RSH-319

This device simply did the job. It yuned my old 1Tb HDD into a very useful backup drive eith no other set up required other than to repartition the HDD and format it to NFTS. I have seen criticism of this case as being fragile plastic. It is plastic alough I would not say fragile. Buyers are likely to do nothing more than keep it sitting on a desk by their computer and it is easily strong enough to withstand everyday knocks and bumps. It has supplied screws to secure the drive. It is fast in a usb 3 socket. There are cheaper devices but I consider the price of £18 I paid very reasonable. The cables aren't that long but I doubt whether that will present a problem to most users. I'm happy with it as a back up for my 1 Tb laptop info using Grsync for convenience. Cables are about 1m long. It takes 2.5 & 3.5 inch drives up to SATA III. It is supplied with a PSU for 3.5 inch drives. It is supplied with screws to secure 3.5 inch drives that are heavy beasts. It is fast when used on usb 3 host sockets. Ideal for desktop backup.

Super, works perfectly and comes with mounting screws and even a little screwdriver.

I'm using this to connect a 3.5 inch Western Digital Green 1.5 TB hard drive to my new Beelink Mini-PC. It’s my main storage drive as it was removed from my old desktop so I needed decent data transfer speeds. Good points: Fitting the drive is very easy. Slide the top cover off. Insert the hard drive and secure it to the unit using the supplied screws. Replace the top cover. Power up the unit using the supplied power adapter. Connect it to your PC or laptop using the included USB cable. That’s it. It uses USB 3.0 so ideally you should connect it to a USB 3.0 or higher port for best data transfer speeds. In real world data transfer tests I’m getting 60-70 MB per second read speeds (95 MB/s peak) and 45-55 MB per second write speeds. It powers down when not used for a while which preserves your hard drive a bit. It then takes a few seconds to spin back up when you subsequently go to access data on the drive but for me that’s acceptable. It’s a very cheap and easy way to connect an old 3.5 inch desktop hard drive to a PC or laptop to expand your storage or to backup your data. Not so good points: Build quality is not great. The top cover slides off almost too easily and the plastic case and connectors feel a little brittle. It’s not pretty either. Thankfully, in my use case these are not important as I have no need to access the case on a regular basis and it stays permanently connected to my Mini-PC. As it’s hidden on my desktop under a shelf unit, I don’t even see it! However, if I was looking for a case to use on the move or one to use with lots of different drives or with lots of different devices, I’d be concerned about its robustness. Recommended with caveats.

Great caddy for external storage needs for 2.5 and 3.5 drives. Vented at bottom for heat dissipation and seems to deliver full USB 3.0 5 Gbps speeds and SMART status abilities in latest MacOS Tahoe, so you can ensure drive health is overseen - which is important for backup needs. Plastic case which has a top section that slides out to change drives and you can secure using screws and a screwdrives supplied with case including a decent length USB cable along with the power supply.

Needed a way of accessing files on a couple of old hard drives and this worked perfectly. I was able to remove all the old files I wanted and then did a full format so they can to recycled without worry of my data being accessed. It was didn't straight away and had good transfer speeds for my old HDD. No sound apart from the normal hard drive sounds. Comes well packaged with all the cables you need including a UK power supply. Has screws to secure the HDD in place if using for a long time but no tools needed if only using for a short time. Good quality with excellent features (power button, sliding top and lights for power and HDD accessing. Great product 👌.

All I can say is for the price, this was a great product that worked straight out of the box with no hassles whatsoever. I had a older SATA 3 HD with a lot of media on it that I wanted to re-use and have it accessed across a small home network via my Modem Router which has a USB 3 port. The RSHTech Enclosure is very basic but in a good way. You slip of the top cover, place the HD in slotting it into the SATA port close the lid and screw in 4 small screws...Thats it. I then attached the power cable and the USB cable to test on my PC via USB 3 and Windows immediatly recognised it and allowed me access. The speeds were more than good enough as it is a big step up from USB 2. Then I attached it to my router's USB 3 port and again it was instantly recognised and worked by playing my media without any issues over the network. Overall, for the price, you cannot go wrong...

I bought this product to convert a 3.5“ 1TB hard disc into an external USB drive. The disc was spare after exchanging it for a SSD, and I want to use it for backups. The case arrived well packaged, complete with UK power supply, USB cable, screws and a small screwdriver. It is simple to install the disc and it worked straight away. The connectors seem to be of good quality and it all has a solid feel. To install, you remove the lid (slides back and then lifts off), insert the drive and screw it into place from the bottom with the four screws. The supplied screwdriver is small but adequate, though I preferred to use my ‘proper’ screwdriver. I had to hold the disc in place with a finger when I turned the case upside down, so the lid had to remain open until the screws were in place, but it was not as fiddly as it sounds – once one screw is in, the rest just follow. The lid only clicks shut. There is no catch and it can come open rather easily, so remember that when holding it or it could slip and you might drop the case. It’s only plastic and probably wouldn’t survive a drop, but then, the disc probably wouldn’t either… The power connector goes to a compact ‘wall wart’ power supply, but the lead is only 113cm long – OK to use with a skirting board-height mains socket if the table is right next to it but that is all. The supplied USB cable is 96cm long, which is barely enough to reach from a desk to a PC on the floor beneath it. At one end is a standard USB-A plug; at the other a USB 3.0 type B plug. Both have blue tongues to indicate that they are USB 3.0 standard. Once it is all plugged in, you press the On switch and it all comes to life. Hint: In Windows, if you are using a brand new disc, you need to visit Disk Management to initialise the disc and create a partition on it. As I was repurposing an old disc, I wanted to delete all the partitions and create a new, large one so I could use the whole capacity.

Got this for a friend as he just uses a laptop now. He had a 2TB hard drive from his previous PC with loads of music he's collected over the years. So a gentle push on the top of the case and the top slid off. The circuitry that sorts the power and SATA connector plus on off switch are all separately enclosed unlike some which can get knocked about causing problems. Just the SATA port to slide the Hard Drive into. That's it, just plug the power lead in and the USB 3 lead into this case then USB 3 port in pc or laptop ( USB 2 and 3 compatible) . Press the on button and 2 led's show, one for power and other data use. Also there are screws and a mini screwdriver for those who want to screw the hard-drive to the base, which I did. Tested connecting it to my Linux Mint computer, it was recognised straight away and worked without any fuss with nothing else to do. Even using it now as I am listening to music on it as another test. Sure my friend will be pleased.

Flimsy and easy to open by accident. Cheap design and poorly manufactured.

Good value for money and quality. No complaints other than slow transfer speed, but comes with connection type. Good, affordable option to house an old hdd to use as an external.

Product is easy to open and install the hard drive without requiring tools. Looks like it is transferring data at the advertised USB 3.0 speeds. Power and USB cables are somewhat short and not very practical. Enclosure has no ventilation holes which almost caused a brand new 16TB Hard Drive to overheat. Could not touch it for a while and it actually melted the sponge strip that acts as a vibration dampener on the inside of the enclosure.