ModMic Uni 2

I work remotely and am on calls from my PC throughout the day. This new ModMic has been a huge upgrade for me, personally and professionaly. No longer am I wearing the ghastly mid-grade work-supplied "gaming" headset which squashes my ears, aches my head, garbles my voice, and saps my very will to remain conscious at all, which of course affects the various meetings I'm forced to be in. No longer - enter the ModMic! I've had it hooked up for a very short time to my beloved Sennheiser open-back over-ear headphones, and already it's a huge improvement to both the general quality and clarity of calls (excellent audio from the ModMic, and of course studio-grade audio from the Senns - how do people tolerate these gaming headsets I cannot fathom), and a big improvement to my general demeanor. Colleagues have already commented on these positive changes! The simplicity of the design is appreciated: while previously I was sporting the garish and distracting neon green (and *glowing*, for heaven's sake!) gaming headset, with a massive boom mic in front of my face (to what end do they make these mics so BIG -- why? Do they imagine their target consumer feels the need to subtly overcompensate for diminished stature elsewhere?), the ModMic is stylishly and confidently minimalistic yet eminently functional. As my colleagues in the UK would say: "it does what it says on the tin" and it does it elegantly. The build quality is excellent. The design is thoughtful - spare clips included so you can use the ModMic on multiple sets of headphones without any fuss. Ample cable length, with clips to lead it along my existing headphone cable - no further mess of individual cords. Easy mute switch well-located. Cord non-tangly so far! Thank you AntLion Audio team for designing and building an excellent product with the ModMic Uni 2. Highly recommended.

I don't normally leave product reviews but this is one of the worst pieces of gear I have purchased in a long while. The good -When the planets align and you are holding the mic in the perfect spot directly in front of your mouth...it doesn't sound all that bad. Just don't move your head and keep holding it. The Bad -Immediate reaction to unboxing this $60 dollar microphone was an overwhelming sense of cheapness. I've heard about the Antlion brand for years in a positive context but this was not was I was expecting. Everything here is a let down. The cable quality (that thin type of cable that always seems to retain the bends). The plastic screw-mount that the boom is magnetized to is far too weak. The mute switch housing is downright embarrassing. The casing literally came apart when I flipped the switch the first time. I thought maybe it was held together with some sort of snaps or adhesive but I have no idea how it's expected to stay together the way it's designed. -You see several reviews here mentioning issues with the magnetic sticky base. They arent wrong. Out of the box the base's adhesive was worthless due to the protective backing being haphazardly offset thus making most of the backing weak. Always cool to have to resort to the backup sticky pad minutes after opening. -My plan was to attach this to a pair of wired Sony XM4s. The initial issue was I needed to mount it on the left side so that the cable of the modmic would be in parallel with the 3.5mm cable of the XM4s. By default the ModMic Uni 2 is designed to mount to the right side of a pair of headphones. In no way did I think this would be an issue but they found a way. Their solution for converting the orientation it to the left side is to literally re-bend the mounting end of the boom (not the boom itself). The result of which makes your new $60 mic look like a twisted up pixie stick. If you need to convert the orientation I highly recommend maybe just twisting the boom itself and then reversing the mounting screw base. The issue with that I noticed is that the boom likes to start untwisting. Either way this is such a sloppy "solution" that could've been engineered several other ways. Or just engineered period. -The mic itself. So before mounting this now mangled thing to my pair of $250 headphones I wanted to test the thing first. I connected it up to a GoXLR via a Rode VXLR Plus XLR to 3.5mm adapter. Apparently Antlion previously to sold one of these adapters up until Spring 2025. Prob for the best it's retired if this was their quality bar. Anyway, no issues with the mic itself initially until it came to testing the positioning of the boom to the mouth. I quickly discovered this microphone struggles with range. Reducing the software gate to 0% I found myself cutting out when the boom was about halfway between my ear and mouth. The thing is....that's as far as I would be able to feasibly mount these on this set of headphones. I understand this might be more a fault of the headphone not having enough surface area but there's no reason it should struggle to pickup audio an inch away from my mouth. I switched to a direct 3.5mm connection to try and eliminate software variables with the mixer. Same thing. The only way I could get it to pick up voice consistently was to remove the the gate entirely and boost the gain to a ridiculous level. The obvious result was distorted audio. The irony was it would pickup a fan 10 feet behind me at times but couldn't register me. Overall -This was an astoundingly disappointing product to receive. In the post-2020 world it's become more common to buy tech that has obvious quality issues in certain departments. But this was a situation where every single aspect of this product was flawed. It's not even one of those situations where I'd say "well this wouldnt be too bad if it was priced in the $20-30 range". No, this is just a bad product. It's a bummer the Audio-Technica ATGM2 is discontinued.

For context I have paired this with an Audio Technica ATH R70x (a Japanese open-back reference headphones with good soundstage and positioning that is being sold on amazon for about $350). The mic is used mainly for gaming. The headphones for music listening and gaming. Both are connected to a Sound Blaster AE-9 (a really nice sound card). I purchased this mic to keep my current headphone (love its sound signature) and avoid mayor spending on a good combo set. So as a gamer perspective, great audio quality as is! My Helldivers 2 team actually noticed the improvement and clarity of my voice and asked my if I had changed my mic. I haven't used any audio enhancement from my sound card. This mic falls to the expensive side of the spectrum as you could buy a cheap lavalier mic for $10 of a full headphone + mic gaming set for the price of this mic. However you could also spend 20 times it's price and only get a 30% improvement on specs.... That doesn't necessarily makes it worthwhile but this is not the most expensive stuff. By the way, regarding quality, I was explained by may teammates that you could get away with a cheaper alternatives by enhancing audio with software. However on gaming you want your compute resources dedicated to get more FPS. The sticker that comes with te mic is good enough. I have been using it since the end of September 2024 without failing. The mic doesn't add noticeable weight to the headphone. My headphones are very light weighted so this mic is perfect for me.

Questo è il mio terzo modmic nel corso di 10 anni. I primi due che ho avuto hanno funzionato benissimo per lungo tempo - il primo è stato rotto con uno strattone del cavo (colpa mia) mentre il secondo lo sto ancora usando da quasi 7 anni e nel corso del tempo il bottone del muto non chiude completamente il contatto ma per il resto funziona benissimo. Avevo deciso di pensionare finalmente quel microfono comprando questa versione aggiornata e a leggere le recensioni ero un po' in dubbio. Modmic non mi aveva mai mollato e ho deciso di fidarmi, per poi ricevere una delusione bella grossa. 70 euro per un microfono e non si sprecano a mettere un adesivo decente. Non è il mio primo rodeo a installare il supporto magnetico di un modmic e a testimonianza di ciò i due supporti precedenti sono ancora sulle cuffie su cui li avevo messi, a 10 e 7 anni di distanza. Questo modello nuovo, l'adesivo non rimane su nemmeno per 20 secondi. Ho sprecato ore a premerlo in posizione ed aspettare che si curi per poi staccarsi immediatamente appena lo si sfiora. Dopo aver usato invano tutti e 3 gli adesivi, ho deciso di fare il reso: il vecchio modmic l'avevo comprato all'epoca per 45€ invece che 70 e nonostante tutto l'uso e abuso continua forte, questa nuova versione sembra proprio non valga la pena per quello che costa. Fortuna che so mettere le mani sull'elettronica, perché con un due tocchi di saldatore e uno switch nuovo, scommetto che il vecchio microfono mi durerà altri 7 anni. Peccato, dopo questo tiro mancino non penso che comprerò un altro modmic perché se sono disposti ad aumentare il prezzo e mettere un adesivo scadente, vuol dire che ci saranno altre parti in cui sono state prese scorciatoie e che non ci si può aspettare che il prodotto duri.

Collé dans les règles de l'art recommandé mais ne tient pas fixé

This Mic sounds great, but its a bit expensive. For this price, I would except higher build quality. Its not acceptable that you send me a Mic configured for right ear placement, when every website shows the default is left ear. The bending process is a huge pain, I always feel like the mic is about to break.

This is a great mic and allows me to use my Marshall Monitor III headphones as a gaming headset, which I love. Only issue was that it came bent the wrong way, so it had to be bent back the other way to be used correctly. This was easy enough to do but after seeing other reviews saying the same thing it looks like the quality control could do with being stepped up to stop this from happening.

Sounds great