PCCOOLER C3T500 ARGB PC Case Mid Tower Desktop Computer Gaming Superior Case for ATX/M-ATX/ITX with 6 ARGB Case Fans,Column-Free Design,360MM Radiator&400MM GPU Support,Easy Installation (White)

I’ve been eyeing this case for a while, and finally bought it when it went down to $63. Its honestly way better than I expected, the design is just so clean and sleek, with heavy, quality components. It comes with fans, which are actually pretty good quality so I left most of them in, which is nice because I was prepared to buy more. I didn’t take a picture unfortunately because I was too excited to swap over my parts, but when I opened the back the cord management was INSANE. It was so organized and neat back there you could easily find everything and honestly made the whole process so much quicker. I cant say its still organized after I put in my parts lol but thats just me 👀. There are vent points on the top, back, bottom, and left which is suuupeer good for airflow and also where all the fans go. It has a nice big section in the back of it, where basically every part besides your fans, graphics card, motherboard and cooler are hidden in the back as well, which I also love since my old case didn’t have much space except for cords in the back 😵‍💫 It isss meant for smaller motherboards though, as the case itself is very short and fat, which is why I got it. Most cases would look empty with my tiny motherboard so this one was just perfect in every way for me. Ignore the fact that two of my fans are backwards I fixed them shortly after. In case anyone wanted to know what fan connection I used its the ShakingTank ARGB and PWM Hun, 9 Ports, just look this up on amazon it’ll come up. It was $11. My mother board size for reference is micro atx

The case was designed to have minimal height for an ATX board. It was an easy build with a mATX board! I am not sure what the bottom clearance would be for cable management with an ATX build. There are 3 reverse blade fans (bottom 3) and the rest are regular fans (2 side and 1 rear). I opted for an AIO to exhaust through the top so the 2 side fans have to be flipped to intake airflow, showing the backs of the fans. Note the fans max speed is 1100 RPMs so it may not be suitable for high energy rigs. This build does not generate alot of heat with a 65W CPU (9700X with PPT limit at 78W and Curve Optimizer -30 all cores) and a 160W GPU (16GB 9060 XT). The included fan controller has both the 4 pin PWM and 3 pin ARGB connectors for each fan and powers by a sata connector.

Muy bien producto

I built a custom loop in this case. Transferred my system from a lian li a3 to this. 7950x, 3080 ti, Asus b650 e I, Corsair sfx 750. The fans that come with the case are more impressive than I thought they would be. There's a decent amount of airflow from them, so far work well on radiators. Rgb looks pretty nice and this is the only case I've ever had that came with 6 fans. Equally awesome. It comes with a pwm/rgb hub and is (poorly) already cable managed into the hub. The hub has room for 6 more fans. On the fan hub, they did a pretty cool feature. The top of the case has an LED button where you can go through a ton of colors and patterns for everything connected rgb wise, or you can hold it to throw the control to your motherboard instead. Outside of the led button, the top comes with 1 USB c, 2 USB 3.0 and a power button. There's a lot of room for cable management in the back. You could make even more room if you weren't planning to use the dual HDD bracket that's pre installed, but I used that with some adapters to mount 3 SSDs. The top, back and bottom have magnetic dust filters. Installation was extremely easy. I'm used to building in sff cases and felt like I had the world of room here. Currently I have 2x240 radiators and 1x280 radiator, but I am going to upgrade to 1x240 and 2x360 soon. The top and bottom can accommodate 240, 280 or 360mm radiators. The side can only have a 240 radiator. Couple things I don't like. The case is built out of a weaker metal. There's some flex. The cable routing holes are plenty, but there's no grommets to hide what's behind. The motherboard tray doesn't have a cutout to access the rear nvme drive that most motherboards use, I'm assuming this is due to the weaker metal they used and keeping the case structure intact. All in all, I think this is a fantastic case for the price. You get quite a bit of bang for your buck. Other case manufacturers should learn from their included good fans and hub.

This PCCOOLER C3T500 ARGB PC case delivers a striking column-free panoramic view through thick tempered glass panels on the front and side, letting your build and RGB lighting shine. It comes pre-loaded with six 120mm ARGB PWM fans (including reverse-blade ones for intake) that provide excellent airflow right out of the box, keeping components cool even under load. The mid-tower supports ATX/M-ATX/ITX motherboards, up to 360mm radiators, and long GPUs up to 400mm, with plenty of room for cable management and easy installation features. Build quality is solid with 0.7mm steel construction that feels sturdy yet lightweight enough to handle, and the black finish looks clean and modern. Assembly went smoothly thanks to the thoughtful design, though some minor cable tidying was needed initially. For the price, it punches well above its weight with premium features like full ARGB control and strong thermal performance that rivals more expensive cases. Minor note: it fits full ATX boards but can be a bit tight in certain configurations, and standoffs may require checking. TL;DR: Excellent value mid-tower case packed with 6 ARGB fans, panoramic glass, and strong cooling support. Highly recommend for gamers and builders wanting a stylish, high-airflow setup without breaking the bank.

Los ventiladores no tienen nada de velocidad máxima

I'm very familiar with various PC cases. It seems a good value for the price, it's easy to use, and matches the product description. The quality is good, but not great. You can see where they cut some corners, like thinner metal, and lack of cable management grommets. However, it's a very good looking case with good airflow with the installed ARGB fans. It's also pretty lightweight due to the thinner metal. There's decent room for cable management, but they didn't go out of their way to make it noteworthy in any way. The white color is popular these days, and does look nice.

The fans didn't work it's too small

総合的には、いい製品。ファンも付いていて、組みやすさもいいと思う。ただ吸気ファンが底面の３連ファンだけで上面に水冷のファンを排気でつけると思うけど、そうしたら、排気が６個になってしまう。元々付いている縦2連ファンもリバースファンにしてくれてたらサイコーだと思う。

簡単な説明書は付いていますが、わかりにくい部分がありました ①パネル面の通常あるリセットボタンの位置にLEDとの表示がありましたがリードの先端にはリセット端子の表示のままでしたのでそのままつないでしまいました。従ってLEDの色が変わらずオレンジ色のままでした。調べてみたところこのリセットの表示の端子をLEDコントローラーの基盤に挿すところがありこれに変更して解決となりました。従ってリセットスイッチは使うことができません。ご注意を ②hdd等の取付金具はねじ4本を外してから金具が持ちやすくなっており取り付け取り外し時には使いやすく感じました(細かい設計がされているようです) ③ファンがついているのでお買い得ですがATX基板の取り付け時等には取り付けねじが締め付けにくいので取り外して再度取り付けが必要です まあ多少の不満はありますが全体的には良いものではないかと感じました。

初めての自作pcに使用しました。 ATXマザーボード対応ですが他の方のレビュー通りかなりギリギリで、ケースファンを外さないとマザーボードに配線できないことがあり、大変でした。ファンに干渉しないように工夫するのは結構面白いので私的には良かったです！

めっちゃかっこいい！

この価格でファン6つ付属のケースが購入できて嬉しいが、ファンが着装されている状態で届いて、ファンの方向と配線を調整しなくてならないので手間がかかります。しかもファンの向きは明記されていません。 届いた状態のままで使うと、排気ばっかりでエアフローが悪くなります。 エアフローが気になる方、ファンの支柱が見えて嫌な方は要注意です。