Fluval Multi-Chamber Holding and Breeding Box, Medium

This breeder box has been perfect for raising my celestial pearl danio fry. It was easy to assemble, and I really appreciate how simple it is to access the inside for both feeding and cleaning. I did make a small modification by adding a sponge to the return since the provided grates were a bit too large and could allow fry to slip through. With that adjustment, it works wonderfully. Overall, I highly recommend this breeder box for anyone raising fry.

So as you see in my video I have experience with the small, and now I own the large version of this breeder box. It works great. Some reviews say people had issues. As you see, it doesn't leak and the pegs didn't break off like some others said. The pegs add and remove leverage so that it can sit correctly. You want it to be aligned perpendicular with the rim of your tank or if anything SLIGHTLY angled downward INTO the tank. You do not want the bottom of the breeder box to be pushed out from the tank. I could see that as a reason why the pegs would break for some people. You don't want the bottom too far in. I could see that causing the box to leak from the front but I dont see how that could ruin your marriage. I have my pegs on number 4 but the glass and rim is thick on my 75 gallon. Front of the breeder box should be more or less parallel with the tank. Don't put your flow too high. I have a constant drip. Maybe 1 to 4 drops per second but it needs to be dripping into the box constantly. It gives a small stream from the slit and a constant drip into the aquarium. It doesn't make lots of noise. I haven't had issues with this method in 2 years. This combined with my egg incubator is invaluable when it comes to preserving numbers. The small version does not have a lock. I don't use the lock on the big one. I dont like the design of it. I didn't need instructions because I'm not incompetent but some people may need them.

Are you like me where bubbling water doesn't bother you but sputtering water and splashing does? I ask this because if you follow the instructions of this breeding box you'll hear loud, obnoxious sputtering. I'm not quite sure why it sputters the way it does, but it was driving me crazy. So this is what I did. In the instructions, you'll see two parts, Intake Tube (9) and Discharge Cap (8). Follow the instructions in putting the breeding box together, but then do the following if the sputtering noise bothers you like it did me. Throw out the Discharge cap. Feed a three inch or so piece of airline tubing into the top part of the Intake Tube where the Discharge cap would normally be affixed. Just feed it enough to be secure. Place the other end of the airline tubing into the water of the breeding box. You'll get bubbling instead of sputtering, which for me is realms more tolerable. Other than that this is a great little box. I use it as a half semi filter, half moss and shrimp storage. Edit: By the way, when you make the fix above, make sure the airline tubing you use isn't too long. Too long and the water struggles to make it up U turn of the Intake Tube, which causes it to act like just an airpump, instead of pulling water from the main tank in. If this happens and you don't realize it can be quite bad. For instance, if your house is cold and your tank warm, the pump won't bring the warm water from the main tank into the breeding box, so the temperature will drop heavily. That's bad. You'll also be dealing with only the water volume of the box instead of the water volume of the whole tank, which is also bad. So say you have this breeder box on a 10 or a 20 gallon, and you fix it incorrectly so that it's only bringing air into the box, then you've only got the water quality of the box, which is tiny. So make sure that both water is making it into the box and that water is exiting the box through the overflow (it should at least drip constantly).

I have to be honest: when I opened the box, saw what felt like one million tiny plastic pieces, and realized I was expected to assemble this thing myself, I was instantly overwhelmed. Maybe I was just in a mood. Maybe I had already exceeded my daily allowance of minor inconveniences. Either way, I was not emotionally prepared to open the box and find a tiny 3-D plastic jigsaw puzzle with its own plumbing. Thankfully, the instructions were clear, everything fit together properly, and I was able to assemble it without much difficulty. Was I cheerful about it? No. Was it actually hard? Also no. I was simply being dramatic. Once assembled, though, I was genuinely impressed. This box is extremely well engineered and feels sturdy and well made. It includes a bottom insert that can be used to allow fry to drop beneath it and remain separated from the parents. It also comes with two divider panels, so the box can be configured into as many as three separate chambers. I am not currently using the bottom insert or the dividers, but I appreciate having those options. There is also an additional grate that helps prevent tiny fry from escaping through the outlet and returning to the main tank, where they would presumably discover that life is cruel. One of my favorite features is the adjustable water-flow control. Water slowly drips into the box and then flows back into the aquarium, providing continuous circulation without turning the enclosure into a tiny aquatic water park. The flow can be adjusted to a very slow, gentle rate, which is ideal for fry or other delicate inhabitants. One important thing to know is that an air pump is required to operate the continuous water-flow system, and the pump is sold separately. Fluval does make that clear, so it was not an unpleasant surprise, but make sure you already have a compatible air pump or purchase one along with the box. Without it, you will not be able to use the slow, adjustable circulation feature, which is one of the best things about this setup. I am actually using mine to house and breed California blackworms rather than fish fry, and it works perfectly for that purpose. I placed a shallow layer of gravel directly in the bottom of the box without using the bottom insert. The worms remain completely separated from the rest of the aquarium while still receiving fresh, filtered, continuously circulated water. The holding box also stays comparatively clean, which is impressive considering blackworms are not exactly known for respecting housekeeping standards. Overall, this is a thoughtfully designed, versatile, and highly functional breeding and holding box. It does exactly what I hoped it would do and gives me far more control than a basic breeder net or container. 10/10, absolutely recommend… even though assembly is required. (It really was not difficult. I simply needed a moment to process the betrayal.)

I love this little box for my pregnant shrimp! It easily fits onto my 75 gallon aquarium. I currently have 5 pregnant shrimp in here. They seem to have plenty of room, for now. I’m not how this will work or if I’ll be able to save babies. I’m certainly going to try. The box was super easy to set up. It only took a few minutes. I was worried because the directions said the aquarium water level had to be within 2” of the top. Mine is not. I have it lower than that. Thankfully, it works just fine. I get a steady stream of water pumping in and flowing out. I think this little box is genius! I’ll probably use it to house some plants or maybe other fish babies, in the future. Also, I wrapped a little quilt batting around the output to prevent anything from getting dumped back into the aquarium.

I really like this breeder box. We used to have one that sat in the tank and you would have to manually pour water into it to clean it. I really like how this one keeps the water clean on its own. I bought the large breeder box to house five baby pea puffers while I wait for my other tank to finish cycling. I saw a lot of people complaining about it being loud, but I don’t think it’s loud at all. It’s made out of very sturdy plastic and I like how it can be adjusted to fit different size tanks. The instructions aren’t great, but if you look at the pictures, you can figure it out.

Seemed like a good idea, but the fry went right through all the strainers and right into my main tank. Worked great to isolate the mother, though.

The breeding box is amazing; it comes with its own tubes. You can change the water pressure going into the box as well. It hangs outside the aquarium and has a lid. You can also attach an airstone if needed. The water flows perfectly from the aquarium into the breeding box and back into the aquarium, so you don't have to worry about water changes. It doesn't need an additional filter. I have used it for my mystery snails and also for fish/shrimp acclimation. The box is a pretty good size, easy to use, and very stable. I definitely recommend getting one of these breeding boxes.

I have tried different types of breeding boxes and I consider Fluval holding and breeding box the best among them. It has everything that you need for an aquarium hobbyist. The size is very convenient comparing to others while I wish if Fluval can make a bigger size also. This is a complete set and you won't regret buying it. I highly recommend it.

İçinden hortum ile bağlantı plastik çubuğu çıkmadı iade edildi.

The concept of this product is really good! Very useful in raising baby fish!

Item as described, works well, just what I was after

Werkt top