Tech Armor Screen Protector for iPhone 8 Plus, 7 Plus, Ballistic, 1-Pack

UPDATE: It's been almost a year since I've written this review and seeing that some people are still reading this and commenting on my review, I think I owe it to Tech Armor to write an update: Shortly after I wrote this review I received a replacement in the mail. Don't know wether this review led to the quick turnaround or not, but I can say I did not experience any issues with the 3rd replacement. This leads me to believe that the previous two must have been defective - my best guess is that the adhesive they use may not have been applied properly. However, I was so impressed with the quality of the last replacement that I bought another one for my wife's iPhone 6. Over the year these screen protectors have saved our screens from cracking on multiple occasions (especially my wife's). To see a cracked screen following a fall only to realize after it's just the screen protector doing it's job, is a great feeling! Also need to add that TA has really simplified the process for getting a replacement. I know the process well due to the number of times my wife has cracked her screen :-) TA stands by their lifetime guarantee and now all that is required is filling out a web form on their site and a replacement is in the mail in no time. Great job Tech Armor! This product works as advertised and I would recommend it to ANYONE. This screen protector is terrible, Tech Armor support is even worse. Ordered this item in early Dec and noticed the corners of the cover would not stick to the screen (Yes, installed on flat part of screen and followed all instructions as per their YouTube video). Contacted TA for a replacement which took 4 weeks to receive! Same issue with the replacement. Contacted TA again for replacement and advice on how to prevent this from happening again and just got a reply from them that this screen protector is now out of stock until early Feb. 2 months to get a screen protector that actually does what it's supposed to....stick to the screen. Completely unacceptable. I usually refrain from leaving negative comments but Tech Armor, you've left me no choice. Below is the latest email I sent them on 1/14 and their response 3 days later, on 1/17. "I recently received my replacement for my Ballistic Glass Screen Protector for iPhone 6 Plus (which took almost 4 weeks to receive! BTW, multiple emails for a status updates went unanswered) and I’m experiencing the same issue I reported with the first one. The corners of the cover are not completely sticking to the screen. I followed all instructions, including wiping down the screen first and drying it with the microfiber. Removed all dust with the provided stickers, and made sure to align the cover with the flat part of the screen. However, the corners do not stick and in fact this replacement looks worse than the first one (see image attached). When I first emailed on this issue the CS rep who reached out offered to send a replacement right away without offering any advice or suggestions on how to prevent this from happening again. Now here we are again! In reviewing some of the customer images on the product page in Amazon, it appears others have experienced the same, though not everyone. This leads me to believe that some of the covers may be flawed. My friend is using the Zagg invisibleshield glass screen protector on a 6 plus and it looks flawless. This is exactly what I expect from the Tech armor ballistic glass cover. I’m impressed with the glass quality, clarity and ease of installation of this screen cover, however the bubbling on the corners ruin the whole experience. I’ve refrained from leaving negative feedback on Amazon but I’d like to get this issue resolved once and for all. I also hope I won't have to wait another few weeks for a replacement. Will you please send me a replacement and any instructions/suggestions on how to prevent this issue from happening again? Please advise. Thanks, XXXX Valdez Order # XXX-XXXXX-XXXXXX" and Tech Armor's response... "We sincerely apologize for the difficulty. The iPhone 6 plus is temporarily out of stock and will be back in stock on early February at which time we can ship your replacement. Once your order gets shipped from our side we will send you the tracking information. Best Regards, Maha Tech Armor Support Team"

I didn't know installing a screen protector could be easy until I bought this product. I've installed plastic film screen protectors in the past, and after 30 minutes of trying to clean, perfectly line up and remove air bubbles, there were always air bubbles at the end and It was always a stressful process. This tempered glass screen protector is better in every way than the plastic ones I've used in the past and only took 5 MINUTES AND NO BUBBLES!!! When you open up the package you will find the screen protector and tools to help you install it. The tools include: a special wipe to clean screens (not pictured), a nice microfiber cloth, stickers that remove dust, and a plastic card for pushing air bubbles out (doubt you will need it). The first thing I did was take my phone out of its case. I then cleaned off the screen with some isopropyl alcohol and a paper towel (although it's probably ok to just use the included wipes, I figured it couldn't hurt to make sure a majority of any dirt was removed first). I then used the wipes to clean the screen again. DONT OPEN THE WIPES UNTIL YOU ARE READY TO USE THEM. Once opened the wipes will dry out within a minute or two. I then went over the screen with the microfiber cloth. I looked at the phone at an angle with a bright light on (and the screen off) to make sure there were no smears left or dust. I found a dust particle or two and used the dust tape/sticker to remove it. Final step apply the screen cover (can you believe we're almost done already?) Remove the film from screen protector and make sure not to touch this side. Ready for the hard part? Carefully align the screen protector while holding it above the screen. When you think it's lined up well, slowly, and I mean slowly, lower the screen protector onto the screen. MAKE SURE YOU DONT APPLY ANY PRESSURE! Try to lower it at an angle so that one side is not touching the screen so you can adjust it. Once it's set down completely it's gonna be difficult to move. And once you push the air out, don't even bother trying to adjust. Once it's finally adjusted and set down, take the plastic card and drag it from the side that first touched the screen to the side that touched last to get the air out. If you cleaned it properly then the screen protector should turn black as the air is being pushed out. If there is some dust or something after applying, put some force on the plastic card and try to push it towards the edge. My wife saw the results and wanted the same screen protector. When hers arrived I noticed they slightly updated the design to encompass the phone speaker (the one you out your ear to when you make a call). It's good to know they are continually improving and updating the design. When I was installing the screen protector on my wife's iPhone I didn't lower the protector at an angle (meaning all of the screen protector came into contact with the screen at the same time). It was a little crooked and I tried adjusting it. As I tried straightening it I accidentally applied pressure on the top and I watched the protector gradually turn black as the air was pushed out automatically by the weight of the glass. At this point it was straight and off center by 1mm and i couldn't easily pry it off with just the plastic card that it came with. Since it was barely noticeable my wife didn't mind. I was just surprised that after installing it by accident it didn't have a single bubble. That by itself is worth $10. The protector is a little thicker than the plastic ones and you will feel a bit of bevel when you use Touch ID but it doesn't bother me. The iPhone screen is curved at the edges so the screen protector doesn't cover all of the glass, but it still covers the entire screen area. Which is actually a good thing, because with the extra thickness it would probably interfere with some tight cases if it covered the whole glass. Neither mine or my wife's case touch the protector. With all the installation/cleaning tools it comes with, the saved of frustration of removing air bubbles, the saved 25 minutes, and of course the protection of tempered glass, this thing is well worth $10. I would definitely buy again. Thanks for a great product tech armor.

I've always been a fan of PET plastic film protectors because they allow you to apply them to the phone and then lift them up as many times as needed to remove dust underneath. They can then easily be reapplied to the screen of your device. The problem with PET plastic protectors is that they always end up looking scratched up and dirty after a short while, they just seem to attract fingerprints and finger oils. So I was eager to make the jump to a glass protector but hesitated because I had always heard that the installation was a one shot deal. If you got something stuck under the glass, you had to live with it. Well for my iPhone 6 Plus I decided to overcome these reservations and upgrade finally to a tempered glass protector. There were so many to choose from on Amazon my head was spinning. Fortunately my friend ordered the Tech Armor Ballistic glass screen protector for his iPhone 6 just a few days prior to my search for a glass screen protector. He received a unit with a precise ear speaker cutout and a horseshoe shaped home button cutout. Most of the other protectors on Amazon showed a large rectangular cutout by the ear speaker and I did NOT want that. Inspired by his purchase I ordered the same Tech Armor Ballistic glass screen protector for my iPhone 6 Plus. It arrived super fast as does everything I order from Amazon. It came in a nice padded envelope and was in perfect shape when I opened it up. The first thing I did was to lay the protector down on top of my iPhone 6 Plus screen to see how everything lined up. The ear speaker cutout was very precise and the cutout around the home button lined up perfectly as well. I used the hinge method to install the protector and this turned out to be an excellent choice. If you are not familiar with it basically you place the protector exactly on top of your screen until you have it perfectly positioned. Then you use a few pieces of tape on one side of the phone to attach the protector to the phone so that you can then flip it over to the side like the page of a book. When you are ready for final installation the protector can then be flipped back onto the screen and it should still be perfectly aligned. If you aren't sure exactly what I mean Google "hinge technique screen protector" and you will get more than you would ever care to read about the subject. Suffice it to say that it works. I steamed up my bathroom a bit with the shower to remove any dust particles floating in the air and proceeded with the install. I took off my old plastic protector and my screen was very clean underneath. Still I used the cleaning wipe provided by Tech Armor with the screen protector to go over my screen one time to ensure that it was clean. Once I was satisfied that no dust or other particles were on the screen I removed the protective backing on the rear of the screen protector. I quickly flipped the protector down on to the screen and it literally installed itself. You could literally see the glass as it was adhering to the screen of my phone. I then removed the 3 pieces of tape i was using for the hinge technique and took a look at the screen to see how I did, very well indeed. I found one small piece of dust and debated whether or not I should try to remove it. I decided to go for it. I used my fingernail to pry up the corner closest to the dust, then I used one of the dust removal stickers provided by Tech Armor in the package to grab the piece of dust. Then I let the protector fall back down on to the screen of the phone. Once again it literally installed itself and the dust was gone! That was a huge surprise as I always thought it would be impossible to lift a glass protector, remove dust, and place it back down. I don't think Tech Armor recommends this but it worked for me and I was quite surprised and pleased about that. The protector itself is super clear, I mean literally like nothing is on the screen at all. In the past 24 hours I have been using it I have found that it virtually leaves no fingerprints, I don't even understand how that's possible but it must have some sort of oleophobic coating that seems to really work. Compared to the plastic protectors I was so used to it was a revelation. The feel of the surface is also quite different than a plastic protector and in a very good way. It's hard to put in words but it's just a much higher quality, satisfying experience to use. Overall the protector is outstanding and I am very pleased with it. If I had to voice one criticism it would be about the width of the protector. It just barely covers all of the width of the viewable screen area. I understand the issue with both the iPhone 6 and 6 Plus screens having curved edges and requiring this, however if it were just a millimeter wider overall it would go a hair beyond the viewable area which I would have preferred. This is really more an issue with the iPhone curved screen edges than it is with the Tech Armor protector because all protectors seem to have to make this compromise. In conclusion this is a 10/10 product if you understand the compromises that the iPhone 6 and 6 Plus introduce. I highly recommend it and will be using Tech Armor products in the future.

I am very pleased with the product. I had a slight issue with the screen I received. The top part where the tab is had a small fingerprint on it. I used the dust remover tape and I was able to get it removed. The other small issue I had was the micro fiber cloth had a lot of particles on it itself. I am an extremely detail oriented person so these little things bother me but may not bother others. I have plenty of micro fiber cloths so it was no biggie to get one of mine. The dust stickers do work great and are handy. The screen protector goes on VERY EASILY so do not set it down on the screen until you are ready. I thought I would have to do the finger press to get it to stick like in the install video on their site but as soon as I let go it started to seal to the screen. I was able to lift it and re-position it but got some finger prints on it while doing so. On the bottom side none-the-less so I have a bottom left corner that won't seal. I don't fault tech armor for making a fantastic product. It did what it was supposed to do, I just wasn't ready for it :). After a few tries I was satisfied with the way it looked and felt accept for the bottom corner. This screen protector goes on very easily and as they suggest, I used the speaker hole to line things up. I also ordered a clear case for my phone. This one - iPhone 6 Plus Case, New Trent Alixo 6L Rugged Transparent Case. [Scratch Resistant] [All Clear] for the iPhone 6 PLUS with 5.5 inch screen case. [Black + White Built-in Screen Protector Included] -**Anti-Scratch**. This case fits the screen protector perfectly. I had a little issue at first where the case was lifting the bottom right side of the glass screen protector but it was the way I had snapped the phone into the case. I was able to adjust it and it doesn't pull on the glass at all. I am attaching some pictures with my case on so you can see how clear this is and looks when you have a thin case. I can also attest that it does do a great job of keeping your finger prints off the screen. I usually have to wipe my screen a few times a day. So far, I haven't had to once today. I may have to buy another because I know the corner is going to drive me crazy. These are priced extremely well and no complaints there at all. I will be buying one of these for my iPad Air for sure. In the photos You can see the bottom right side where the case pulls up the glass protector. A couple minutes after taking the picture I had figured out what I did wrong and got it to seal and it doesn't pull on it at all. On the bottom left you can see where it doesn't seal but this is not due to a faulty screen protector. This is due to me pulling it off 4 times to re-position so it must have bent it a little in that spot so it doesn't sit flush. I also took a picture of the top where I know many are concerned about what they may receive. I ordered this on November 7th and I received exactly what I wanted. This does not have the U shape as in the picture on Amazon which was a relief. The only thing I would ask is that the little plastic rubber piece used to push out the bubbles ( I had none to push out ), could be made to help lift the glass without needing to pull on the corner as I did and possibly damage the product. In this way you could slide it under the glass to help lift it off if you did not get it positioned correctly. That could be tricky to pull off because of how well this seals to the glass but hey, one can ask :). The feel of the glass is just as good as the iPhone itself. The clarity and touch sensitivity was not noticeable to my eyes or fingers. I give it a 4 star because I had the finger print on my protector out of the box and the particles from the micro fiber cloth. The screen protector itself gets 5 stars. For those that say it doesn't fit the entire screen. You do not want it to. Do a little research and you will find tech armor has done a ton of research to try and work this out. With a case on and the screen protector along with it, you won't even notice. I think most will put a case on their shiny new phone so for the majority it won't be an issue. For those of you that like your phone naked, well, I don't think you will even notice after a short amount of time and you will be much more pleased knowing your phones screen is so well protected.

My review is on the "HD Clear Ballistic Glass Screen Protector". Having installed many screen protectors of various types on iPads and iPhones since my 3GS I was pleasantly surprised that the application of this product was as easy as it was. I would only choose these screen protectors now due to: - Quality: They are excellent quality in materials and finish. Tech Armor do stand by their product and if it doesn't live up to their high standards, they will replace... even when not their fault!!! - Ease of application: Yes, it's different to the plastic type, but follow the directions and it IS easier ... based on many experiences with both types. - Protection: Really does protect to a standard beyond the plastic type. First hand experience, read below. - Transparency: This screen protector doesn't degrade the screen quality at all. Side by side with typical plastic protectors, this is clearly superior. Application - Read carefully ~~~~~~~~~~~~~~~~~~~~ The biggest thing to be aware of (and the directions are excellent) is that this is a solid rigid piece of glass which is placed across the entire screen surface in one action. The plastic style are more typically 'rolled progressively on' from one end, to ensure bubbles etc are removed. To ensure you get it right: Read the directions carefully and look at the demonstration videos. Based on the application of 4 TechArmour Ballistic screen protectors (2 x iPhone 5S, iPhone 6+ & iPad Air), these have been consistently easier to apply then their flexible counterparts. Incredible REAL protection ~~~~~~~~~~~~~~~~~~~~ From first hand experience, these provide INCREDIBLE protection. I dropped my iPhone 5 a few years ago while changing the SIM on a trip and the screen was cracked so badly that phone was unusable. At that time I was using a regular plastic screen protector. With my 5S I also dropped it on one occasion in a manner similar to the first and similarly large cracks appeared across the screen BUT I later discovered these cracks were only through the Tech Armor screen protector and there was NO DAMAGE to my phone's screen. I was honestly very surprised when I removed the cracked screen protector and it came off in one piece (not all layers had been damaged) and my phone's screen had absolutely no damage. As important though was that the phone remained fully usable despite the cracks! Incidental scratches are a thing of the past. I try not to put my phone in my pocket with my keys, but inevitably it happens at times and it's never resulted in a mark. Comparatively, friends with plastic type protectors have obvious blemishes and marks present. Transparency ~~~~~~~~~~ It was often a frustration for me in the past that I'd buy a wonderful device like my iPhones only to have their screen quality diminished consequent to screen protectors. Finally, with these, this is nolonger an issue. I cannot see any visual reduction in image quality when this is installed on my 6+, in all aspects such as sharpness, colours, blemishes, etc. Finger marks also seem to collect on this less then some of the plastic variety and with a soft cloth (I use the microfiber ones that come with glasses) it's easily cleaned. Not to the edge concern ~~~~~~~~~~~~~~~~~~ I don't believe this is as significant as some think. I have a regular shell type case which effectively protects the edges. There's a slight gap between the case and the glass which doesn't detract at all and has even received positive comment. The Ballistic glass is thicker than most plastic protectors, but is still lower than the height of the bumper type case. I believe what's critical is whether the edge is exposed and in my setup it's no issue. My only slight criticism here is that a small number of scrolling activities that are right on the edge of the screen seem a touch (excuse the pun) harder as your on the edge of the protector, but not to a degree that renders it unusable. Summary: ~~~~~~~ Read the installation directions carefully and look at the demonstration videos. These will help you understand the correct technique and give you the confidence to do it right. Based on the use of 4 Tech Armor Ballistic screen protectors (my last 4 related requirements which were all bought through Amazon), these protectors have been consistently easier to apply. Most importantly, since using them I've not suffered any screen damage. If I bought a new device today I would buy this product again without any doubt. UPDATE 23rd May 2015 A few weeks ago, something smashed into the pocket in which was my 6+ and my keys. I believe the impact of the keys on the screen caused the protector to break. With considerable nervousness I removed the screen protector to see how bad the damage to the device was. There was ZERO damage. What's more, I contacted Tech Armor who promptly supplied a replacement. Installation of this protector was as easy as the previous 5 I'd done (2 x iPad, 5, 5S, 6+) AND as on each previous occasion the installation was successful. GREAT PRODUCT AND GREAT AUTHENTIC WARRANTY. Wouldn't consider another brand at this point for this type of product.

Rating: 5/5 Introduction: This is my first tempered glass screen protector and my third Tech Armor product. I was very excited when I first ordered this product, already owning a regular HD screen protector on both my iPad and my old iPhone 5, I was highly impressed with the quality of the product, without any hesitation I ordered a tempered glass screen protector for around $12. My screen protector arrived on time ( I preordered this). And I installed it 3 weeks later when my iPhone 6 Plus arrived. Do not buy this screen protector if you use a case which as a built in screen protector (OtterBox Defender or Lifeproof) your touchscreen will not respond will with an additional screen protector (based on past experiences with regular screen protectors). This is a one time use tempered screen protector. Although, Tech Armor Lifetime Warranty states that it will replace your screen protector if it is not installed correctly (Mine was installed flawlessly). They also offer a 30 day money back guarantee if you are not completely pleased. Installation Instructions: When opening the package, everything was packaged securely and everything was branded with logos nicely. See the picture attached for before I installed the screen protector. Please sit down in a comfortable place when installation and install on a flat surface. Turn your phone OFF so you have a blank screen to work with you don’t want a random notification distracting you. When installing wipe with the cleaning wipe, it is safe to put it on your screen, it is dryer than you might think it is. Wipe the whole screen thoroughly with the microfiber cloth. For additional cleaning use the included dust tape, by holding one end of the tape as you stick the other side to your phone screen. DO NOT touch your phone when doing this, you do not want hand oils/fingerprints. Once you have cleaned the screen pick the screen protector up. There should be a green pull tab, this is the sticky side which will go face down on the phone screen. Before peeling, I placed the screen protector in the desired position, and tried practicing putting it down. HINT: It might help if you bring your elbows into your chest for more stability, but this is up to you. This is a one time use screen protector, please do not mess it up, although you can remove the screen protector it will be difficult when it is fully applied. Once you are ready to peel, place your fingertips on the edges of the screen protector. I recommend starting on the top and aligning the front facing camera with hole in the screen protector. If you misalign the top portion, now would be the time to fix it. Remember always keep your fingertips on the edges on the screen protector. Once the top is properly aligned, slowly align the bottom portion. Let go of the screen protector, lightly tap the center of the screen protector, to push adhesive side into place. Then run your finger from the top of your phone to the bottom (Staying center). Same for left and right. This will remove any large air bubbles. If any small air bubbles remain, just wrap the microfiber cloth around the edge of the included squeegee and push the air bubbles to the edge. Once all air bubbles are out, gently wipe the whole front display with the microfiber cloth and then you’re done. My Review: I always struggled with traditional screen protectors, I would always get air bubbles and would take me at least 10 minutes to remove the tiniest air bubbles. When I installed this, I saw the air bubbles remove themselves without me touching the screen. That was a true WOW moment for me, never have I experienced that. I just had a small air bubble near my home button which i was just able to remove with my finger in 2 seconds. The actual glass screen protector is as smooth as the phone screen. And when Tech Armor states 99.99% clarity, it looks like a 100%, this is the clearest I have ever seen a phone with a screen protector on top. Reading the other reviews, reviewers have made comments that the screen protector does not cover the entire screen. This actually does not bother me, with that additional open space on the screen, I am sure that I can slip on any case without it touching the screen protector. And I can easily unlock my phone with the Touch-ID Home button without any interference from the screen protector. Yes, you will feel the thickness but it doesn't bother me too much, and I can actually locate my home button quicker, without looking at my phone. Since this a tempered glass screen protector if you drop your phone and your screen protector cracks (since it is made out of glass) it will stay shattered to the screen. If you need to remove the screen protector, take the squeegee or a credit card and starting in a corner slip it under the screen protector and push down towards the screen, it should pull up and you can peel it off. I highly recommend this screen protector, for the price of $10-$12 it is the cheapest, high quality tempered glass screen protector I have seen to date.

Update March 2018: 1/5 stars December 2017: I've had my screen protector on my phone for 2 months now, so I feel like I can write a pretty fair review. 3/5 stars overall Installation (5/5): easy to install, no bubbles, no dust (thank goodness). The alcohol pad and microfiber cloth are handy and get the job done Design (5/5): I was very nervous about the front facing camera being covered by glass, but it hasn't impacted my front facing photos. The earpiece cutout is easy to line up as is the home button cutout. I actually like the design of the home button cutout (how it's open at the bottom). It helps me line up my finger. Integrity (2/5): Like I said, I've had this on my phone for 2 1/2 months and within 2 weeks, I already had scratches on the screen protector. I don't throw my phone around, it goes into my purse and very rarely does it come into contact with hard objects like my keys, but I shouldn't fear that my GLASS screen protector is going to get scratched up by one very dull house key. After about a month, I noticed that I had a very small chunk of glass missing by the home button. I attributed this to the fact that it's pointed right there, so it's probably the most susceptible to breaking. But about a week ago, I noticed that I have another small chunk missing from the side. I have a phone case on my phone that wraps all around it and covers all sides, so I am really bamboozled as to how this chip got there. At least the chips aren't sharp. They're really small and when I first noticed them and ran my finger over them, the glass kind of just fell off like tiny crumbs. So odd. **Update March 2018** Integrity: 1/5 I dropped my phone from about 3 feet onto a soft wood floor and the screen cracked in two places across the screen. Luckily it's the protector and not my actual screen, but still. Also, I continued to randomly get chips on the side of my screen protector and then the screen protector would start to bubble. It started off as small bubbles, but now they span the entire length of both sides of my screen protector. I'm buying another protector from another brand because this is not working it for me anymore. I'm really hoping that my chips are the result of a very unusual defect, but I've had glass screen protectors from other companies that hold up much longer than this before showing wear and tear. Bottom line: Would I recommend this to a friend? I'd tell them about the screen protector that I had. I'd also tell them that there are other options out there that they should explore first unless they don't care about minor chips and scratches.

I love tech armor and I have used the tempered glass on my previous phones with no problem. I should actually do a review on the 5s screen protector too because after a few weeks, a massive bubble appeared near one of the edges and would not go away (there was no indication that the edge was pushed up). This review is for the iphone 6 plus (5.5 inch) tempered glass. Tech armor's overall quality is AMAZING. I love that i never seem to scratch the actual protector itself. I have yet to shatter any of my previous tech armor screens, but the fact that I retain clarity and touch sensitivity of the screen (as if it was not there), I always come back to them. I understand that the iphone 6/plus has a new curved display which will cause the edges to come up. After installation, regardless of how careful I was, I was left with edges on both sides (I even tried to realign it a couple of times with no change, actually caused a spec of dust to go underneath). Clearly this is a little bit too long and they should trim a few more mm off the edges (remember if you are using this with a case, the main protection really need is the flat parts, you would RARELY drop your phone near the curved edge. I also do not like how they have the speaker and home button cut off at the edges. My previous 5s screen was completely closed off in this area and it was not noticeable that I even had a protector on (another plus for the previous generation screen protector). The previous tempered glass did not have a front camera cut out where as this one does. I personally do not feel a need for a cut out as this is glass and the previous generation had the glass cover OVER the camera, I never had a reduce in quality of pictures. I know this protector will do its job in protecting my iphone 6 plus screen, but these aesthetic problems are the main reason why I am giving it 3 stars. If they come out with a redesign, shorter edges (keeping the screen on the flat surface of the screen) and no cut off of the home and the speaker, as well as keeping the front camera cover (without the hole) I will give it 5/5 stars! Guys at tech armor, please take into consideration about these recommendations. I love your products and knowing me and my OCD, I will most likely begin to look around from another company in search of the perfect fit tempered glass for my iphone 6 plus in the coming months. I would still recommend this tempered glass until they come out with a redesign if you are not OCD like me, itll still protect you from scratches and drops, but it is not as hidden as it should. Please tell me when you guys come out with a redesign and I will do an edit on this review with a 5/5 rating!!! Another thing about this Tech Armor is that they have great customer service and they really offer a life time guarantee. When I got a replacement phone due to water damage, after my request they sent me another screen free of charge (I did not even need to pay for shipping)! This company is great and the respond to emails quickly, placing customer satisfaction first. I know they will be reading this review and I look forward to hearing back from them. Thanks!

Fantástico producto, lo tengo en un iPhone 6 Plus, no cubre toda la pantalla al no ser curvo... La sensación es como tocar el cristal original, y la luminosidad de la pantalla no se ve afectada. Facilísimo de colocar, no se puede pedir más.

Tenía dudas de pagar 160 por un protector de pantalla para mi teléfono después de haber usado un sin fin de protectores de plástico que se rayaban y no protegían de todo el celular. Este protector cumple con todo lo que esperaba. No se raya tan fácil, la facilidad con el que se coloca es increíble y no disminuye el tacto de mis dedos y el touchscreen del celular. Espero no tener que probar la garantía de por vida que ofrece el producto, pero me gustaría para probar el soporte del producto. Recomiendo este producto. Si tienes un iPhone, no dudes en comprarlo.

I ordered mine about a month before the 6 Plus release. I was impressed that it came so fast. Because I was soooo worried that I might mess up the installation of my Tech Armor screen, I bought a separate hard case with a built-in screen so I had a back up. Almost a year later, I still had my phone in the hard case with the built-in screen. But it bugged me so much that dust kept getting under the built-in screen that I finally worked up the courage to install my Tech Armor screen. I was so surprised that the Tech Armor installation went so smoothly!!! I WISHED I HADN'T WAITED A YEAR TO INSTALL IT!!! To avoid dust getting under the screen during installation, I ran my shower for about 10 minutes first. I made sure I dusted my bath vanity well. I left the shower running while I did the installation on my bath vanity. The humidity helped make sure there was no dust flying around. I followed the printed and video installation instructions. I was surprised that the screen almost attached itself automatically to my phone screen. No air bubbles at all. I wasn't completely happy with my alignment so I immediately lifted the screen again taking care not to touch the sticky side nor the face of the phone. I repositioned the screen and once again it attached itself quickly and smoothly to the phone. I used the squeege wrapped in the microfibre cloth to smooth the screen outward from the centre. I had no air bubbles whatsoever. I'm so happy with the way the screen looks! The touch screen responsiveness is still good. It is so easy to keep the Tech Armor screen clean and spotless. I ended up peeling off the built in screen from my hard case and put the case back on the phone. Together, my hard case and my Tech Armor screen keep my phone well-protected from dust, scratches, and drops. I definitely recommend this product! I do agree with other posts that the Tech Armor glass only covers the flat part of the iPhone 6 Plus but I don't know if there is technology available yet to make a curved glass screen to go on top of the iPhone's curved edges like a glove. I wouldn't use just this glass screen to protect my phone. I think a hard case is till a must in combination with the Tech Armor screen.

Il prodotto é perfetto e di buona qualitá. L’applicazione sullo schermo é stata facile grazie anche agli strumenti che ci sono all’interno :pannetto pulizia e pellicola cattura polvere. Il prezzo é più che ottimo considerarando che ci sono due pellicole all’interno. Tempi di consegna Prime e imballaggio impeccabile.

Packaging au top, livré dans les délais Ayant déjà acheté le même type de produit chez Zagg, là pour 3 fois moins cher, vous avez un produit de qualité équivalente voire supérieure avec la Life Time warranty. Mode d'emploi en anglais mais très facile à poser Mise en place facile mais attention c'est limite une opération chirurgicale qui demande un doigté et de la minutie. Le tactile reste identique (iPhone 6s plus) Les couleurs et la luminosité restent clairs Pas encore testé sur les chocs Je valide et recommande !