4u Server Chassis,Rack Mount ATX Pc case,3.5″ Bays,1xFan,2xUSB3.0

Es una caja de servidor básica, por el precio y disponibilidad cumple y ya En primer lugar los tornillos son lo peor ya que es fácil que se barran, o no entran (por sierte trae varios) trae un ventilador pero no tiene el adaptador por lo que necesitas comprar otra pieza para conectarlo El conector de USB frontal es ligeramente más grande y tiene un gancho al fondo, por lo que si lo conectas es casi imposible sacarlo!! Tirne pocas opciones para adaptar configuraciones el espacio es adecuado para una pc con gpu

The case does everything one could want in a general computer case; it encloses computer components. There are no frills in a cheap case, but that's why one would purchase a case like this one. The case is made of surprisingly thin steel, and that initially seemed like a bad thing, but it does make the case light and yet it still seems to be reasonably sturdy. In the end, it seems to be more of a feature than a quality issue. This fits a standard 19" rack. A couple of items are of note: 1) The case sports two plastic handles. These are clearly for use if you're using sliding rails. They are not sufficiently sturdy to use them to lift the case. 2) The fan that comes with the case is single-speed and very cheap. Replace it with a Noctua NF-A12x25 PWM (ASIN B07C5VG64V) fan to quiet the server and allow for fan control. Also, the fan mount contains a thin dust filter, but no sort of grill to keep the dust filter out of the fan blades. Adding a grill between the dust filter and the fan is a good idea. After getting this case installed in my rack and living with it for a bit, there are a couple of things that are wrong with it: 1) The aforementioned filter that was threatening to be sucked into the fan? There's no good way to clean it. To access the filter, you need to remove the fan. To remove the fan, you need to remove the drive bay in front of it. To remove that bay, you pretty much need to remove the whole drive mount assembly from the front of the case. Just something of which to be aware. 2) This *is* a rack mount case. There are two ways it can be mounted, either fixed using the flanges on the front of the case or via sliding rails. Sliding rails are convenient and the case does have threaded holes along the sides for sliding rails, so I went that way. Some reasonable rails to match this case are the Rosewill rails (ASIN B0D9NL6WJW). There are nicer rails out there, but these are relatively cheap and work well. At least the rails would have worked well if the holes for sliding rails were drilled to match a standard 1U, 2U, etc. Rather, the holes are aligned vertically at the midpoint of the case, meaning that the holes fall at the bottom of 2U from the top. That makes mounting the case using the existing holes require a 1/2U gap at the top. So, new holes are your friend! If you don't already have them, NEIKO 02639A 6-Inch Automatic Center Punch (ASIN B08KGF7ZFQ), Metric Tap & Drill Bit Set, 2Pcs M4 (ASIN B0F291HS9Q), and Piutouyar M3-M12 Adjustable Tap Wrench Handle (ASIN B09F312N5R). Measure the new holes to fall 1/2U below the existing holes, punch, drill, and tap. That'll fix the alignment within your rack. 2a) I'm not sure if this is particular to those Rosewill sliding rails or if this would happen with any rails, but only the front two holes can be used. When I put screws in the rear rail holes, something was hitting when I tried to push the case in. After removing those rear screws, everything worked perfectly.

It has flaws, but is an affordable option in an otherwise undersaturated market: rack mounted standard PC cases. I would love to have my computer or nas in a rack mounted chassis rather than a tower that has to take up desk space. Building in this thing is not bad, but the drive rack is a pain, and needs to be uninstalled in a very annoying manor in order to do just about anything. Also, the front panel cables and connectors look as though they could route through a gap in the drive rack, but they can't, and instead have to go through it and eat up space that could otherwise be used by a drive. This means that the drive capacity is technically 1 less than advertised. I also wouldn't mind this thing being a bit deeper, to allow for more space for drive cables and cable management in general. I tried, but there's not much you can do. I will also mention that the power led is is ridiculous and will light up a whole room. I believe the sheer luminosity of the thing will come across in the pictures. Overall, it works and I wish there were more options for this use case that were of a litter higher quality but not hundreds.

The case gets the job done but it needs some serious redesigning to make this a 5 star product. First you can only use HDDs that had the three screw points to securely screw the HDD to the mount as only the rear and middle screw point can be screwed in (this is awful if you don't have HDDs with those mounting points). Second the handle is plastic which can break if not handled incredibly careful which isn't something you want in a heavy server chassis. Third the front panel connectors could be redesigning as some ports are not super glued in while others are, the USB ports also interfere with installing the main bracket, and since it is very thick it's impossible to bypass it, I had to remove mine because of how annoying it was to fit it back in with that USB port. It also only comes with one intake fan in the front which isn't ideal. It's cheap so I can't really complain but if they fix all these issues for only $100 I'd say it's 5 stars.

Wanted a cheap case for my server setup, for the price, this one seemed to fulfill everything I needed. Like other reviews have mentioned, the front IO cables run through the drive mount and I tried to reroute it but didn't like the way it felt so it does in fact take up a drive slot. And not sure if there was a case redesign at some point, but my case came equipped with 3 fans pre installed, a 120mm in the front and 2 80mm in the rear. The rear fans being 80mm was surprising because the manual states it fits 60mm and other reviews say 60mm but 60mm was too small when I tired to replace with noctua fans. Other wise it fits my setup and an overall good case.