8 Ports 2.5G Switch Smart Web Managed, 8 x 2.5G Base-T & 1 x 10G SFP Slot, Support 802.3ad Static Aggregation, QOS/VLAN/IGMP, Metal Housing Network Ethernet Switch

I bought this switch because it's a managed switch. However, the switch did not come with any good instructions for accessing the web interface. I was about to return it until I realized that there is a sticker at the bottom of the switch that gives you the ipaddress and credentials for the web interface. The interface is simplistic but offers all of the features I needed - specifically my NAS has dual 2.5g ethernet ports and I was able to bond them easily on the switch.

Works as expected. The web interface is "standard" for these types of cheap managed switches. In general, the web interface works "good enough". There are a couple of small things that could be improved. 1. The "monitor" tab, shows basic information on each port, except it does NOT show connection speed. 2. As part of the "monitor" tab there is a basic diagram that makes it easy to see which ports are connected 3. For some reason, to see the port speed, you must instead go to the "system" tab, then the "port settings" subtab. 4. The VLAN configuration is basic, but easy to understand. Features: VLAN, QoS, Trunking (static or LACP), IGMP snooping, port mirroring (RX, TX, or both), port isolation, port bandwidth limits, Jumbo Frames (9216 or 16383), MAC constraints (limit the number of MAC's allowed on a port), EEE, Storm Control, flow control, STP/RSTP, per port STP configuration (including port priority, path costing, P2P/Edge) and DCHP client. You can upgrade the firmware and backup the switch configuration. The only thing that would be nice is to have the connection speed/duplex shown on the monitor screen and have an option to make the monitor screen the default. The default is "System" tab, "Information" subtab which shows the device model number, IP information, MAC, firmware version and hardware version. While this information is important, it generally doesn't change. It would be extremely handy to be able to "rename" the device. A SOHO might have a couple of switches and it could be handy to be able to rename the switch in order to describe it's location/function. A larger organization often has device names that are standardized and generally designed to make locating the device easier. The device name could also be used for DHCP, making it easier to find in the DHCP Server logs. The option to name the ports would be nice. Often businesses name various ports in order to make it easier to locate. They will name both devices and ports using a code that makes it easy to see what the device is and where it is located. If you look at ethernet ports in an office (doctor's exam rooms are easy to see), they will be coded in such a way. Then you could code the port name to match, making it easy to see if that port (and the device connected to the port) is connected or not.

worked pretty well in my setup I may buy another one when i reconfigure my test lab i have not tried the SFP port, however. I hope it will be compatible with those low cost 10G transceivers

Nice little router but couldn't get it to do trunk aggregation since the QNAP TS-464 does dynamic and this router only does static. Otherwise a decent switch for the price

Vlan is weak. You can only set up 32 devices.

Working fine for couple months then it started cause problem with slowness issue, especially download from internet or transferring speed with other computers are so slow, my speed test with iperf shown couple mbs download speed only. I have reboot and reset couple times, works an about an hours and issue keep coming back. I have remove it from my network.

Price point is great, so far, so good, but unable to locate online documentation and support if needed in the future