12V Max Cordless 2-Tool Combo Kit with Drill/Driver and Impact Driver (CLPK22-120)

I've been quite a Makite-snob for the majority of my life. I know Bosch products have a great reputation for quality and dependability...after watching several YouTube videos on these drills I decided to give it a try. I actually bought two sets of these, one for a gift and the second for us. After I charged them we put them to the test. We drove multiple 3" screws into various woods to see if the impact driver could handle basic tasks...it did with ease. We then continued increasing the length and diameter of the screws just to find it's limits. In the end, we were screwing 10", 1/2" lag bolts into pressure treated posts and the impact driver performed flawlessly to my surprise! We were initially using our 18v Makita impact driver assuming the 12v Bosch would not even come close until the Makita battery died. Rather than wait for our Makita to charge, we decided to give the Bosch a try...to our surprise, the Bosch actually was able to drive the 10" bolt 80% of the way into the pressure treated post! We built a pergola over the past week and we used a combination of both the Makita and the Bosch drills...the Bosch performed fantastically! These drills are an absolute MUST for every homeowner and even professional contractors. Let's be honest, 98% of the jobs we do around a house are not focused around driving 10", 1/2" lag bolts into pressure-treated wood; most jobs are hanging pictures, doors, windows, etc. These drills are lightweight, perfectly balanced, fit great in both my hand as well as my wife's hands and are less cumbersome to carry than my Makita. We find ourselves reaching for the Bosch over the Makita when it comes to general DIY projects around the house just for the size, weight and portability, and overall power of them. I'm still hooked on my Makita but Bosch has absolutely found a permanent place in our workshop and we will now continue buying additional Bosch and Makita products as needed.

Update: Just adding another testament - I recently completed a rebuild of my porch steps and used this set quite a bit for pre-drilling and then driving in deck screws. The battery life and power are pretty amazing on both tools, with the impact driver handling nearly 150 3-inch screws into pressure treated lumber on a single charge. ***initial review*** I've had this set for a few months now and can't find anything to complain about (rare for me). I was originally looking for a smaller drill to replace an old, massive Porter Cable cordless drill. Saw this set on sale with a free set of driver bits and thought, what the heck, I'll probably never use the impact driver but why not? Turns out I was wrong - I use the impact driver all. the. time. Just installed an over the range microwave, a project that involved drilling pilot holes as well as driving in large wood screws and bolts. This set made that a breeze, with the tools' compact size being a significant advantage. Long story short, this is a good set for the average DIYer. The tools are relatively lightweight yet still pack some power. The lights are a nice touch, the ergonomics are good, and the batteries hold their charge a long time. My only regret is that I didn't buy something like this earlier. I fought with that old Porter Cable for far too long.

I use these as an aircraft mechanic and among my coworkers with many different drills these definitely stand out. Screws on airplanes are never really tight but they often have stripped heads.That is where the impacting bit driver is perfect. The hammering action starts with very little resistance from the screw which is not true of higher voltage impacts. The hammering action almost pounds your phillips bit deeper into the screw and after about a second of gentle but firm hammering the screw is free. I will only use the impact to remove stubborn almost stripped screws as when installing it has no adjustment and will over torque them to quickly. The RPM on the impact is just ridiculously fast but still easy to control. Its also great to use it for nuts and bolts on projects not airplane related with a 1/4 inch drive socket to bit adapter to just snap on sockets. I read reviews saying they received drills with a wobbly chuck. Mine is straight. the drill has good speed for drilling sheet metal in second gear and good torque in first gear. The adjustable clutch works like it should. I have it on 5 most the time and it places the screws with equal torque. These drills came with the higher MAH batteries. (2.0 amp hour) and the slow charger which takes one hour to fully charge a dead battery. The quick one takes 30min so not a huge difference. The only negative I have on the drill is its locking chuck that locks when you are off the trigger seems to turn about an eighth of a turn before actually locking this can sometimes be annoying as I often break the torque by twisting the whole drill before pressing the trigger. I am learning you can press the trigger to take up this slack then twist the drill. Its fine just takes some time getting used to. What makes these great is the size I get to use my drills way more often and get jobs done faster than my coworkers because their drills just wont fit in the space or inside the panel. I charge the batteries about every two weeks because I only use them for delicate light duty aircraft screws they seem to last forever. If the drill battery dies in a job I switch it with the one from the impact which gets used less then charge both batteries a few days after that. I really want to get another drill only for use around the house. It comes close to replacing the common hand held screwdriver because their size, grace and ease of use.

I am an apprentice automotive technician. I primarily use Milwaukee tools for other applications This is by far the most useful gun (if not best tool overall) in my toolbox. I use it for everything. I don't know the specs, but it's extremely useful for low torque applications (like interior work) and low-mid torque applications without ripping threads (like reinstalling brake rotor screws, removing pan bolts from transmissions and engines, removing plenums, undoing hose clamps, opening and closing air filter boxes without damaging the air box etc etc.....) I don't use the drill as much as I do the driver. I mainly use the drill for tire work and recapping threads, but it has proved very solid as well. Both of these tools and batteries are very compact, especially when compared with other big name tools. I bought the brushed motor version, but it has held up extremely well. I've been using it almost every day since is bought it 6 months ago. A single charge on a battery usually lasts 9-12 days with moderate use, and then when i do charge it, it is only on the charger for 45 before being ready for another 9-12 days. The value of these guns is unparalleled, especially with 2 batteries and a charger provided.

The drill is heaftier than I expected. It easily drills 1/4 in holes in 1/4 in thick steel. The chuck on mine is true with no wobble. Nice size and feel in the hand. Low speed control with the trigger is outstanding. The impact driver is new to me. I have an old nicad Makita 12 volt 1/2 inch impact wrench that I compare it to. The Makita has about 60 ft-lbs of torque, so very comparable. For nuts and bolts, I like the old Makita better simply because it holds the sockets more securely than the hex/socket adapters. For driving and removing screws however, the bosch is my new go to tool. I like the way the impacts holds a philips bit in the screw head. I do not understand why the hex bit has so much axial slop, but it doesn't seem to affect function. I like the torque and again the lite speed control is outstanding. The case is a complete POS, hence only 4 stars.

This combo is an amazing value. I use it all the time, batteries stay charged for a long time. I've built a 9ft cedar fence, gate, 30 ft of planters and knee walls, framed, hung pipes with straps and used it in all sorts of situation. When working with tools for extended period of time, esp. overhead, you want a light tool (anyone who swung 24" iron pipe wrenches for a few hours knows how nice it is to use aluminum ones). This tool is compact, will fit in tight spaces that square-bottomed battery drills will not, is well built (I dropped it a few times), and keeps chucking along just fine. Impact driver is great. Drill is good - wish it rotated a bit faster, but for light drilling in wood, plastic, plaster and drywall - it's fine. Only nice thing would have been a built in belt hook of some sort, like the one's Milwaukee tools come with. It would make life easier when working on a ladder or using one hand to hold something in place while having to put the drill down. This is however, not a big deal. You can get a drill holster for a few bucks (maybe $9 here on amazon), and you are in business. Just wear some pants with a belt. Also, do get one of those extension chucks - it will really let you get into tight corners.

So, I got tired of dragging my power lines across half an acre or so just to drill a few holes. Yeah, okay, had a battery drill some years back, battery always seemed to be drained when wanting to use etc. so did not expect much here. However, shock and surprise! But maybe should not have been - being Bosch - should have expected only top quality - and that's what showed up! Very cool, super quality. Batteries last quite a while too and don't lose their charge sitting. Very ergonomic and light weight. Fits right in the palm of my hand! Couldn't believe the power behind the impact driver! Wow! I would recommend this set - and the drill bit set too - to anyone that's ever been frustrated with a "battery powered" drill or impact driver. It ain't your uncle's! Not no more! Very sweet combo with carrying case and everything! I've used it a number of times now, and have been kicked by it - long battery life, power, and fits in my hand. Can't ask for much more than that. Oh, a carrying case please! They got ya covered on that one too!

Bought this kit after deciding to upgrade from my old Bosch Impactor. Similar design, same battery pack. I had my old one for over ten years. So I know this one will most likely be with me a while. I am also highly impressed with the drill as well. I needed something in my tool kit that was less powerful than my 20v, for more intricate work. It feels great on my hip and even better in my hands. Quite the nifty little work horse. I was slightly disappointed with the charger. However I have my Bosch 12V rapid charger and it works for these batteries, so not a real issue for me. Overall a fantastic set that I’d highly recommend, it’s ergonomic, durable and gets the job done.

I am super impressed with this light to handle but powerful set of drills great value and battery goes on and on , ,thank you

I had the 12-year-old bosch 18V drill and hammer drill -- plus the jigsaw. Very solid good equipment -- and very heavy. Batteries finally truly gave out but it doesn't owe me anything -- and they look like they went through a war anyway. This combo set is fabulous. The impact driver is amazing -- plenty of power and both tools are so light you don't even notice the battery. I'm super impressed and for a normal homeowner this kit is a great addition to the toolbox. The LED is really nice to have, and the drill has a great ratchet mechanism. I'm really pleased with this kit. I'll add the 12V jigsaw soon too.

El envío en mi caso fue gratis de USA a México por DHL ya que tengo prime. El precio de este combo se me hizo bueno en comparación con algunos otros sitios por ejemplo mercado libre costaba 3950 el más económico, en mi caso costo 2300 incluyendo importación y a 12 meses sin intereses. En cuanto a la fabricación que a muchos nos interesa esta herramienta es fabricada en Malasia, es una ventaja para mí que no sea China el único de manufactura china es el cargador; sin embargo baterías taladro y atornillador de impacto son de muy buena calidad en materiales muy resistentes y de alta calidad. Con respecto al funcionamiento el taladro su mandril está fijo al estar sin operación, lo que facilita el poder apretar muy fuerte una broca o una punta, tiene indicador de nivel de batería que se apaga a los 2 segundos sin utilizar, reversible con posición de bloqueo del gatillo, luz que dura aproximadamente 12 segundos después de accionar el gatillo, 2 niveles de velocidad la 1 es de 0 hasta 350 revoluciones por minuto y la 2 de 0 hasta 1300rpm. El atornillador de impacto es ligeramente más pequeño, a diferencia del taladro, viene con seguro para las puntas que funciona delizandolo hacía el frente así mismo también para liberar las puntas o brocas, la luz no se queda encendida, pero con un pequeño accionar se enciende sin que gire, la luz del indicador de batería en ambos casos permanecerá encendida alrededor de 2 segundos, en este pequeño atornillador las RPM son de 0 hasta 2600, la duración de las baterías no sabría decirles ya que eso dependerá de las cuestiones de trabajo, pero los 2 amperes a 12volts hacen de la herramienta de trabajo que no se atasquen con facilidad. Para mí el tamaño importa mucho ya que son muy pequeños y ligeros. Cómo último comentario en ambos las revoluciones son ligeramente menos al aflojar que apretar, y la luz de la batería se apaga al estar funcionando en continuo para ahorrar energía y vuelve a encender al volver a accionar el gatillo, desde luego que en mi caso todo esto está perfecto. Me encataron. Gracias.

Awesome set for easy home use. Have this same kit in the states so ordered it for our home in Scotland. Only issue I had was the plug converter didn’t work so had to buy a UK Bosch charger.

Bought this set bosch 22-120 on sell and for the price you will NOT find any thing BETTER, small, fits my hands very well, all the power you need, its the best set out there, just remember this is a 12 volt not a 18 volt, but its work like an 18 volt SO just go BUY it, Thanks Amazon for the very fast Shipping , A letter shipped from the same city by canada post takes almost a week, this from amazon 2 DAYS THANKS , TOM TOM