobo Libra 2 which I lent to my sister, but I cannot get a satisfactory install on my Kobo Libra Colour. It's infuriating. Every single time, I get little dust or dirt particles stuck to the protector, and am not able to remove them from the adhesive once they're there. I've tried this in 3 different locations between my home and work hoping that one of them would have less dust! It's also difficult to line the protector up to install. I have tried peeling part of the short edge film, then pressing it down while gradually peeling the rest, I've also tried the long edge. I find it's hard to get it to line up on the screen. I think I'm doing well, but I get to the other side and the protector is crunching against the frame and not staying stuck down, just off by a fraction of a milimeter. I tried to use the puzzling 'guide stickers' (which were included but not explained anywhere) as sort of handles to maneuver the screen protector into the proper position, but they got stuck on the frame. And then when I get a screen protector stuck on in a straight manner, but see all the dust underneath, I want to cry. Then it's almost impossible to get under the edge of the protector to pry it off, which would be a great feature, if I could get it on there right in the first place! I really want to try again, but I can't afford to keep throwing away $5 on each protector when I fail! $20 already feels like a lot for one successful install, should I risk another $10 on 2 more tries?

Low quality, impossible to install without dust or bubbles. I'm super frustrated because I just wasted $10 on literal garbage there was already dust on the sticky side of the screen protector on both of the ones I received before I even installed it. I'm actually pretty good at installing screen protectors and do it regularly because I get a screen protector for literally every device I own and these are the worst ones I have ever received... the included accessories for applying are also unbelievably awful and actively flake off dust onto the product as you're trying to apply it. I made the mistake of my first attempt using the included material and after that was a bust I use my own stuff and it didn't matter cause there was still dust already on it before I pulled off the protective film. Don't waste your money.

Fit well and easy to apply. Able to use a stylus without issue and glad to not see any scratching in the screen. Affordable. Have been using for months with no problems.

Average screen protector, does NOT fit the kobo Libra colour 7” exactly. Bunch of air bubbles when applying but can be squeegeed out. Works well.

I wasted my first screen protector by peeling off the underside film entirely. I ended up with microscopic specks causing about 10 permanent air bubbles. Peel back the top edge of the underside film. Align along the top of the screen and press gently along the middle of the screen protector as you peel back the film. This will leave you with zero bubbles and no specks. I have noticed that screen sensitivity, clarity, and low-glare are similar to the naked screen. I saw this fit the new Kobo Libra Colour and it does. It’s a bit snug for removal, but I like that the screen is very protected. Though I was careful, I got scratches on my first device (no screen protector) as the screen seems extra fragile. I definitely recommend getting this screen protector. I’m happy with this product and would recommend.

Muy buena calidad, fácil de colocar, lo compraría de nuevo

Lätt att applicera, matt på riktigt, trevlig känsla med att använda stylus på den filmen. Det är bara viktig att placera den rätt från början vid översta kanten av skärmen, annars det ska sitta lite snett så jag behövde klippa ca 1 mm från vänster nedersta sida.

The product arrived folded and damaged in the middle. The outer box was fine, but the product itself was defective. That’s why both of them have air bubbles. I used it temporarily, but I will replace it soon. It was a bad experience.

A little harder to apply but they don’t make the screen lose that much quality so that’s a plus

Genial. Por los comentarios, creí que sería difícil de colocar. No he tenido problema ninguno. No hay reflejos raros, la pantalla del Kobo se sigue viendo mate y ahora puedo usar el lápiz sin miedo a estropear la pantalla. El tacto es muy gustoso, no es liso. Lo he puesto sin problema, como si fuera el cristal templado del teléfono: un poco de cuidado y paciencia y ajuste perfecto. No retrasa en absoluto la respuesta táctil de la pantalla. Muy soprendida por la buena calidad.